Likes
11
Share
Likes
62
Share
48 hours of FlashClean has done I'm gonna keep flashing with Flawless Finish for 5 days and only then cut Milky color dominating in every plant
Likes
Comments
Share
Super Bad ass Plant, I feel like That part on the Movie Pineapple Express, where he's like we are the only guys in the city that have this!
Likes
35
Share
Day 22 8/1/21 welcome to week 4 and most likely the last week of veg as you can see I am now SoGing and she is looking happy and healthy. I kind of wish I had a 4 in trellis and not a 6 in to start lol but it is what it is as always happy growing and keep your stick on the ice.
Likes
43
Share
Digital ballast broke while I was checking them, luckily I had a old magnetic ballast to replace it with. Did a little defoliation and tied a few branches in better positions, one plant in particular is huge compared to the others but did a good job of making sure it doesn’t overshadow the others. All going pretty well
Likes
6
Share
@Ciscohash
Follow
Esta semana fue genial las plantas crecieron todas muy parejas..teniendo por ahora mucha homogeneidad en el tamaño y forma de las plantas
Likes
40
Share
16/5/22: Week 3: VD15 for both. AN stands a little taller. But she comes of enzymes and TP goes on them this week, following their guidelines as far as when to give them the nutrients but I'm far of giving their recommend dose. 15.5 CM for AN GROW & 14cm for TP GROW. Both have been put into the 150x150x220 homebox and I have my 70x70x160 inside my big tent, this will allow me to keep the RH high in that tent while the photos veg and autos will be in full bloom. 17/5/22 both girls were topped above the 5th node. 18/5/22 Figuring out how VPD works. You could read for hours about this stuff and still not dial it in for years. But here's the basics. VPD 0.4-0.8 kpa for early seedling. So under or around 23c and around 50-60 RH. atm my VPD is 1.05kpa and for most of my plants the optimal range is .8-1.1 kpa. Temp is 80 F 25C and RH is 70%. To find the perfect VPD (Vapor Pressure Deficit)check out optimal ranges of VPD for growing stages, also your strain should have the optimal VPD. I don't have an infrared temp to check the LVPD (Leaf Vapor Pressure Deficit) that's a whole other ball game. Im not going to get too boged down at the moment with VPD&kpa. As I said that's in a whole other league. Im going to run a basic VPD environment though. In heavy flower my temp will defo be in the 26-28 range as I'll have the 20L dehuimifier in my 5x5x7. 22/5/22 Solid growth coming from these 2 ladies. 15+ cm growth in a week is great. Hopefully I'll get another 4-7 days of growth before they start flowering.
Likes
38
Share
Another good week. Watered them twice. I'm not planning on feeding them again. A little defoliation. I definitely think they are in the last 2 weeks before harvest. Still seeing some nutrient burn developing on the leaves. I don't think I watered enough through the whole grow! I'd love to hear opinions on this! Took some videos of the buds with an iPhone 12 at 6X magnification. Decent quality! Otherwise, still looking to successfully harvest these plants! Thinking about the next grow. Probably going to be Auto Strawberry Cheesecake and Auto Anesthesia. Peace!
Likes
6
Share
@1Prinz
Follow
25.07 Watering with 200 - 400 - 400 - 400 Used only 4ml/L TOP-Max (honestly I forgot about the fact, that I have to use the BioBizz Products only once in a week and I already added 4ml before I realized it…) 26.07 my neighbor complained about the smell one store under my balcony (told me he can smell it on the street 50 meters behind my balcony) 28.07 watering 400 - 400
Likes
22
Share
I am shocked at how beautiful these nugs are...I have never seen so many fat nugs in my life. Sticky, dense. I can wait until they are dried and cured. Update: found some mold on 4 of my nicest nugs, so i trashed them. A real shame. I had to go away for a few days and i think it was a combo of having dense colas, with a humidity around 60%. Live and learn for next grow. Still have plenty left.
Likes
7
Share
Que pasa familia, vamos con la cuarta semana de floración de estas Black muffin F1 de Sweetseeds. Vamos al lío, me quede con 3 por espacio, siempre pongo alguna semilla de más por si no abriese alguna por no perder ese hueco del indoor. También se trasplantaron a su maceta definitiva, en este caso de 7 litros y el trasplante se realizó correctamente. El ph se controla en 6.2 , la temperatura la tenemos entre 20/22 grados y la humedad ronda el 50%. Las jodidas han estirado bastante, ya veremos que ocurre como va todo. Hasta aquí todo, Buenos humos 💨💨💨
Likes
208
Share
@NO_DRAMA
Follow
Garden Of Eden ❇️🎍🌷🌸🌹🌺🌻🌼🏵️💐🥀 Grow on Earth. Grow with Mars 💚 🏡
Likes
37
Share
@Ferenc
Follow
Last couple of days... No watering from today, (Day 129) and the light will be switched off as well from tomorrow (Day 130) so I will harvest them approx on Day 132 or 133 on the 18th week :)
Likes
238
Share
@Roberts
Follow
Been flowering really well. Started to suffer some nitrogen deficiency when I backed off nutrition. So I upped it some yesterday. Smell great. Thanks again for likes, follows, and subscriptions on my YouTube channel. Appreciate the support. Happy growing.
Likes
18
Share
Seedsman Seeds Germination Report - Run 01: The White OG Journey Kickoff to Germination: The Start of Something Great! Welcome to the beginning of this adventure with The White OG feminized seeds from Seedsman Seeds. Excitement is in the air as we’re searching for strong, resilient plants, and this journey has all the best tools and tips. Starting with five seeds, we’re aiming for a solid beginning and maximum potential. Let’s explore every step in detail to make this grow as robust as it can be! Germination Process: Tools of the Trade TheCannaKan: The Ultimate Germination Gadget I’m thrilled to share my love for TheCannaKan, a little germination wonder! This tool is essential for any grower who wants to start their seeds with precision and care. I noticed rapid results in just 24 hours, with the seeds showing signs of life. At about 32 hours, I transferred them to the Root Riots, which brings us to the next exciting stage. Why I Love TheCannaKan: • Quick Results: Seeds sprouted rapidly, minimizing wait time. • Consistency: Keeps moisture levels optimal for uniform germination. • User-Friendly: Simple yet effective for both new and experienced growers. Root Riots and Their Role in Root Development After sprouting, I placed the seedlings into Root Riot cubes under a dome. Root Riots are fantastic for stabilizing young plants, providing an airy and nutrient-friendly environment that promotes robust root growth from the start. Benefits of Root Riots: • Root Aeration: Soft yet structured, these cubes support root expansion. • Moisture Retention: Holds just the right amount of water for growing seedlings. • Enhanced Root Health: The cubes are ideal for preventing damping-off and ensuring healthy, white roots. Nutrients to Kickstart Growth: Aptus Holland Regulator and Startbooster To give the seedlings a perfect start, I added Aptus Holland’s Regulator and Startbooster (1ml/L each). This mix promotes early root and stem strength, giving seedlings the ability to absorb light and nutrients more efficiently. • Aptus Regulator: Enhances plant resilience, aids in nutrient absorption, and promotes early vitality. • Aptus Startbooster: Adds a balanced mix of growth hormones and nutrients that are ideal for the early stages, encouraging healthy roots and faster seedling growth. Light and Environment: Future of Grow FOG LED with TrolMaster Tent X Controller I’m using a Future of Grow (FOG) LED at 600W, but keeping it dimmed down to around 200 PPFD. This setting is controlled by the TrolMaster Tent X Controller to give the plants the perfect start without overwhelming them with intense light. Controlled lighting helps seedlings to develop without stress, encouraging healthy growth and internode spacing. Shoutouts: • Future of Grow LED: High-quality, efficient LED light that adapts well to seedling and veg stages. • TrolMaster Tent X Controller: Reliable and intuitive control over light, humidity, and more. Perfect for a hands-off, efficient environment setup. Observations: One Seedling Takes the Lead At the end of this germination stage, it looks like one seedling has emerged as the strongest, while the others may need a few more days. Patience and observation are key; some seeds naturally take a bit more time to sprout. I’ll keep monitoring these with hope, allowing each seedling its own rhythm. Grower’s Notes and Tips • Consistency Matters: Germination is all about steady conditions—consistent moisture, gentle nutrients, and stable lighting make all the difference. • Document Everything: Keeping a log of each step (like this one!) helps track growth patterns and provides valuable insights for future grows. • Stay Positive and Patient: Not every seed will sprout at the same rate. Trust the process and remember each plant is unique. Community Shoutouts Thank you to everyone who makes this process smoother and inspiring—TrolMaster, Aptus Holland, Future of Grow, and Seedsman Seeds for amazing genetics and tools, as well as the growers’ community who share insights, tips, and encouragement along the way. Next Steps Now that we’re through germination, we’ll move into the early growth phase. I’ll keep documenting the lighting adjustments, nutrient changes, and growth patterns of each plant, especially that eager seedling leading the way! Growers Love, and here’s to a strong start for the future of this grow! 🌱 DISCOUNT CODE - SeedsmanSeeds - DOGDOCTOR 10% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚

 Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All and remember to keep that smile big and alive 💚
Likes
44
Share
@Zorachus
Follow
Finally, 25 weeks i believe... Mold, mildew, bud rot, rain, humidity, crazy wind, frost. Somehow these girls turned out just fine and I am so proud of the end result. I am late posting, everything is pretty much all cured up and ready to smoke. Just finished making some stocking-stuffer jars for friends and family for Christmas. It was interesting to see the different phenotypes from each plant. One was named Average Girl, medium size, medium height. Then there was Big Bitch. She was the tallest and had the skinniest nugs. Next was Dolly.. She had the fattest cones of the 4.. a little shorter than Average Girl. And last was Runt... She was about 2 weeks behind her sisters and about a foot shorter, but she did not get any mold or mildew, and her buds were ginormous. I let her go an extra 2-3 weeks later than her sisters, bringing her into the garage every night at 7 pm, and then waking up at 7 am to put her outside. By far, my favorite plant was Runty. She finished up so nice. Overall smell is Kushy blueberry diesel cat piss with a hint of citrus. Wouldn't grow this strain again just because it did not handle the weather well, and I like a kushier final product, on the taste and nose. That being said, I am a very happy guy right now. Over and out.
Likes
5
Share
@Naujas
Follow
this week was not very favorable, not much sun, rather cool nights 12°, but the girl is growing a little :) she still has a lot of time :) so for now everything is fine:).