Watered today everything is looking good! All strains developing distinct scents now. Fat Banana has a Sprite like candy smell. The Blueberry Swirl has more of a lemon zest smell, was hoping for blueberry scent but hopefully it will come later. Tropical Cooler has the smell of a rotten fruit salad. Lemon Haze x Garypayton has more of a berry scent. Defoliated Blueberry Swirl, their were too many popcorn bud sites so I cut the branches off.

She was a stretcher and it hurt her production taking it as my fault till I see what the clones do Two years ago we began with an LSD harvest and now we end with one, rather fitting. Clones combined wet weight 720 grams in dry over next couple of days 173 grams dry from clones

Week...12🤠 So we're getting cold mornings, days are still sunny and worm She's a strawberry..well sorta speak😁 but tbh, I don't like the look of her😕 I did some re-tying, so she has a flatter and a bit more even canopy (you can't see that on the photos) and found what has been eating my leaves, cute but annoying🤠 I've also tied some string to the branch wires so it all grows level with the ground I know I said I won't, but I had to, so I did..I cut some leafs. She had to many whitch needed to go, so I decided to cut them before she starts to flower I've watered her with 17L of water, ph 7.15 because of my bad soil Also soon in the next week or two I'll start making my drying box, hopefully my plants won't die before harvest😁🤠 Looks like that's it for this week, it was a good week in terms of growing, so I'll see you next week!🤠

Hey now, I hope everyone is having a safe weekend. The ladies are still doing well, and starting to pack on some weight. The Sundae Driver, Bubble Runtz, and Durban Nights still look like they will be the biggest yielders, with the Green Crack 2.0 and Red Hot Cookies being on the lower end in yield, but I am definitely looking forward to having so many strains to sample and to share with friends. The Bubble Runtz looks like it will have the most dense nugs and smells absolutely amazing already and we are still probably 3 weeks out or so. I am thinking 2 weeks to ripen , then another week MAX to flush in the Coco Coir. I am still feeding silica, cal mag, maxi bloom, and liquid kool bloom. I will switch to the dry kool bloom this week week then I will flush with plain water for about 5-7 days before harvesting them around mid December. I am running two full size dehumidifiers outside the tent currently just to keep the relative humidity in the tent right around 50% or slightly below. I also have two very powerful fans blowing one above and one below the canopy to keep the air moving as well as an 8" inline fan keeping fresh and cool air into the 5X5. I am still taking a few fan leaves here and there but mostly just keeping the reservoir full, and cleaning it once per week which only takes 10-15 minutes. I mix one 5 gallon bucket of nutes per day and dump it in the reservoir and then they auto feed 4 times per day. I hope everyone has a great rest of your weekend, Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled

Day 0. New start. Sponsored grow. ALL NUTRITIONS ARE GRAMS TO LITRES !!!! Neutralise is in real measurement only. Soil was mixed two weeks ago !!! That line needs cooling time, have in mind !!! Main sponsor of this grow is Mars Hydro. They sent me new light again, this time i will try out TSL 2000 model. First impression : easy to assemble, but i would create longer screws and put spacers , that way would ventilate better than now its bolted straight to board. Ganja Farmer sent me few strains to try out, while i finally prepeared , got few more from them ;)))) Devil XL Auto is the first in try list. Never had good luck with funky colours plants, but in this run it will be two ;) Day 4. Girl sprouted on forth day, lets GO !!! Day 5. Made a video, all runs smooth, a bit lanky, needed to put lights on on 3rd, not 4th day ;))) saving electricity not always pays off ;) Happy Growing !!!

8/01/21: 😹Week 3!!! We decided to low-stress train one if the Big Bud plants 🌱 and top/mainline another (at node #2), all 3 plants are being fed lightly this week with FF Grow 5ml/gal and 10ml/gal of the their guano solution...we've gotten very off-lable with how we use the Fox Farm trio but it seems to be working ok..all 3 seem to love their new veg space... thanks for reading, will update midweek! 😽❤️💡🌱 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 08/04/21: 😼We removed to bottom set from the mainlined plant and we're low stressing the other 2 plants.. our goal is to keep 1 mother from this bunch and start with clones asap 😽

Update week 3 veg

Week 7, one more week and i will harvest this precious girls, they dont require lot of attention and even slightly less nutrients would have done the trick! I still have 1 of these ladies in veg so i now what to expect and what to do! Great strain, very generous with very little attention, the perfect strain, a very nice sweet smell, it reminds me of candy very sweet, its going to be delicious for sure!

She’s really starting to put on that weight! Terps are absolutely wonderful!

Day-43. Girls looking good. Still in the transition. One of the StarD girls has really had a growth spurt. Using next to no nutrients. 02/05/18-Day 48- Very pleased with fast buds, my first AUTO grow and they are taking off a treat, much easier to grow than photoperiods. But then again I treat them similar in terms of just defoliating as normal and LST'ing. Probably a little bit more sensitive to nutrients.

Week is going good aside from me accidently cutting off a stem on pheno 2. If I can properly save the cutting though I might have a chance at another female. Pheno 3 I'm hoping can make some comeback as I really want to flower the plant, its not dead by any means but the way its growing I just cant see it allowing itself to flower the top leaves were barely growing so I topped. Hopefully positive changes within the next week.

Lemon tree got a unique growth, nodes are close to one another

Waiting for first signs of life … While we are, I thought I’d give you a short explanation on the software’s graphics in case you did not follow my first diary. The one to the upper left, as its headline says, is the temperature graph. Most important line is the red one, showing the leaf temperature measured with an infrared temperature sensor. As there are no leaves yet, it is pointed towards one of the pot’s wall at soil level. Air temperature from a sensor that usually hangs around somewhere around top level is violet, and the grey line is the outside temperature close to the tent, helping the software to determine if a main blower action will effectively lower temperature. As I learned from the first grow a plant day that corresponds to the natural day can cause enormous gaps both to temperature and humidity, I inverted the plant day now, starting their night at 11 a.m. So after the first day temperature will only vary around 1.5 °C, which is of course due to the low light intensity too. Humidity graph on the upper right is quite crowded. Main line is the blue one, tent air humidity, which on this first day was between excellent 65 – 70% most of the time. For the moment humidifier is electrically disabled. There is quite some excess humidity on the tent floor and no reason to push this any further. Outside air humidity is grey again and taken from the same outside sensor that reports outside temperature. The soil humidity sensors are simple analogue capacitive sensors which have their flaws. I am interpolating their measurements to have a somewhat smoother reading, but as you can see from the turquoise humidifier reservoir reading (in legend named as plant soil hum 1), they can get confused when humidity is very high and start to report random numbers for some time. The most important graph for all growing stages is the lower left one, where the pink line meaning plant VPD should be inside the green optimum range for somewhat perfect conditions. This cannot be attained all of the time – dehumidifying isn’t as easy as humidifying –, but software tries its best to do so. Outside VPD is grey again. The last graph is more for amusement than anything else. The light intensity sensor is hard to position correctly, and everything you see about illumination and DLI (orange and green, plus grey for the accumulated 24 h DLI) should be taken with some spoonful of salt. Any resemblance to real world professional instrument readings can be considered purely coincidental. The violet line is the CO2 reading from such a sensor, and you can see that its tiny peaks correspond to even tinier black peaks at the bottom of the graph, reading TVOC values which in this case, once they will be more than possible measurement irregularities, can be interpreted as smell. ------- End of week 1: All seeds germinated. I wasn’t at home most of the time, and it turned out using the humidity sensor to monitor the humidifier’s tank wasn’t good for the stability of the system. Arduino crashed, so there are no pictures yet and no graphs to show. I have the feeling light was a bit low as the seedlings grew a bit tall, but with lights now up to 20% I guess this problem is fixed. More tomorrow when I have some more data to share. Even more end of week 1 (I extended this week to 9 days as I cannot tell when the seedlings started to show): Lights are at 40%, meaning 40 W in total. No reason to give them new water until next week. As some flies showed up from the BioBizz soil, I added 2 yellow cards. So far, everything in normal ranges. I’ll switch the control to grow phase soon which will raise the VPD slightly by 0.5 kPa. It’s interesting to see the CO2 level started to climb by 50% during their last night and has not come down to baseline afterwards. I restarted the app to check if the sensor had lost its calibration, but it still sits at around 660 ppm now.

Harvest in week 12. But I screwed up, I didn't have enough room to separate each variety, so I would put an average weight when everything was dry... I had done everything well, I had to mistake on the place of the drying bag Last pictures, mixed buds

The fungus gnats are getting a little better. To bad they already did a lot of damage. Plants 3 and 4 have now caught up in height with plants 1 and 2 which are a month older. The buds and plants 3 and 4 are way bigger too. Flowers are starting!!! Loving it!! Defoliated at the end of the week.

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.

Ab den 13:11 ab zum trocknen. Da freue ich mich

Shes getting bigger 😄 weather is also slowly gettin better👨🏽‍🌾 she is a little bit younger as my Zkittelz plant, but i think she is a Little Bit Slower as the Zkittelz. Maybe too much Stress.

I don't know where to start and I must admit I'm completely overwhelmed by this beautiful beautiful plant ❤️❤️❤️ Aaaaaaaaaaaaaaaaaaaaaaaaaaah, I'm so happy 😍😍😍 She is a blessing! Excuse the outburst, but she is magical ☀️ I applaud you guys at Humboldt for creating such a wonderful strain 🙌 Some details upfront, before I rave some more: - 134 Days in total: 70 Days in Veg, 64 Days in Flower with 128W LED in a 60x60x160cm tent - 7 Days Drying regularly, 9 Days Drying in the Fridge - 432g - Wet weight with stems - 103g of those for Fresh Harvest Infused Oil - 190ml Olive oil with 30mg/ml THC & CBD - approx. 20g dry (for dry weight calc.) - 87g for the DrZiggy's Low And Slow Drying in the fridge - 20g dry - 242g for regular Drying @50% RH and 22°C - 55g dry - 30g dried sticky trim in the freezer Summary of my growing experience with this strain: She takes well to massive training and a little neglect in the beginning, meaning she recovers well, which is what I want 😊 I didn't experience any major deficiencies. She had a little nitrogen deficiency during the later veg phase, which she showed with lighter green leaves. I blame this on my long veg time and my pot size of only 11l. She consumed all her soil and nutes by the end of veg. I will keep that in mind for my next grow. Since I increased my nitrogen levels so close to flowering phase, I overdid it a little on the nitrogen which showed a little bit during later flowering phase with downwards clawing leaves. So I will be more careful with nitrogen especially while transitioning into Flower. I did not flush this plant and she smokes already beautifully mild after only a couple of days of curing. Drying her took 7 days in the tent and 9 days in the fridge. She crusted up with lots of stickiness while drying and gave off a good bit of scissor hash & kief when trimming. Smoking her is a great and different experience to me. It's my first time with a 1:1 strain and I can definitely notice the CBD content. She shows in a very well balanced body high with a slight and gentle knock on the THC door. The first couple of days I felt a craving for higher THC which settled down after only a couple of days. Very interesting and definitely worth growing. So you guessed right, I totally recommend growing this beauty. Especially if you are interested in exploring a 1:1 THC:CBD strain with all its magical medicinal values 🙏 Why I grew this strain: Like @Experimentgreen on here, I grew this strain for my Mama ❤️ She is open minded to trying to solve some of her health issues with these beautiful plants and the magic they bring but she also likes to have a bit of fun, she doesn't mind. So a 1:1 strain was quite handy. She suffers from neuropathic pain, arthritis in her joints, restless legs and insomnia. All very relatable issues and perfectly suitable to be introduced to some good CBD and THC content. She already has a little tolerance, since she is treating her restless legs with gummi bears I made with a strength of 1.5mg/gummi bear. This small dose already helps her on a daily for her restless legs. Beautiful 😍 So with this special mission in mind, I wanted to process the plant with only the very best options and create Cannabis Oil (Capsules) for my Mom to take. I chose a method called "Fresh Harvest Infused Cannabis oil" by the wonderful member SweetSue over at 420magazine: https://www.420magazine.com/community/threads/fresh-harvest-infused-cannabis-oil.363371/ I hope it's ok to relink, no need to duplicate already existing and well researched content, right? I will not go into detail and def. recommend reading through the whole thread. I only document the short version here, but feel free to ask me, I'm happy to share my experience. The oil I made has 30mg/ml of THC and CBD. That's a good value. I calculated the strength the following: 75g fresh Flower in 200ml Olive Oil - with 10% CBD&THC 85% extraction efficiency with the infusion method 85% * 10% THC&CBD = 0.0850 0.0850 * 75g = 6.375 gram of available THC & CBD 6.375gram * 1000 = 6375mg/THC 6375mg/CBD 6375mg/200ml = 31.875mg/ml CBD & THC I created capsules with 3mg per capsule. We are currently trying to find the right dose for her. She started taking one capsule 60-90min before bed for 3 days now and will increase by 1 capsule tonight. We continue until a max dose of 15mg/day but always re-evaluate how she feels. She's documenting her experience quite cute. Very heartwarming and powerful. So far she sleeps better and she falls asleep faster, which she hadn't done in a long while. Onset is pretty precisely between 60 and 90 minutes. She has not had any restless legs so far. I'm excited for her and can't wait to see where this takes us. I also made her a salve/creme she uses as a topical on her joints. When she uses it early enough, before the big pain hits, she feels it helps. Of course this is not a science study and everything is purely based on personal experience. I thought I share, in case anyone is interested, also I want to give back a little, since I consume so much knowledge from all over the internet, including here, so thanks 🙏

Week 6 Veg Report – Runtz We Meet Again! Another week, another step forward in our Eternity Grow Cup 2025 journey, and oh boy, do we have a lot to unpack! These Runtz girls are showing their potential, and we’re dialing in every little detail to ensure they thrive. Let’s dive deep into everything that happened this week! Cal-Mag Deficiency Adjustment – Pheno #5’s Special Needs This week started with a close inspection of our phenos, and we noticed that Pheno #5 was showing early signs of a calcium/magnesium deficiency. Whether it was slightly off VPD levels or this particular plant being more demanding, we decided to correct it by increasing the dose of RO Water Conditioner. Now, while this isn’t a direct substitute for Cal-Mag, it does contain trace amounts that can help stabilize the situation. 🔬 Understanding Cal-Mag Deficiency: Calcium and magnesium are essential secondary nutrients. Calcium strengthens cell walls, preventing issues like tip burn and weak stems, while magnesium plays a critical role in chlorophyll production, allowing plants to efficiently absorb light energy. 💡 Signs of Deficiency: • Yellowing between veins (Magnesium) • Rust spots on leaves (Calcium) • Slow growth and weak stems ⚡ How We Address It: • Slightly increasing RO Water Conditioner to see if trace minerals help • Keeping an eye on overall nutrient uptake to ensure no lockout • Monitoring VPD (Vapor Pressure Deficit) closely to optimize nutrient absorption Let’s see how she reacts next week! Branching Development – Pheno #2 Leading the Race All five phenos are thriving, but Pheno #2 is showing the most aggressive branching, pushing outward faster than her sisters. However, overall, we’re seeing very uniform growth, which speaks volumes about the stability of these genetics. 🌱 What is Branching & Why It Matters? Branching is the plant’s way of expanding its canopy, increasing surface area for photosynthesis, and maximizing potential bud sites. Well-structured branches allow better airflow, light penetration, and more even growth—key for a successful high-yield harvest. ⚖️ Topping vs. Leaf Bending – The Training Choice Instead of topping, I’ve decided to go with leaf bending for now. This method allows for gentle manipulation of the plant’s growth without causing major stress. Once we introduce the SCROG (Screen of Green) net, this training will help maximize the canopy spread. Moving to the TrolMaster Ecosystem – A Game Changer Big move this week—our Runtz girls officially transitioned into the TrolMaster Ecosystem, and let me tell you, they are absolutely loving it! Under the ThinkGrow Model 1 LEDs, they’re thriving, leaves praying upward, soaking in that optimized spectrum. 💡 ThinkGrow Model 1 LEDs – Why They Work • PPFD of ~400 µmol/m²/s at their level, running only on Channel One • Full-spectrum lighting tailored for optimal vegetative growth • Passive cooling design, keeping temps stable while saving energy Environmental Conditions (Measured on the TrolMaster Tent-X and the AMP-3) • Temp Max: 26.6°C | Min: 16.2°C • RH Max: 77% | Min: 52% • VPD Max: 1.65 kPa | Min: 0.43 kPa • Solution pH: 5.8 • EC: 0.96 • Water Temp: 16.3°C Why These Numbers Matter: • Keeping VPD in check ensures efficient nutrient uptake • pH and EC levels fine-tuned for maximum root absorption • Water temp stable to avoid root shock and slow growth Autopot System Prep – Getting Ready for the Next Phase The week wraps up with us cleaning and preparing the Autopots for their next phase. These self-watering systems will allow the Runtz girls to access water and nutrients at their own pace, optimizing growth as we head into pre-flower soon! A huge THANK YOU to Zamnesia, Plagron, and GrowDiaries for making this incredible Eternity Grow Cup 2025 possible! Also, a big shoutout to my main sponsors, thank you for keeping this journey running: 🔥 Aptus Holland – Precision nutrients for peak plant health ⚡ TrolMaster – Bringing automation and accuracy to the grow 🌱 Pro-Mix – The foundation of strong roots and healthy plants 💨 The CannaKan – Premium solutions for top-tier results Grove Bags – Revolutionizing post-harvest storage & terpene preservation 📜 Ziggi Papers – The ultimate rolling experience And of course, a massive thank you to the community—followers, supporters, lovers, and even the haters. You ALL fuel this journey, and I appreciate every single one of you! 🚀 Good luck to all fellow competitors—watching everyone’s grows is inspiring, and the competition is fierce! 📢 Join the journey on YouTube & Instagram for exclusive content, behind-the-scenes action, and more insights into this epic run! 👊 Let’s keep pushing, learning, and making history—see you all next week for another deep dive into the Runtz We Meet Again grow! 🌿🔥 💚 growers love to all 💚 Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol MAster https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags