The Grow Awards 2026 ๐Ÿ†
Likes
Comments
Share
10/23: Fed today with one, signal, sweet & sticky, silica, beastie bloomz, and a little ca/mg. 10/27: Fed today with one, signal, sweet & sticky, silica, beastie bloomz, kangaroots, and humic acid. Lowered the lights to no more than a foot from any cola..most are 7-9" away.
Likes
3
Share
The girls are not happy with the temperatures we have here at the moment. It is very hot! Hopefully some extra silicone will help them dealing with the heat. Otherwise both girls look great. The mainlined plant is getting some long colas. She might end up having better yield in the end...
Likes
4
Share
Going to harvest in a week. Plants are fading beautifully! Looking like a pack of skittles with all the purple yellow red colors.
Likes
1
Share
flowers really packing on weight this week. I've had to tie up supports and stripped off quite a few of the older fan leaves. I've started the flush this week to go with the strain timings. any flush advice would be appreciated.
Likes
29
Share
@Reaper
Follow
day 15 (december 19) start of week 3 roots everywhere plant starts to take of now, the hydro is slightly bigger then the soil plant day 17: the hydro plant made a new set of leaves in just 2 days! day 19: i cut off the lowest leaves of both plants. i do this because on any autoflower these leaves produce a stem that wastes a lot of energy on small nugs. day 20: hydro plant got topped (3nodes) day 21: soil plant got topped (3nodes) same strategy with the topping, i do this early (i could pinch them off with my fingers) to reduce the time to recover. the plants bounce back like they didnt feel it and with the lowest leaf and small tiny stems cut off, these plants will produce 6 main stems with nice big and dense buds instead of a huge christmass tree with more leaves than bud.
Likes
2
Share
Big Momma has finally been transplanted, this is the mother plant of our East Coast Punchers and you can safely assume that she is a house favourite! I (TOH) have claimed her as my own, I was more than happy when I found a pile of boards that could be made into a single plant bed. I love repurposing and reusing, as you can see C.C. put together a small square bed that is tall enough to keep the dog from watering her himselfโ€ฆ The bottom of the bed started with a piece of cardboard (brings the worms) followed by a good amount of soil from previous fabric pots (gotta reuse), the worm castings along with the fish shit was added and the top half of the bed was Stepwell Super Soil. A good dusting of myco4 was added to inoculate the roots, the bottom of the infinity pot was removed and she was placed on top. We had quite a good rain last night with a bit of a gust so she was braced by bamboo before bed, she has dropped about 3 inches so more soil will be added to top her up. Now the fun can begin, I look forward to grooming her into shape and the therapy she is sure to provide will be priceless for me because a busy mind is best kept busy! ๐Ÿ’šโœŒ๏ธ
Likes
6
Share
Hey growmies, It's been four days since the last short. Today, the Pink Gelato finally started drinking water again. Looks like the cinnamon and light watering actually helped. The other plants are doing okay, but the heatโ€™s getting to them too. I think harvest time is coming up soon โ€“ just gotta find the right moment to start drying. All three plants got two liters with Cal-Mag today. Fingers crossed they all pull through!
Likes
6
Share
Hoping to have more space soon when I chop my gg4 sherbert , I have four plants in flower in one tent and its pretty overcrowded and too humid as a result. The gg4 is not fading or maturing as fast as I would like but I guess I'm just gonna have to be patient
Likes
46
Share
@Biggy2k20
Follow
Slowly slowly catchy monkey ๐Ÿ˜‚ looking good for its final week, pistils are now starting to change colour. Fox tail is still present but not too bad. This week will be the time for the snip following magnesium deficiency and a flush of 0 ppm water via 7 stage filter.
Likes
15
Share
Now we've reached day 34. We are now in flowering, we are guiltily carrying with us a bit of vegetative over fertilization but we are sure that we have worked well and that the flowers will not be compromised. The good news is that the plants are exceptionally vigorous and practically do not need fertilizer in the vegetative phase, and it seems to me to be excellent quality. We wait to see the flowers and you will see... Our Wurlz F1 per mea culpa mea culรจa mea grandissima culpa shows some signs of overfeeding, the famous yellow tips of the leaves. Let's be clear, this is minor and is due to the fact that these genetics are so good that they need very little or no fertilizer in the vegetative phase. Then if you already have fertilized soil, forget about growing guys, another pro! I gave the recommended doses even a little less to tell the truth of both Aptus and Plagron and the plants more or less all have these small signs of over. LITTLE guys, wait until the end to save if you feel like it, or at least I recommend it. To fix this little thing we go to flush with pH 6.2 and only give Aptus Regulator which should rebalance the plant and soil before delicately moving on to fertilizers for flowering. Site Description ZAMNESIA SEEDS - WURLZ F1 HYBRID AUTOMATIC: EFFECTS TO LEAVE YOUR HEAD IN A WHIRL! As the end product of combining Runtz with Watermelon Candy, Wurlz F1 hybrid Automatic showcases a reliable, uniform, and, above all, easy growing experience. The resulting buds offer mind-blowing flavors and soothing effects, making Wurlz F1 Automatic more than worthy of being on your radar. GROWING WURLZ F1 HYBRID AUTOMATIC As an autoflowering strain, it takes just 9โ€“10 weeks for Wurlz F1 Automatic to move from germination to harvest. Fortunately, there's very little required other than a bit of maintenance along the way. This is partly due to the F1 genetics that make this strain robust and uniform, resulting in plants that reach a similar height and provide a similar (large) yield. Moreover, Wurlz F1 Automatic is highly resistant to disease, pests, and other ailments. Reaching heights of about 65โ€“80cm, Wurlz F1 Automatic is not an overbearing plant and can fit into smaller spaces with zero fuss. Once ready to yield, growers have the potential to see a return in the region of 450โ€“500g/mยฒ indoors and 50โ€“150g/plant outdoors. AROMAS, FLAVORS, AND EFFECTS OF WURLZ F1 HYBRID AUTOMATIC Now we've reached day 34. We are now in flowering, we are guiltily carrying with us a bit of vegetative over fertilization but we are sure that we have worked well and that the flowers will not be compromised. The good news is that the plants are exceptionally vigorous and practically do not need fertilizer in the vegetative phase, and it seems to me to be excellent quality. We wait to see the flowers and you will see... Fertilization for flowering has started again otherwise there is a risk of going from excess to deficiency. Site Description ZAMNESIA SEEDS - WURLZ F1 HYBRID AUTOMATIC: EFFECTS TO LEAVE YOUR HEAD IN A WHIRL! As the end product of combining Runtz with Watermelon Candy, Wurlz F1 hybrid Automatic showcases a reliable, uniform, and, above all, easy growing experience. The resulting buds offer mind-blowing flavors and soothing effects, making Wurlz F1 Automatic more than worthy of being on your radar. GROWING WURLZ F1 HYBRID AUTOMATIC As an autoflowering strain, it takes just 9โ€“10 weeks for Wurlz F1 Automatic to move from germination to harvest. Fortunately, there's very little required other than a bit of maintenance along the way. This is partly due to the F1 genetics that make this strain robust and uniform, resulting in plants that reach a similar height and provide a similar (large) yield. Moreover, Wurlz F1 Automatic is highly resistant to disease, pests, and other ailments. Reaching heights of about 65โ€“80cm, Wurlz F1 Automatic is not an overbearing plant and can fit into smaller spaces with zero fuss. Once ready to yield, growers have the potential to see a return in the region of 450โ€“500g/mยฒ indoors and 50โ€“150g/plant outdoors. AROMAS, FLAVORS, AND EFFECTS OF WURLZ F1 HYBRID AUTOMATIC After Wurlz F1 Hybrid Automatic wows you with its easygoing growing experience, the best is yet to come: the smoke test. Teeming with terpenes, this cultivar offers a fruity and candy-like flavor tinged with just a little bit of pine for good measure. In terms of effects, Wurlz F1 Automatic is bolstered by 24% THC and a finely tuned array of cannabinoids, making for a soothing, physically relaxing, and, in larger amounts, couch-locking high. So settle in with some of your favorite friends, snacks, and movies; this is relaxation at its finest. As for fertilizers, I'm doing a small comparison experiment to finish off the fertilizers I had at home, it's not 100% indicative, it's only on two specimens but given the stable genetics I decided to try to compare the results of Plagron Vs Aptus , both excellent brands which they will certainly produce beautiful plants which are already of excellent stable genetics. In the next few weeks the comparison will be more evident now the seedlings are still very small and just potted. So seeds of all brands, in addition to these great F1 Hybrids and the entire Zamnesia line, fertilizers and everything related to the world of cannabis, you should buy them from the best online store in the sector www.zamnesia.io
Likes
28
Share
@Vincent11
Follow
Hi fellow Organic growers. Another week gone and we are into really early flowering. Will be starting Royal Queen Seeds Bloom tablets this week. She stretched so nicely this week that she feeling up her 11 pod, I was also able to do LST every other day. I used HST on 2 middle branches just to slow them down and be able to LST them to. All looking great so far. Day 25 from seed extensive LST with slight defoliation. I am expecting another 2 weeks off stretching so will only LST slightly for better light penetration and air circulation I am happy how she has spread for me by now and with all the potential bud sites she looks stunning. Midweek update day 29 from seed sprouting. Last 4 pictures in diary. Think I have a happy plant. Started Bloom 2 days ago. Hope you all have a great week and Happy Growing Buddy's.
Likes
Comments
Share
@Chamed33
Follow
Just feed her ph water for the last couples of days Iโ€™ll be chopping her down this week due to heat wave in my area .. wish I could let her go few more days At this stage sheโ€™s releasing nitrogen still
Likes
501
Share
Week 1 went off perfectly, purples babies reaching WEEK 2! ๐Ÿ˜ PRESENTATION OF THE LADIES ๐Ÿ˜ ------------------------------------------ The four plants are the same genetic. But they already have a different look, and I would introduce them to you :) 1) The Ugly - She have terrible first leaves. But she isn't late compared to the other. So I still believe in my Ugly! 2) The fatties - 2 of them grew wide leaves. It's just about leaves shape for now. 3) The solar panel - This one grew less wide but longer leaves. Regarding the Ugly, I must say that for the 4 seeds, I had to manually remove the shell when they sprouted. They all had their shell on after sprouting, and I don't like that. Probably a bit old seeds? For now, they share the same needs, and seems all happy. But this might change. I may even not be abble to recognize them, except if I cheat on them by putting labels on their pots ^^ ๐Ÿ’ง WATERING ๐Ÿ’ง ------------------ Luckily, the weather is offering some rains, and I been abble to put the ladies out under the rain during day 7 and 8. Not that long, they still got watered on Day 8, some hours after the rain. With feeding for the first time! ๐Ÿ— FEEDING ๐Ÿ— ------------------ First feeding. Used Fish-mix at 0.8ml/L. I plan to have a second watering in the week, but without nutrients. That's why I written 0.4ml/L in diary settings. If you know me, you also know that I like Fish-mix, but that I'm also effraid of it ^^ As foliar later during veg, it's an awesome products, easy to see that plants love it. But it seems verry powerfull, and need to be used carefully when given to plant. My rule is to limit to 50% of recommended dose. For now. Anyway, Fishmix right after a rain must turn on every form of life in soil I believe ๐Ÿ˜€ Even life coming from rain. ๐Ÿก GROWING CONDITIONS ๐Ÿก ----------------------------------- Starting an indoor session on the end of summer seems a good choice for me: - Some rains that provide me better water - I can put the ladies out if verry sunny, to save electricity/money - Perfect temps in the grow room. My house is always windows open. โ€‹The growroom lightup in the end of the afternoon, when the day get cooler - Plants will flowering indoor during winter. I need heat during winter, so thanks grow room :D And cold air mean verry dry air! So reaching low humidity on the end of flowering will be verry easy! Pests : Nothing to report for now. I'm expecting a visit of my good old friends the thrips in 2-3 weeks ๐Ÿ˜Ž Grow tent & Light (XS2000 ViparSpectra) : Something I notice just now: I'm abble to close the grow tent without air-extraction. I never been abble to do that in the past. This light is waaaay more efficient, and produce way less heat, because I couldn't keep tent close with my previous Mars Hydro TSW2000. Don't be effraid, I still renew the air in tent multiple times a day ;) ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ Thanks for reading guys :) Thanks for crossing your fingers last week, as you can see.... it worked! PS : Improved my skill with my new camera. But except more and more better ones as I practice ^^ ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ๐Ÿ’œ Update Day 13: Plants watered with PH 6.2 water. Look at that Hugly... She really have a problem ๐Ÿ˜… I'll try my best with her ๐Ÿ™Œ
Likes
2
Share
Likes
30
Share
@SAC87
Follow
Day 63 Flower Well weโ€™re coming to the end of the grow cycle. These plants are looking great. Theyโ€™re starting to get a bit of purpling on the leaves and trichomes are clouding up. I flushed with 7 gallons of plain water with typhoon cleanse. Itโ€™s stripped about 300 ppm per gallon, got my runoff down to 110, and probably do an RO flush if I need to push it longer. I am very happy with the stank, quality, density and trichome coverage on these buds. The smell is a ripe sweet lemon with and earthy hazy musk. Could use more lemon but Iโ€™m not going to complain. My house is rank and can be smelled outside even with the carbon filter going 24/7. Iโ€™m super excited to see how the effect is on this strain. Itโ€™s one of my all time favorites and Iโ€™m pumped that it has turned out to be quality!!! Happy Growing ๐ŸŒฑ
Likes
2
Share
Hallo zusammen, Woche 7: Lรคuft alles wunderbar, super Strain! Ph beider Pflanzen kommt langsam in den 6,8 Bereich, die vermeintliche รœberdรผngung relativiert sich, wobei ich so langsam glaube das es eher ein Lichtstress war, als die #2 noch grรถรŸer als die #1 und nรคher am Licht stand
Likes
209
Share
@BioBuds
Follow
Great to see you and I missed you, I had some time so I created a video to thank our lovely foster company, who were so kind to let us try their light in return for a review. Now, most of you don't know I'm also into making music, mostly Techno but I also love HipHop and Gangster rap, mainly 90's Westcoast, although I'm fond of East Coast and a little dirty South, so this was an excellent time to showcase one of my tracks. So please check my Autumn-themed, not commissioned, or approved by Mars Hydro, visualization video in thanks for @MarsHydroLED. The grow has been going great! If you don't count the about a thousand fungus gnats I have been fighting. I'm manually manifolding and training the girls, into the desired shape, which is a bit hands-on but I see it as a collaboration more than a 50 shades approach to training. You can't just bust out a rope and domination on girls like that. We ease it in there, going to the limit every time, making them stretch and curl underneath the touch of our tender but firm hands. And when they are used to a little groping and fixation, we might bring out a few ropes here and there to spice it up a little. Anywaaaays.... I'm getting carried away here, back to the grow. I had bought some coco-peat, after leaving none for the top layer as I suggested to all of you in the previous weeks of my grow (if you missed it, click one week back for a full recipe (the yellow image) for everyone in Europe) left me with enormous amounts of fungus gnats. Its seems to alleviate the problem already. As it did with my previous grow the Gelato 33 Golden Canopy from Heaven. In the meantime I notice my temperatures going down so Im trying to fix that too. All in all it had been a good week and this Orange Hill Special is promising to become something special! Thanks for visiting again, see you soon!
Likes
20
Share
@GR0WER
Follow
๐Ÿ‘‹Hello, my friend!๐Ÿ‘‹ If You reading this, sign up to my profile, I will be pleased! I download new photos and comments updates every day! It will be nice to walk true this grow of my two Fast Buds 'Banana Purple Punch' auto flowers together! I asking a lot of grow questions and take part in a life of this grow community. New week starts! ๐ŸŒž28.11.2022 Today I came home and saw my smaller one showing four stigmas in the upper knot. I was afraid of she already starts flowering, but mates from 'Grow questions' made me kalm, answering that she's just showing her gender. It's too early for flowering and thet's how all autos do. Thank You, my friends, You've saved my nerves (as usual). I have watered my girls with full pack of GHE nutrients, including 'GHE Diamond nectar' and 'GHE Mineral magic'. Solution ph: 6.0 Drenage ph: I forgot to drain vater from pot's bottom and after four hours it was gone. So I'll measure it next time. I've done some more LST and sprayed them with 'GHE SeaWeed'. ๐ŸŒž29.11.2022 Today I asked one more grow question: 'Why all new brunches on my autu flowers has triple fingerd leaves?' Mates told me it's a fault of my substrate Ph and I can do some flushing to fix that. I took one on my girls (#1) and made this procedure deeping a whole pot in a bucket with 10 liters of ph5.9 water. Maybe it's some kind ob a black magic, but it did NOTHING. Inflow: ph5.9 Outflow: ph6.7 Substrate ph after 3 procedures: 6.9 I gave up. I'll not doing this to #2 and let them grow in that cursed substrate till the every end. I made small defoliation after all of this to bouth of my girls. Lowest leaves (first floor) was cut with a brunches growing from it. Also I cuted one fingered leaves of a first week. Results are on downloaded photos. ๐ŸŒž30.11.2022 Photos downloaded. Mb its my mind tricks itself but I noticed #1 starts growing faster after flushing. It was smaller than #2 and now it's almost the same size and even looks thicker. Tomorrow we'll see it more closely and I'll flush #2 if it's true. I watered #2 with full pack of GHE and sprayed them bough with 'GHE SeeWeed'. Also my BPPa#2 showed her gender today (stigmas on a upper knot). Yep, we have a girl here! ๐ŸŒž01.12.2022 It's a 'rest day' today. Nothing to wright. (Photos downloaded) ๐ŸŒž02.12.2022 I made some LST and sprayed my flowers with 'GHE SeaWeed' solution. Substrate ph rised by ph0.1 and now it ph7. It's critical already, especially when my BPPa#1 starts to show stigmas everywhere - almost in every knot. I think pre-flowering starts soon. She looks soft and wobbly, I think there is a deficit of some elements. But my substrate still wet, and I can't do anything. Tomorrow I'll make them both to bath in ph5.5 nutrients solution - and it's only thing I can imagine to do now. Relying on the best, waiting for tomorrow. ๐ŸŒž03.12.2022 Today I watered both of my plants with 'GHE' nutrients (TriPart + Fulvic acid + Roots stimulator + Selicates) and sprayed 'GHE SeaWeed' on the leaves. Also, I think I finally resolved my cuestion: 'Why ph of substrate don't want to go down?'. I take my water from kitchen crane, it has ~ppm110 and ~ph7.5. But clorine in this regular water slowly makes the reaction with asid I use to low it's ph. And slowly but surely ph of solution rises. I noticed this by making ph5.8 water and waighting 24hrs - ph of solution became 6.7 the next day. My previous grow I used distilled water only and thet's why I didn't know about this problem. It's a pity I made this guess so late. But it's better late then never. From now I will make ~ph5.2 water immediately after watering and it will react till next procedure (2 days). It's ph should rize above 0.9-1.0 by this time and become near ph6.0. I already prepared water for the next feeding - clear, without any nutrients (by now) and ph5.25 on it's start. Today my solution measurements looks like this: - Substrate ph before watering: ~7; - Solution ph: 5.8; - Solution ppm: 680; - Solution EC: 1.1; ... - Substrate ph after watering: ~6.9; - Drenage ph: 6.7; - Drenage ppm: 710; - Drenage EC: 1.03. ๐ŸŒž04.12.2022 The 'rest day'. My experinent with water ph was sucssessful. Now I know how to treat usual water to feed my flowers correctly. My next grow will be nearly perfect. And also, it's my first (and last) grow using autoflowers seeds. I don't like a grow process ether a future results. Regular flowers are what I can grow the best. So I'll stay on a 'photo' side of a force (after this auto grow ends). Week ends.