Likes
Comments
Share
@DevilsBud
Follow
FLOWERING STARTS In the the new marshydro set-up 120x120x200 4'x'4 FC-4800 lamp Pubes are showing on all of them happy days in the absolutely amazing marshydro tent 👌🏻💯👌🏻 and no balls in the room yet so that's good at least i know that first grow i had issues with hight but with my 120x120x200 that not going to be end problem so stretch like ya never stretch before 💪🏻 i am prepared now lol the FC-4800 is a beast and still tweaking hight dimmer don't want to burn them but also want to utilize the lamp as much as I can but will get under control 🤘🏻😎🤘🏻 1/11/21 Did some last defoliation and spread the plants out bit Tru the tent got lamp dialed in dimmer around 55% and hight around 45cm above the plants and every week will bump up the dimmer with 5% they are looking very good healthy and i am very proud of the results so far gave the proper nutrients and the normal watering in between everything cool in the hood Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
60
Share
@Clutch
Follow
Back to moving the plant in and outside. Bad weather coming up😕 This week was average, a few good sunny days but also cold nights. Started up with the green sensation and alga bloom. There are fan leaves that are showing a pretty quick yellowing. Not so healthy and green anymore now 😁This is maximum week 5 of flowering so it's a bit too soon to be losing leaves like that.. I'm Thinking she has a N defenciy because I barely gave grow nutrients since it was in the soil for the first 6 weeks. Second thing is a lack of light for those leaves. the Alga Bloom has N in it so I hope they revocer it a bit. The leaves on the buds themselves look good so it's probably the plant using the leaves for nutrients in this stage. Let me know what u guys think....? Update, look at the video, dirty bugs😠😠😠 caterpillars I think🤔 took away some infested leaves. And some of those fuckers. Hope it doesn't get worse Buds are starting to thickening, she has a little smell on her too by now. They already have some brown pistils on them. Nice plant but I hope the yellowing doesn't go to fast. 1,5L water with 4ml alga bloom and 1ml of green sensation was given this week. Will continue to give this for the next 3 to 4 weeks. Happy growing friends.
Likes
9
Share
@Scilef
Follow
Daily report: Day 1. Watering: NO Stats: Humidity: 70% Temp: 27.2 Notes: I want to see how often should I water Heracles. I fucked up with pH and maybe with watering frequency. I want to fix that. Also set the board to 100%. Day 2. Watering: NO Notes: Defoliation went a bit too aggressive, but it looks fine and I hope that it will help weaker stems to grow faster. I will let Heracles to heal tonight and feed her only tomorrow's morning. Day 3. Watering: 5.7 pH 1550 ppm (1.25 l + CalMag) && 5.8 pH 1320 ppm (2.3 l + CalMag) + 5.7 pH 1120 ppm (1.6 l + CalMag) Total 5.15 l => 5.9 pH 1720 ppm (1.25 l) Notes: This morning pot was completely lightweight and dry. Heracles looks amazing. Day 4. Watering: Night - 5.8 pH 1190 ppm 3.5 l (+CalMag) => 6.0 pH 1890 ppm 0.7 l Notes: New leaves still has yellow marks between veins. I don't know what should I do with that - neither MgSO4 foliar nor CalMag in the mixture helped. Currently 1.5 days is the comfy period for feeding schedule. Day 5. Watering: NO Notes: I found signs of overfeeding (and not only me found that), so next mixture will be less concentrated to let Heracles relax. Also, I bounded all tallest stems to the net to place all the grow spots at the same height. Day 6. Watering: Morning - 5.7 pH 761 ppm 4.5 l (0.75% of Base +CalMag + 1 l of plain water) => 6.1 pH 1750 ppm 1.1 l Notes: I am still trying to create a flat screen of greens. Very excited of flowering stage, it's almost here. But wtf is going on with ppm in drainage?! Day 7. Watering: Night - 5.8 pH 1040 ppm 4.0 l (0.75% of Base +CalMag) => 6.0 pH 1930 ppm 0.8 l Notes: I am run out of a free space in my growbox. Why does not blow starts?
Likes
6
Share
Such a top quality strain 🔝 very very terpy, stinks like OG kush, rock hard dense nuggets, they're literally rocks. Very frosty nuggets, full covered in resin flowers. Those orange hairs just make her irresistibly delicious 😋 I just can't wait to smoke such a high grade. This is gonna be a good year. Hope to always have this lady in my garden every year 🤤👨‍🌾💎🍪
Processing
Likes
10
Share
WOW!!! She's f'ing huge!!! Definitely the largest auto I've ever grown. The bud sites are still in early development but she's beautiful. However, I think she's suffering a little from the heat in the attic (where my grow tent is). I'll be moving her outside in the next week or so in an effort to help her out. Hoping for the best! 🙏
Likes
32
Share
@Arcadium
Follow
Uneventful week, hot, dry, defoliating a little inside, drip every 3 days, still doing foliar spray for pests. Flower sites are slowly developing, really just beginning. Should easily be finished be end of Sept.
Likes
29
Share
@nonick123
Follow
Día 41 (03/06) Riego 750 ml sólo H2O pH 6.2 Empieza a engordar sus cogollos 😍 Día 42 (04/06) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 Está apilando y engordando sus cogollos, y empieza a mostrar senescencia en la hojas inferiores. La veo capaz de acabar en 8-9 semanas! El tiempo lo dirá Día 43 (05/06) Riego 750 ml sólo H2O pH 6.2 Día 44 (06/06) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l +TopBooster 0,2 ml/l - pH 6.2 Día 45 (07/06) Riego 750 ml sólo H2O pH 6.2 Está empezando a mostrar tonos morados en los cogollos! 😍 Día 46 (08/06) Riego con 750 ml H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 El tamaño del cogollo central es impresionante 💥😁 Día 47 (09/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
7
Share
Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Anesia Seeds, team davvero al top, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! Come sempre partiamo nei bicchieri per poi travasare.. Questa volta verrà svolto tutto sotto la Lumatek Zeus 465 ProC, mi aspetto molto da questo ciclo!! Purtroppo ho perso i file delle scorse settimane e dovrò reiniziare il report da ora scusate per il disagio Grazie a tutti per il supporto ❤️🍀🔥
Likes
6
Share
Привет садоводы растение выглядит на отлично и имеет красивые формы верхняя кола выше остальных веток цвет листьев хороший вот только горшок маловат быстро пересыхает попробую пересадить
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 25/10/2019 - First feed I gave her 0.25ml on 250ml of water of Biobizz-Grow, with 6.5ph. 26/10/2019 - Leafs looking a bit crooked, and some pale spot lets hope its not fungus. (gave her 100ml of just PH 6.5 water) 27/10/2019 - Feeding day, gave her 250ml water with 0.25ml Biobizz Grow, 6.4PH (changed feeding to once every 2 days with a plain water interval) 28/10/2019 - Started LST 30/10/2019 - Feeding day, gave her 250ml water with 0.25ml of each Biobizz - Grow,Bloom and Max, 6.3PH, added carbon filter and it raised the temps to 29c 31/10/2019 - A tad too much of nuts, little burn tip. (Sensi Seeds warned me but I still goofed it)
Likes
18
Share
Hola gente! Esta semana recien comence con fertilizante de crecimiento, comence a ver los brotes nuevos muy amarillentos asi que le meti un poco de ferti. Van super bien creo yo, les hice corte apical a alas 3 al día 33 de vegetación, la #1 es la que mas me gusta hasta el momento, #2 tiene mucho espacio internodal para mi gusto pero igual va bien. Estan empezando a generar olor, como a menta al tocar las hojas, me gusta!
Likes
17
Share
@Naujas
Follow
it's amazing, this growth looks much better than my first attempt, my decision was to put a smaller pot and change the light - the girl really liked it, FastBuds goriilla cookies with a small space manage perfectly:).
Likes
5
Share
@Jubaea
Follow
Last time I did defoliation Now I hoop to get a big harvest of 200gr dry weight will be nice
Likes
12
Share
@Lysidious
Follow
Was bummed out plant got red mites at the end but that’s fine, it didn’t not impact the grow (or at least I didn’t notice.) Harvested at the end of the 6th week of flower. Trichomes had already started turning amber due to heat degradation (couch lock party) what trichomes that were not dust ridden or amber was milky so I’d say it’s ready. Choosing the best time to harvest is still puzzling for me due to the fact that this is my 4th time harvesting cannabis. Thanks for reading... more info to come ...TBC
Likes
2
Share
Woche 5 Die Ladys wurden ein bisschen entlaubt und wachsen sonst sehr stabil, bin soweit zufrieden. Noch ca 7 Wochen liegen vor uns 😊
Likes
12
Share
@Pedro_88
Follow
Estoy muy satisfecho con el crecimiento de mi chemical bride, ayer hubo un fuerte viento y tumbo a mí watermelon skittlez no la pude encontrar, pero ya tenemos otra en proceso que verán en estos días
Likes
4
Share
@Sadom
Follow
08.08.: Blütetag 1 Heute habe ich nur noch die Triebe unter das Netz gebogen, damit alle ungefähr auf einer Höhe sind. Da der Platz nun sehr gut durch beide Pflanzen ausgefüllt ist, ist der Moment gekommen die Blüte einzuleiten. Die PBB hat schon so viele Stempel, sodass es so aussieht, als wäre sie schon in der Blüte. Daher denke ich, dass die PBB nicht lange für die Blüte brauchen wird. Wir werden es sehen. 12.08.: Blütetag 5 In den letzten Tagen seit Umstellen des Lichtzyklus und Einleiten der Blüte, sind beide Pflanzen ein gutes Stück über das Netz hinaus gewachsen. Aktuell gibt es nicht viel zutun. Leider sind einige Thripse auf den Pflanzen, aber ich habe bereits Raubmilben ausgebracht. Hoffentlich können sie die Thripse etwas in Schach halten. Außerdem habe ich die Bewässerungsdauer auf 20min, wenn das Licht angeht und nach 6h Beleuchtungsdauer, gestellt. Falls das nicht ausreichen sollte kann ich immer noch händisch nachgießen oder die Bewässerung anpassen. Den Beleuchtungsrhythmus habe ich so gewählt, dass abends um 10 Uhr das Licht angeht und morgens um 10 Uhr aus, damit die Lampe nicht während den heißen Sonnenstunden brennt. 13.08.: Blütetag 6 Die Stretchphase ist bei beiden Pflanzen noch voll im Gange. Aktuell wachsen sie durchschnittlich ca. 6cm am Tag. Ich bin gespannt, bei welcher Höhe sie ihren Stretch beenden. Das nächste Update gibts dann in Blütewoche 2.