🏆 Last chance to vote!
Recommended
Processing
Likes
8
Share
@Fergie
Follow
hey guys so here arw my 2 LSD 25 coming along nicely . 1 is in a 5 gal and 1 is in a 10 gal smart pot , awaiting new tent arrive in a few days so can re home and allow to florish .
Processing
Likes
88
Share
@Fergie
Follow
hey guys so finally the swap to flower is here . these girls are expolding . i am waitinf on one 20 gal pot and a new tent to move rest autos in should be here in a few days fingers croseed . All going really well on this clean run with no nutrients so far .til next week 😀
Likes
82
Share
Week 7 Flower We've finally started flush 💦 on Day 43. I still run EM1 at 1ml/ltr as it goes a long way once activated/stretched. It's always going to be a benefit to keep any microbes you can in the coco. You can also use Mammoth P throughout flush, but due to its price I just stick to EM1 in flush. There's plenty of other microbes that can be used too. I flush around twice the pots' volume at 6pH. But before flooding the pot I slowly pour water through the centre of the pot, around the stem, in order to take a true reading of the ppm and pH of the run off. If the ppm/ec reads a lot higher than your average feeding throughout bloom, then there's been issues such as a lockout, incorrect pH, over feeding etc. This wasn't the case, as this girls' was at the right level. If the pH is too high or low, I adjust the pH of the rest of the water that'll be flushed to try to fix it. Again, this wasn't the case with this girl as she had a perfect pH 👌👍 Just before all of the water has gone through the pot, I take one last reading from her last bit of run off. The ppm should be down to no more than 100ppm for the first flush (+starting ppm of water if using tap water). After the first flush the ppm value of the run off will quickly go all the way down to 0, or at least below 50ppm (+tap water ppm). I use tap water that is between 150-190ppm, but I'm looking to switch to RO as soon as I can. I still get a very good flush, but I think using RO water will be the next step in getting a more thorough flush as it won't contain even the small amount of nutrients and metals that tap water contains (along with any harmful chemicals). Always remember to bubble or let the water sit for 24-48hrs before feeding to your plants. That goes for all feedings in every stage of growth if using tap water. Because I keep fairly low temps in the Den she's starting to turn a beautiful dark purple. Her buds are still swelling and smelling like a nice gassy OG, with hints of citrus/tropical fruits. I'm really looking forward to taking this girl down, but after at least another week! Thanks for following and happy growing! 🐺
Processing
Likes
52
Share
2nd week complete! Its growing day to day, with noticeable changes. Im waiting one more week before I switch to 12-12 and change it to the 12L container. I've been watering every 2 days, about 50 ml each time I water. One feed, one water, thats the schedule. I noticed that there are a lot of bud sites developing in the branch formation, so excited!! 👻
Likes
3
Share
@Fergie
Follow
Hey guys so here is my blue cheese mutant starting to beef right out ww . some pure dank smells coming from her am super phyced to taste this girl .
Likes
190
Share
@Herbalize
Follow
Hello folks Havest Day 64 of flowering ( Life cycle 99 days ) Drying with 62% RH--18/21°C since 10 Days Now everything is in jar and in a week or more, I would add my little boveda pack 62% for a good storage Overall everything went well ! The Moby Dick 1 give me 115g of dry buds The Moby Dick 2 give me 97g A very good weight with 400w, really impressive,and look at these colas😵💪 The taste is good but not my favourite, i dont like the haze aftertaste I think ,1 month curing will improve that 👌 Thanks to all who comment / like either to encourage or give advice GD community are The Best 🙏😻 see you soon guys 😘 Peace Love and Weed00
Processing
Likes
20
Share
She is doing great. Starting to put on her bulk. Today I have her a tea that I brewed for 24 hours. It consisted of be-1 pellets, be-2 humics, worm castings and grokashi. She has been praying to the light and loving life.
Processing
Likes
20
Share
She is doing great. Starting to put on her bulk. Today I have her a tea that I brewed for 24 hours. It consisted of be-1 pellets, be-2 humics, worm castings and grokashi. She has been praying to the light and loving life.
Processing
Likes
5
Share
@Blakoby
Follow
This weeks a little early, wanted to show the cut. Going to flower in 1-2 weeks depending on how she recovers.
Likes
82
Share
Week 7 Flower We've finally started flush 💦 on Day 43. I still run EM1 at 1ml/ltr as it goes a long way once activated/stretched. It's always going to be a benefit to keep any microbes you can in the coco. You can also use Mammoth P throughout flush, but due to its price I just stick to EM1 in flush. There's plenty of other microbes that can be used too. I flush around twice the pots' volume at 6pH. But before flooding the pot I slowly pour water through the centre of the pot, around the stem, in order to take a true reading of the ppm and pH of the run off. If the ppm/ec reads a lot higher than your average feeding throughout bloom, then there's been issues such as a lockout, incorrect pH, over feeding etc. This wasn't the case, as this girls' was at the right level. If the pH is too high or low, I adjust the pH of the rest of the water that'll be flushed to try to fix it. Again, this wasn't the case with this girl as she had a perfect pH 👌👍 Just before all of the water has gone through the pot, I take one last reading from her last bit of run off. The ppm should be down to no more than 100ppm for the first flush (+starting ppm of water if using tap water). After the first flush the ppm value of the run off will quickly go all the way down to 0, or at least below 50ppm (+tap water ppm). I use tap water that is between 150-190ppm, but I'm looking to switch to RO as soon as I can. I still get a very good flush, but I think using RO water will be the next step in getting a more thorough flush as it won't contain even the small amount of nutrients and metals that tap water contains (along with any harmful chemicals). Always remember to bubble or let the water sit for 24-48hrs before feeding to your plants. That goes for all feedings in every stage of growth if using tap water. Because I keep fairly low temps in the Den she's starting to turn a beautiful dark purple. Her buds are still swelling and smelling like a nice gassy OG, with hints of citrus/tropical fruits. I'm really looking forward to taking this girl down, but after at least another week! Thanks for following and happy growing! 🐺
Likes
10
Share
This girl was a treat to grow. A little scary when I first broke her branch but she recovered well. She is pungent and quick to stink up a room. Covered in trichomes. I have sifted her trim for kief and it was very flavorful through my vaporizer. She is a couple rh% points away from curing. Can't wait until I get to really smoke/vape and enjoy her. She was so delightful that I decided to do a really slow dry and cure. All is well :)
Likes
190
Share
@Herbalize
Follow
Hello folks Havest Day 64 of flowering ( Life cycle 99 days ) Drying with 62% RH--18/21°C since 10 Days Now everything is in jar and in a week or more, I would add my little boveda pack 62% for a good storage Overall everything went well ! The Moby Dick 1 give me 115g of dry buds The Moby Dick 2 give me 97g A very good weight with 400w, really impressive,and look at these colas😵💪 The taste is good but not my favourite, i dont like the haze aftertaste I think ,1 month curing will improve that 👌 Thanks to all who comment / like either to encourage or give advice GD community are The Best 🙏😻 see you soon guys 😘 Peace Love and Weed00
Likes
7
Share
@dreamer08
Follow
I've been putting this grow diary off for too long. I'm somewhat new to growing, so it would help to have some of you share your thoughts as we progress through the next few days/weeks. I've got a few strains going in my grow space. A mix of a couple autos and photos. This diary is all about the Auto Blow Dream by Victory Seeds. I'm using a 3 gallon fabric pot, fox farms trio and this plant has a 1000w (185w draw) BestVA FS LED dedicated to it. Soil is a simple mix of peat moss and perlite, with some fishmeal and bonemeal added.
Likes
43
Share
Increased the amount of nutrients in the feed this week and got a little bit of burn on V, Nemo handled it no problem! removed the yellow spotted fan leafs as part of general defoliation for this point in flower. Continuing to pluck and tuck, meaning removing extra fan leafs (plucking) and bending tallest colas back under the scrog (tuck). shooting to keep all budsights 18 to 22 inches from the light to prevent burn and allow healthy development. I can see where proper distance has been kept best development has occured.
Likes
71
Share
@TOTEM
Follow
Will be harvesting today or tomorrow. After one week of flush, I stopped every watering since the start of this week. Now there’s less water inside the pot, and I can definitely feel it by moving it around. Buds are visibly bigger now! See you soon for the final harvest!
Likes
43
Share
Increased the amount of nutrients in the feed this week and got a little bit of burn on V, Nemo handled it no problem! removed the yellow spotted fan leafs as part of general defoliation for this point in flower. Continuing to pluck and tuck, meaning removing extra fan leafs (plucking) and bending tallest colas back under the scrog (tuck). shooting to keep all budsights 18 to 22 inches from the light to prevent burn and allow healthy development. I can see where proper distance has been kept best development has occured.
Processing
Likes
Comments
Share
Processing
Likes
27
Share
The plants have reached a stage where they have enough foliage and growth on them to begin training and defoliation. I cut most of the side growth and major fan leaves off. Using safety pins and twine, I started their LST.
Likes
1
Share
@Mr_Maes
Follow
For sure this strains genetics are strong. She is really blowing up with growth. Almost a foot tall and extremely strong structure.
Processing
Likes
6
Share
@Mr_Maes
Follow
This girl is by far the healthiest plant I have ever had at this stage. By healthy I mean she is the biggest, the greenest, and has the thinckest stem I have grown yet. Today is day 28 from seed and she is as thick as a marker lol. I grow in small 5 gallon pots. My stem is normally as round as a milk jug cap. I feel like this could do better.