Likes
Comments
Share
@DevilsBud
Follow
New week for the 2nd grow
In the new marshydro set-up
Enjoy the video be warned it can get LOUD 😉
there all looking amazing in there own way for separate details per plant go to there diaries 🤘🏻
I believe the new FC-4800 wel i KNOW
This lamp is out of this world for sure it will get your so frosty so quick i was afraid i did something wrong lol nah she is just a absolute BEAST .
AND THE 120X120X200 TENT
Is great for the grow that have going on now there snug like bug in there no netting needed 🤘🏻 the control of heat and humidity is easy as can be winter is my time to grow no problem what so ever
visit www.marshydro.eu
for your best gear and use the PROMO CODE: DEVILSBUD
Some info about the Marshydro FC-4800
Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j.
Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area.
Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time.
Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system.
Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation.
And some tent info
●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all.
●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal.
●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air.
●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy.
●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
18
Share
@Onlygrow99
Follow
Bueno pues hoy lunes 17/04/23 empezamos la 7ª semana de floración y son en total 86 días desde que empezamos a germinar todo esto.
Las plantas no paran de pedir mas y mas comida, vamos por 2.0 de ec y pienso subirles mas... quizás llegamos a 2.4 ¡veremos!
Están siendo nutridas con la gama completa de Boom Nutrients y voy aumentar la dosis de Floración BOOM, de Candy BOOM y de BIG BOOM. PIENSO EXPLOTAR TODO ESTO JAJAJA
También hay 3 automáticas de CBD que se llaman Purple Wookiee CBD como ya sabéis, pero esta semana no las he fotografiado, en la próxima os las muestro.
Y bueno, en 2-3 semanas mas empezamos a lavar raíces y a cosechar en breves!!
Likes
5
Share
@Ninjabuds
Follow
These pound cake auto seeds are 100 off rip.
I put the seeds in some paper towels on nov29, then put them in the pro-mix potting soil on dec2. Now it's dec4. Only 5 whole days sense. I put the seeds in paper towels, and they have already been born into this world. Thanks, fastbuds, for the seeds. Ever since I saw the seed drop with the pound cake auto, I have had my eye on this strain. I have really wanted to grow a plant with giant giant huge nugs, and I have yet to do so. I have high hope for these guy. I'm only allowed 12 plant and have 10 plants in other other tent. So I will be tossing one of them later 2day. I plan on only bringing one if them to flower. This is my 1st real auto grow so I'm testing the waters in a spare 2x2 tent with my spider farmer 100 board light the newer one with the evo leds.
Thanks for reading
Likes
20
Share
@Chubbs
Follow
420Fastbuds
FBT2305 Week 1
Week 1 of the start of veg for these 2 FBT2305 plants. So far I've switched to 18/6 light cycle and keep a 75'f day temp with a 65'f night time Temps. I give them 500ml of straight well water every other day. I did to a pm spray and didn't realize my lights would be coming on as soon as they did. Lesson learned it'll burn the leafs. 😆
All in all Happy Growing
Likes
1
Share
@SessionMeister
Follow
I am starting to train my automatics a little bit. The Photos are growing very well and are stretching quite a bit. Every day or two I have to rearrange the LST sticks to spread the canopy even more. Next Week im going on vacation for 2 weeks so im topping one of the automatics as it will be going in to flower soon anyways. This is an experiment on whether I can delay flower by doing that or if it just stuns its growth. One of the clones was also topped but as it hast alternating nodes it doesnt have the same effect as for plants grown by seeds. Still curious whether it has any positive affects on plants growth structure. For the next two weeks I will just let the plants grow and train and defoliate once I am back from vacation.
Likes
2
Share
@Delta9tetrahidro
Follow
Nuevamente repito siempre el mismo proceso en el cuidado de la planta en cada etapa. Siempre cuido el ph que para mí es lo más importante en este trabajo. Despúes todo lo demas se puede mejorar.
Likes
37
Share
@Alpengrower
Follow
this was my first no-till cycle and experience ever. im really happy with the results , great strain.
Likes
80
Share
@Ganjagrandaddy
Follow
Hi all. Welcome to this run withbthe Viparspectra XS1500 which i was kindly sent to try by their helpful rep Valerie. As I have a fairly good space to use for my main grow , it seemed an ideal time to explore a few options while I wait for space to appear following upcoming harvests. The opportunity hit at a good time and has now driven the future play time. lol
The light is a full spectrum 150W( at the socket) , Dimmable and very well made unit. As summer is here now , my concerns of more heat being an issue have stopped me from adding my other light so the smaller 2ftx2ft area covered by the XS1500 is a good option , The heatsink is built into the case design with a finned top to dissipate the heat so no noisy fans. Switching it on to full power was a nice surprise as the footprint was way wider than I had expected and the actual coverage is even better for my Nursery to harvest plan....
I am growing autos perpetually at present and have been able to throughput the plants with just 2 lights and using the overlaps at the edges to bring seedlings along to veg/flowering, as harvesting is finishing. The timing had been working well but the plants were getting smaller towards the last runs . I gave it some thought and Rh % came to mind. With the perpetual runs not having a higher rh in their veg periods due to other plants needing a lower Rh% in flower , the vapour pressure deficit (vpd) was not within veg periods healthier range. This current run has exploded and filled my normal space very quickly which in turn means I cannot use the same principle as the last perpetual run of bringing the next ones along ready for the exchanges. The XS1500 takes care of this issue with it being perfect for an initial nursery light that is easily covering all the new seedlings but is also able to cover my experimental "5 plant 1 Pot" attempt. I have placed 5 of my own autob seeds from a previous seeding in a single 60 L pot and intend to strip them to their 4th nodes and only allow 2 mains per plant to develop and flower. Inam hoping to have 10 mains growing in it that will be under the xs1500 solely as the other plants outgrow the lights footprint and space they are in. They will go into the main grow space once able so i can really see how well this new light can flower with the 10 mains to fill the space. Until that point , I will diary as we go and see what we can achieve.
Likes
7
Share
@Hommero75
Follow
Seed was in a cup with water for 72hrs when germinated.
Seed spent 2 days in soil before sprouted
Likes
23
Share
@Weedinho
Follow
Not much more work to do... I did some light defoliation today to avoid any popcorn buds and I think that’s it until harvest for all my girls. I’ll just keep watering them.
- The critical is the most advanced one... I’m thinking to harvest it in around 2 weeks... so I’ll be starting flushing soon.
- Northern Lights & Moby D have developed many stems and they are looking very even in height throughout the plants. They are not half the height of the Critical, but still have some additional weeks to go
Likes
24
Share
@Jays_Not_Here_Man
Follow
Week 7 of Veg for these beautiful Apple Betty ladies! It was a stressful week for the girls but they made it❤️
Day 44 - I decided the girls had outgrown their 2 gallon nursery pots and were ready to move on. After a quick cleanup of the stems close to the base, they were ready to go.
I like to keep my soil in a Rubbermaid bin, either with a fan lightly blowing, or the exhaust line from my tent blowing at it. Since I started doing this, I have not had any gnats or pests in my grows, of course with regular cleanings and IPM…my mix is Promix HP with about 20% worm castings added to it.
This time around, I decided to use some Dynomyco to increase the mycorrhiza count of my Promix HP. This will increase root development by adding all kinds of interconnected webbing and allow for better uptake of nutrients overall. Within an hour or so all of the ladies were transplanted ❤️ x2 in 7 gallon fabric pots, and 1 in a 5 gallon fabric pot ( the 5 gallon will finish in my 2x4 tent)
Once the girls bounce back and take hold of their new forever pot, I will be setting up my custom “floating” SCROG net and allowing them some time to get bent and tucked all nice snug before I flip to a flower schedule. Happy Gardening ❤️🇨🇦🌱😎
Likes
10
Share
@Waveydavey420
Follow
Plants are responding well with the gold leaf at 4ml per gallon. The reservoir is starting to have a strong bad smell on day 3. May switch back to ph'd water at 6.5, then add gold leaf at 10ml gallon every 3 days. They're drinking water like crazy. Iowered the light to about 20", running on 580 watt.
Likes
15
Share
@ThePotFactory
Follow
Just flushing the girls this week, waiting for most trichomes to go cloudy instead of clear. Ive now switched the lights off for 36/48 hours and will harvest in the next couple of days :))
Likes
4
Share
@k0nz1
Follow
The ladies are recovering well. Still adjusting the autopot system. PH drift is a serious thing in my container.
In the next days a final defoliation , LST and then flip to 12/12.
BBM is bushy AF
Strawberry AK just perfect for now
Radical Juice one small and one tall
Likes
2
Share
@I_Identify_As_A_Dan
Follow
Look at those roots!
I also believe I under fed mycorrhiza... because the roots on some of my other plants went insane... go check 😉
Flowers came out super nice too! Very lemony
Will definetely grow again.
Likes
14
Share
@SkunkyDog
Follow
Hallo zusammen 🤙.
Morgen kommt sie unters Messer 🤙😀.
Sie erhalten 25 Prozent Rabatt in unserem Shop
Mindestbestellwert beträgt 75 Euro
https://greenbuzzliquids.com/en/shop/
Code: GD42025
Likes
35
Share
@FreshCoastOrganics
Follow
These girls are just days away from harvest! I will closely monitor their pistils, calyxes & trichomes throughout the week so I can determine exactly when to give these girls their two days darkness before chop!
They are all starting to fade out really nice and the smell just keeps getting stronger each and every day!
After this last feed/flush I will only give these girls R/O-Distilled Water with nothing added whatsoever.
Please enjoy the videos I posted of the girls! Thought I’d add some music to the videos vs loud condenser microphone picking up fans 🤣 Only videos for now, I will post actual pictures and macro shots throughout the week before harvest.
Update: 9/7
The pistils and trichomes are about right where I want them. I’d say I have about 90% Cloudy, 7% Clear & 3% Amber Trichomes. A majority of pistils have gone from white to amber and have retracted. The girls have stopped drinking water so I transferred them to my darkroom to finish off for two days. After the two days I will chop and hang at 67°F @ 55%RH for 8-10 days until the stems begin to snap.
Processing
Likes
50
Share
@WsCalighost
Follow
Nice flowering stretch time to see some buds soon i guess.
It has stretched nicely i guess during the flowering period.
I have upgraded the tent size to 1m x 1m x 2m and seems to be better air flow and humidity levels.
Also changed the hygrometer to a AirComfort bluetooth wireless monitor which gives great detailed information on temps and humidity as per picture added.
Finally pistils have developed cant wait to see bud sites.
Likes
13
Share
@Danieledec
Follow
Hy huys
That's the sixth week after the germination...
I think next week I will change the light schedule and I'll start the 12/12
