Week 7 of flowering 4 Purple Push Pops PPP (grew 2023 outside). Clones from my clone guy 1000w LED, 4G Autopots,, coco/perlite 65/35, GH 3-part+ flourolicious, calimagic, SI, chelated iron, and humic acid , RO water, AC pro Controller and T8, 5x5 GG Tent with extension. Garage grow SoCal This week the girls had a hot week in the garage averaging 88°. We started filling out, got more mature, and started showing colors. We’re running just under 1000ppm with no issues. I’m having reservoir funk issues so I’m switching to jacks RO this week. .8g a day. This weeks accomplishments: Split electric load (safety) This week: Switch nutes upgrade reservoir and lines next week. Long term issues It’s hot. Straight 90s this week. So the same - Cooling and VPD targets during heat waves Preventing pest and mold issues during high humidity conditions. I hope you all are having as much fun as I am. Best of luck gromies. Check out my black cherry gelato grow. Just posted my outdoor light dep grow - side by side with my indoor grow- same clone batch. This should be a great comparison of indoor versus outdoor grows side by side 👍

Super busy with a move and a big garden reno. Sorry, this is the only update for this week

Its week 10 ....6 week of flower first grow and its orgainic...looking good smelling good ...cant wait to smoke it....

BIG OL BUSH Day 85 - Fish Hydrolysate Feeding (2-4-0)

Que tal, voy a hacer este cultivo 100% orgánico, espero que todo salga bien

Is growing the buds now exciting times

Week 4 – Vegetation | Cuts & Mothers Selections are made. 4x Star Pebbles × Orange Zkittlez, 1x Rainbow Zoap (LIT Farms), and 1x Blue Zlime earned their spot in the next run and went into 10L pots today. One cut from each remaining line gets promoted to new mother status, carrying the genetics forward. Sitting at 20cm, lamp distance 110cm, light schedule 20h. Feeding CANNA Aqua Vega at 1 ml/l, Canna CalMag Agent at 0.8 ml/l, and Aptus Regulator at 0.1 ml/l. pH locked at 6.2, EC at 1.5 mS/cm. Temps holding at 26°C day, 23°C night, humidity at 60%. Smell is just starting to show — weak for now, but it's there. Next run stays in the tent for another four weeks before moving into the flower environment, with multiple topping sessions along the way to shape the structure early. Mothers get the identical treatment over the same stretch. Updates every Sunday. Stay tuned. 🌿

Very happy I went Original Sensible Seeds beens this grow. 🤩 All 3 autos from some special american line, and o boy , they don't disappoint.🔥 Bangers genetics 👏🏻 all trees are good size with super thick stalks and loads of fat buds. All frosty with great smell. I like it a lot 💚

0 cambios, ya que las fotos de la semana pasada en el seguimiento, fueron a 2 dias antes de la 8va semana, por temas de trabajo tarde en sacar y subir fotos, lo.siento amores mios ♥️♥️♥️♥️♥️♥️♥️♥️ pazzzz y atentos a más fotitos durante el engorde

It’s hard to believe this amnesia haze is only in week two of flower! She is kicking butt and LOVING the HLG 550v2 as are her neighbors. I got a little stretch out of her but it appears that’s about it. The colas look like they’ll be about 8-10”. I moved the light down for a day and gave them 85,000 lux and while they are still reaching I don’t think they liked it as much as 65k so I brought it back up. I did take a few of her pie plate sized leaves of just to let a little extra light to the lower sites as well. Thanks for looking and happy growing!

two plants from a single seed😦😯😎

Week 8, looking great. Really putting on some size now, soon to introduce some plant bends. Stay tuned

Following The Grow Boss tips on YouTube "...yield is based on light, quality is based on growers talent" "...number one problem is, too much light, too much water, too many nutrients" Nutrients : (after having issues with nut burns, I decided to use Grow Boss's perfect ppm calculator) Invasion T (Glomus intraradices BEG72 and TRICHODERMA atrovide MUCL45632) 1g / plant Monster X mycorhizes (500 000 propaguls / Kg , made in vitro) 2g / 20cl then complete to make 1l Humic Fulvic Booster (humic and fulvic acids) 1ml / 1l Cannazym 2.5ml / 1l Rhizoponics 0.4ml/1l Lights: 2 x Adjust-A-Wings Avenger 600w HPS Lumatek 90000 Lumens 1000PAR 600w HPS Philips Son-t Green Power 95000 Lumens Soil:Platinium Royal Mix premium quality What is vapor pressure deficit? Often, marijuana growers who have their plants in indoor grow tents or rooms with artificial lighting, take into account parameters such as temperature and relative humidity to maximize plants growth and bloom, thus obtaining abundant harvest with top quality flowers. As we will see later, these factors affect different processes of the plant, such as transpiration or nutrient uptake. However, we usually forget about another important factor that is related to the aforementioned ones: vapor pressure deficit or VPD. Broadly speaking, VPD is the difference between the amount of water vapor that the atmosphere is able to retain (which depends on temperature) and the amount of water vapor contained in it (relative humidity). It is usually measured in kilopascals (kPa). Providing our plants with a correct relationship between temperature and relative moisture will keep us on the right VPD parameters, increasing the plant’s activity and thus improving its growth and showing its full potential during the flowering phase. The ideal would be to adjust both parameters (temperature and humidity) to get the best possible VPD value, so that the development of plants will be amazing.In the chart above you can see the right temperature and moisture values to maximize the development of cannabis plants. The green zone shows you optimal values of VPD, in which it would be ideal to maintain the environment. The orange zone shows correct values, in which plants should not have problems to develop normally. However, red areas show values in which your plants will be very far from hit their full potential, since the relation between temperature and moisture is not optimal. With relatively high values of VPD (between 5 and 12) plants tend to open their stomata and release a considerable amount of water vapor into the environment (increasing their transpiration). This increase in transpiration results in an increase in the plant’s photosynthetic activity, which will need more nutrients and will improve its overall growth, both during growth and bloom. The best range is between 7.5 and 10.5, which we have marked in green. However, we must be careful that VPD is not too high (dark red zone) since the plant would close its stomata to avoid releasing too much water vapor to the environment, which would result in fast dehydration due to excessive transpiration. On the other hand, if VPD is too low (light red zone), the plant will also close its stomata for not releasing more water into the atmosphere, which in this case would be already saturated (it would have reached the maximum water retention capacity in a specific temperature). In this way, reducing transpiration will also reduce photosynthesis, which has a direct impact on the plant’s development and yield. That way, VPD is essential when it comes to offer the best conditions for the development of plants, also to understand its water requirements according to the nutrients used and thus adjust them correctly to meet the grower’s expectations. N/B: SAY NO TO DRUGS -[Day 90] The plants are getting massive, not a lot of space left in the room, each pictures are token back against the wall or on top of a chair. The Super Skunk shall be ready first , the trichomes are visible without using a microscope, the scent is like an amazing candy floss coated with Skunk pee 😅Boerejongens quality @Home 😊 -[Day 93] Switching Buld Lumatek 90000 Lumens 1000PAR to SuperPlant Super Red 85000 Lumens 2000K 1498nm Lightening under the 1500nm wavelength (2000K) just between the NIR and the Microwave length, can't stand in the room too long without getting tears and shining eyes. Buds shall start to blowup like pineapples, increasing yield. -[Day 98] Everything is getting frosty. Starting to decrease RH . -[Day 103] Today the Y Griega started to push on her terpenes, believe it or not that plant smell stronger than the 6 giants Skunks (the Skunk strain is already a very strong smelling plant), she smell like a coffeeshop front door, the fragrance is absolutely amazing and fantastic, I will definitely grow a full crop of that strain ! -[Day 105] 42 days of Blooming folks ! It's getting serious now 😄 If it can helps you to realize, each plants gots 4 side and a middle, each sides gots 4-6 buds and there's 5-6 buds in the middle, there's 11 plants of 1,60m/5.25ft, how many buds does it makes ?? The correct answer will win 1 like 😅😂😅😂 -[Day 106] WEEK 7 of flowering, the end is close my friends, I'm trying to give you the best shots as possible, I wish I'd could share a good smoke from this crop with you guys ....😉

I just noticed today I’m having some top leaves yellowing between the veins. My ph is on point so I don’t think it’s a deficiency. I haven’t changed anything except the Carboload. So I think I’m going to dump my tank and flush. I really cannot imagine its the Carboload either. So I’m a bit perplexed. I decided after digging into The scrog and finding some lower yellow leaves it was a nitrogen deficiency. Upped the A&B

Hello Growmies Hope you are doing well and everything is growing in the garden. I needed a social media detox. Was only busy posting which my ladies suffered from. So I only concentrated on my lady. But now I miss you all and I'm looking forward to admiring your grows again 💚 the Icc is almost finished, I'm very happy and I'm looking forward to telling you how delicious it is. Thank you very much 😁✌️💚

Day 15 ready for the transplant tomorrow. Just watered each with 1/3 cup of water. It was the first watering since the initial one 15 days ago. My basement is very humid. All 4 are growing pretty strong. The 2 on the left and right are the Guavo Autos and the other 2 are Sticky Soul Photos. They will continue their life outside starting tomorrow. Day 16 and all 4 plants have been transplanted into their final 3 gallon pots. What I did was water each cup yesterday with 1/3 cup of water. Today I drilled some holes in the 3 gallon pots. I filled it with a small amount of build a soil light mix and the rest with happy frog. I poured 2 cups of water into the new soil. I made a hole. I added 2tbspns of Mykos to each pot. I slid the plants out of the cups into the hole. I watered those in with 3 cups of water each. A little ran off through the bottom. I’m going to keep them in the shade for a few days then toss them in the sun. Stay tuned! Day 20 and we are looking really good. Check the video above.

BEAUTIFUL!!! I Think the issue was CAL def like i was thinking but I'll give it a few more days before i can confirm the problem is fixed. the scrog is looking really really nice!!! learned alot from my previous mistakes. keeping the temps down and not doing the co2 early the plants are nice and low and more compact. The Co2 has been started as well!

So as I'm not home this week i will just update what i did on my last day home. I added another reservoir, put a pump in it and a fill hose up into my main reservoir (which is 4 feet off the floor to gravity feed my blumat system). Installed a JB and wired in my pump and 2 level switches. They are wired in series with the switches in the normally closed position so the water level will break or make the circuit. Switch 1 is in the main reservoir to call for water and switch 2 is in my spill tray to stop a potential runaway from happening. After getting everything filled to the levels i wanted i did a test run and it worked great. Unfortunately i didn't look closely enough at the specs on the switches and #1 burnt out because it's meant for dc power not ac. My bad , so i hooked up a timer set it for 2 minutes a day as i didn't have time to fix it. I decided that it was a good time to flip over to flower and I'm going with 13/11 lighting schedule see if there's any difference. Happy growing

Started off week 6 off by adding 5ml of Flying Skull Z7 to reservoir and adjusted reservoir PH to 6.0. I've got the blumats nearly dialed in and keep making small adjustments every 24 hours. I am holding off a few days on the nutrients to see what the plant tells me. The clawing seems to have improved(combo of over watering and not getting runoff on hand watered nutrients I believe). When I apply nutrients going forward I will make sure there is plenty of runoff so I don't repeat the same mistakes. 😬 on day 2 I applied 1 gal of nutrients and watered until runoff. On day 3 I defoliated the bottom of my plants to improve the air flow. On day 6 I added 5ml of flying skull Z7 to the reservoir. I noticed a possible calcium deficiency on one plant so on day 7 I applied my 1 gal of nutrients with the addition of calmag and silica. Ive only used calmag once growing in coco and it burned my plants...so I assumed there was enough from my tap water and nutrients. I know this goes against all advice.. I think it finally caught up with me LOL.LIve and learn to buffer your coco. Next grow I will buy buffered coco and use a calmag product 😅 I defoliated the center of my plants to increase airflow and expose light deeper into the canopy.

It was a good, busy week. The clones are down, dry, and now jarred. Total weight from them was 5oz. I didn't think I was going to get more than 2oz because I didn't put much effort into them. However they all turned out pretty solid for growing led and soil 😎 The mothers come down in 9 days and I'm definitely looking forward to seeing how dense those will be! I'm pretty sure a certain someone is going to be donating to some polar bears 😏 because I'm damn sure getting more than 2.5oz per plant 😎 That's about it for now, happy growing everyone ✌️🍀✌️