The Grow Awards 2026 🏆
Likes
Comments
Share
We zitten in week 11. Ze wordt steeds mooier en mooier. Ze ruikt zeer sterk zoet en heeft harde toppen bedekt met thc. Ik heb wat meer bladeren weggeknipt Ik zal haar deze week proberen nog meer op te pompen en waarschijnlijk vanaf volgende week alleen maar mineraalwater geven. ( denk ik) Laten we kijken hoe ze zich deze week ontwikkeld. Gedurende de week zal ik nog verse foto's updaten dus hou het in de gaten 🧐
Likes
5
Share
@Mateo513
Follow
well i had to take the plant and harvest a week early because the stress I caused on splitting the main trunk cause the leaves to fall off...lucky it has milky trichomes under the microscope!😀 the smell is real sweet and musky to me right now before cut down, the flowers are really dense so it has weight to even the smaller buds! i'll be back after drying to put up my harvest results a few pics and vids with my final review of kabul auto👍👍👍 oh i wanted to add the fact that the genetics seem very good to handle me almost breaking the plant in half and still producing😁
Likes
25
Share
@AsNoriu
Follow
Weather is sh!t ... they are not maturing at all ... hopefully inside girl will finish in 2-3 weeks and ill bump those in for last week or so, maybe it will help a bit, till then its only air and leaf .... BUT they smell so sweet and so berry ... inside not even close to that ... Girls don't drink, its too humid i guess and cold... Still gave like 2liters of 6.5 ph water, to moisture top lair. Its my first summer when i don't cover greenhouse from 8pm to 8 am. I started usually on August 1. Last year my landlord found like 30 "tomatoes" in greenhouse, can't do that trick anymore ... So its first greenhouse when i have anything else except cannabis ;))) That way just don't work or brings pity results ... Only autos in UK summers ... Will upload inside girl. Its beginning of week 6 for them by my accounts. I take my words back, she STINKS !!! Or smells ;))))) Strong, really berry and sweet. Girl is packing up and almost recovered from light shock, now those who stayed outside looks 2-3 weeks behind ... Happy Growing !
Processing
Likes
13
Share
@neuraxis
Follow
Started from seed this lady's have 17 days under half load 4 X 50W Cree CXB3590 CRI 80 3000K custom build led. 7days in rockwool cube under a dome , 10 days in 750ml pot. Freshly transplanted into to final pot. They have received 250ml of fertilizer solution and transplation soil was moisted with 6.5PH water. Led now running on full load. This project have some custom/extra gadget, a prototype growing controler. Hardware Specs: Raspberry PI 4 4Go Ram + SSD 120Go Phat sparkfun qwiic i2c hub + i2c sensor for : temperature,humidity, co2, tvoc, air pressure and distance measurement(plant height) Linked with one custom wifi power bar for schedule and countdown. One sonoff pw r2 for energy monitoring. Both using ESP8266 chip and running on Tasmota alternative firmware. Linked to the controler using normal wifi AP. From Wall|----Sonoff-----Powerbar---: Led, Extraction Fan, Mouvement Fan, and the Rpi4 Software: Exploitation System: Custom Linux Buster Lite OpenHab : Open source domotic software for visualition and automation. Mosquito MQTT +TLS server : Used to publish and receive message/data from sensor etc. InfluxDB : DataBase for data retention Chronograph: Visualisation and transformation panel to analyse our data. Custom python code for running the sensor and publishing result into mqtt channel Chronograph have monitoring panel for now The growroom Sensor AkA spaceship The system sensor and hardware/computer monitoring : Memory, Disk space, CPU load and temperature. In/Out etc. Network etc The database: request per db ,memory heap, disk usage, http request etc. Working : Co2, humidty,temperature, Tvoc, Current,Voltage, Power, Daily/yesterday/Total energy consumption on kWh and $ Planned in version 1.0 : Mesuring plants height using ultrsonic sensor. Adding remote On/Off function on sensor using openhab. Adding power schedule in openhab. Adding basic automatic watering/dosing system, Planned In version 2: Adding relay and dimmer on the custom led to control/dim each cob. Adding custom small emerson effect led based on 3W led. Adding , automatic, PH, PPM and temperature monitoring for water/fertilizer. Adding PAR sensor for light monitoring. Adding soil moisture and PH sensor. ============================================ 2020-05-07 ============================================ Added security cam for streaming with rtsp, working on http conversion for addition in openhab Added snapshot. CO2 sensor down, some resoldering needed. =============================== ================================= 2020-05-08 =============================== Good: Updating fertilizer quantity from 250ml/day to 500ml. Watering planned for the end of the day. 2 days ago i've pinched the head of each plant Internode are booming. Started LST training s to help the lower internode. Bad: Noted some physiological/Nonparasitic leaf Roll on one plant ; humidify level is too low; Humidificator filter is broken, need to be replaced. Monitoring #4 for couples of days.
Likes
12
Share
Start April 4th. Day 1 vega. Hey! Four seeds have hatched. One is smaller than the others. I planted the seeds in GroBag spilled with clean water ph 6. I'll be back with more information Day 2 I made a video, it shows that the seeds have taken root well. Leave your comments. I'll be glad to chat.
Likes
15
Share
Fully into flush this week just running 0.6 tsp per gallon(3g/gal) of the FullTilt from FloraFlex. Next week I'll be running plain water ph'd to 6.3-6.5 for the last week of flush. That being said, Plant #1 is developing quickly though she may need an extra week or two to finish out. If she does I will probably pull her out of the autopot system and put her directly in the middle to finish out while my next run is starting in the system. Been an exciting grow watching this cotton candy do her thing, cannot wait to see what the final week has in store! Have also narrowed down my deficiency that began last week down to possibly cal/mag deficiency. Will correct this is the feeding schedule next run.
Likes
6
Share
Finally we are done, I spent one 10 months on Durban Poison, this is my best sativa strain and im absolutely in love. So next report will be with some Clones of Durban Poison.
Likes
12
Share
@CANNASIM
Follow
WEEK 1 of flower. This is insanely quick, veg for three weeks and on week 4 we are flowering strong. It is raining a lot, so i had to use a top dressing, ingredients on the week 3, to manage the soil nutrients till the end of the cycle. About two table spoons. Watering once a week, this girl is in a supersoil, very natural as a grow, nothing much complicated, no science fiction with fertilizer or chemistry. I’m curious about the yield, and how much can i pull out of this way, with minimal work and a nearly inert soil. Let’s see how this experiment turns out.
Likes
7
Share
Amber trichichomes have started appearing. Moved them to a smaller box for the last few days as it's a bit cooler.
Likes
10
Share
This was a big plant and considering I brought this back in from the outside hard big buds
Likes
46
Share
This is a must grow strain for anyone that likes a good balanced strong sativa , it grew well despite dripper and timer issues and had a really good medicinal side for crohns disease whilst leaving me energised and uplifted . This plant continues to stretch right until harvest even with heavy defoliating it ended up 150cm tall. The smell is really strong and differs between pheno types. One grew with almost no pistils/stigmas and was very frosty, this one could have continued Even after 9 weeks flowering . Overall this has taken over as my favourite sativa ! I WILL grow this again for sure and would recommend it to anyone who likes sativa or citrus smelling/tasting flower 💚 NB: I didn't weigh the bud wet so ignore the guess in the grow report.
Likes
26
Share
Pheno 1: strong natural tart cherries with a slight candy Pheno 2: loud cherry candy Pheno 3: cherry fun dip Pheno 4: cherries mashed with earthiness Pheno 5: the strongest cherry pheno I’ve ever smelt. Just loud cherries in your face. I kept pheno 3 and 5. I pressed both into rosin and the terps were insane it smelt like I worked a double at the marischino cherry factory. The terps on 3 were cherries on the inhale with a candy fun dip exhale (absolutely up my alley). Pheno 5 was the most in your face cherry I’ve ever tasted. It was straight cherries throughout the inhale exhale with a slight tart/candy on the back end. I have found my cherry phenos for my future business. Thank you for riding this journey with me. Harvest results on my YouTube channel link in my bio!
Likes
17
Share
@Eddjack
Follow
Ci siamo ha fatto vedere i sui primi Peletti . Ho dato una bella pulita alla chioma , togliendo parecchie foglie e ramificazioni inutili, spero respiri meglio e si sviluppi meglio .
Likes
25
Share
This week I had almost no time at all due to family commitments - I'm also completely at a loss as to what deficiency my plants are suffering from. I would say a serious calcium magnesium deficiency. But why? I mixed every watering with calmag - I suspect that the pH value in the soil was not right at times. The deficiency came overnight with the second compost tea. Oh well - I hope I can still salvage something. I would be very grateful for help. Thank you 🙏
Likes
Comments
Share
Week one after germination and these girls are growing about how I would expect. Not much to report on in the early weeks but we have started the alfalfa Ferment so they will definitely be taking off! They still have another week or two before we start the Athena blended but I'm pretty excited to see how well the Athena does....and these seeds of course. Some of them have some wacky looking growth but I'm sure they'll grow out of it. That's it for now, thanks for stopping by.
Likes
15
Share
@Waveform
Follow
Not much to say about this real first grow week’s start. Everything looks ok, steady growth at 40% light. I had to restart the control app a few times, therefore the broken graphs. At night times, the control software tries to attain optimum humidity rather than optimum VPD. That’s why VPD is dropping when the lights are out. CO2 is back to baseline – really wonder what the reliable values are … I found I have to silence the blowers when a timelapse photo is being taken. The shaking you see at the beginning of the grow video should not appear, or to a much less degree, in the future. Day 13 (July 30th) shows good, steady growth. Leaves are a bit spotty, although less then the processed images show. Something to be worried about? I would not currently … All are developing their 3rd nodes now. The controlling Raspberry Pi crashed last night when I tried to access it remotely … ;( – looks like the Connect software is in need of an update. The leaf temperature sensor is now really aimed at lady-to-be nr. 1’s leaves. Nothing to change that I see. I won’t cut the top yet, just watered the outer circle of the big pots slightly to encourage root growth. Day 14: Nice growth. First plant is now at 11 cm, and at 12 cm on day 15. Nothing special to report so far, except for I had to move the internal camera a bit upwards to keep little lady #1 in focus. Day 16 and last day of this week (Aug 2nd): The young ladies are now at about 14 cm tall. Growth looks very compact though. I think the two inside girls will lose their heads next week; I’d still prefer to have one or two more nodes available. Pictures of this day are taken at the end of the plants’ day. Notice their leaves are pointing upwards, which should be a sign that they want more light. I turned the lights up by another 20% for a total of 60 W now. Weather was pretty hot the last days so it wasn’t possible to stay in optimum VPD range but as long as growth is this satisfying I don’t mind. I will water them slightly at their next day start. Outside plant’s soil humidity might still be at around 58% officially, but drying starts at around 40% with this measurement and the sensors are placed quite closely to the stems so outer soil is dryer. I am preparing the plant water with some additions and a frequency imprint suing some Solfeggio and Schumann frequencies.
Likes
4
Share
Sorry I have been slacking on this diary, the plants look great. The 3WOK OG is nice and big with plenty of bud sights
Likes
50
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 5/21/22 😽💨 Wow..we're totally impressed by 420FastBuds, even my husband is blown away and he typically wants nothing to do with autos inside...not even 3 weeks in and their main stems are as fat as drinking straws..we just started them on some light nutrients today...I think these will get bigger than I imagined, I'm really glad i decide to use 5gal pots..we settled on low stress training for all the 420FastBud strains however, we did top one just to compare results...this is our very first grow by 420 and it's been an amazing first impression! Im so excited to see how these girls are going to turn out!! We'll definitely update midweek if anything exciting happens, thanks for dropping by and happy harvests everyone!! ❤️💡🌱 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_