The Grow Awards 2026 ๐Ÿ†
Likes
5
Share
Hi guys!! We've come to the 7th week after a long way, the plant has developed wonderful flowrs very sticky and stinky as well as dense buds all over however has a little different smell from her sister, this pheno smells definitely more lemony and gassy but not so sweet as Hard diesel pheno #2 which you can check here on my page, let's see how this lady performs, I'm very excited to see the final result! โค๏ธ๐Ÿ’š๐Ÿค—
Likes
223
Share
So the story continues... this grow is really an experiment for me to train one plant within my 4'x2' grow space to ScrOG vertically and use the SP250 light on its side. For the majority of the vegetative stage the light will be hung normally above the plant until a week prior to flipping the light schedule and initiating flowering. The plant passed its seedling stage and has been vigorously growing albeit showing strong signs of over-watering and calcium deficiencies. It's really a transpiration issue which I have not solved yet. Increased distance to light as the plant may be growing too fast for its root mass. From feedback at Coco for Cannabis (CFC), it is a Cal deficiency and a young plant getting used to the grow in coco - quite common and not a sign of over-watering. Measuring run-off EC at each fertigation event as I increase the feed EC to monitor what the plant is doing/feeding. Fertigation is now maintained at twice a day (at lights on and 4hrs prior to lights off period) to maintain the target EC. Light period is during the night time to better maintain heat/humidity conditions during light off period (which happens during daytime). ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The grow setup includes ; - Secret Jardin DS120W tent (120cm x 60cm x 180cm) placed inside the bedroom - Mars Hydro SP250 LED light - extraction fan - AC Infinity Cloudline T6 (gives me great control over the environment) - ventilation fans - aquarium heater for nutrients solution (for winter use only) - small oil heater (for winter use only) - small dehumidifier - 20L Airpots (as final pots) and 3.5L general plastic pots (for seedling stage) - Canna Coco substrate mixed with 40% perlite - GHE Flora Trio as base nutrients and various additives - pH and EC/TDS meters - 2x Govee Thermo/Hygro meters (one at canopy, the other at the roots level - these allow for external monitoring and recording) ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Some strain info from Royal Queen Seeds ; An amazing mix of genetics background - Its true genetics are unknown. Some say OG Kush is a mix of ChemDawg with a Lemon Thai and Pakistani Kush. Others say that itโ€™s just a special cutting of ChemDawg from the early 90s. The most obvious trait of OG Kush is its strong, unique, very dank, slightly citrus aroma, almost like fuel or strong detergent. The flavour of OG Kush is equally as strong and dank, with a long-lasting aftertaste. Strong mental and physical high - OG Kush is an extremely strong cannabis strain, with most experienced smokers listing it as one of their favourites. The effect is as strong physically as it is mentally. Though its effect is like an Sativa, the strain's genetics are mostly Indica. The effect is as strong and complex as the flavour. OG Kush takes around 8 weeks to flower and on average the yield is 500 grams per plant. Big buds with lovely tones - OG Kush is known to stretch slightly during growth but soon starts to fill out during flowering. Generally, it will reach a height of 90 to 160 cm. Its buds are large and dense, lime green clusters covered with a large amount of resin.
Likes
17
Share
Likes
48
Share
i accidently bought some unbuffered coco and mixed it with my ussual earth, had major calmag problems in mid-flower but iยดm still pleased with the results...also had a little trouble with mold at the end due to bad weather and high humidity in the final weeks of the grow, had to remove a few buds and harvest early @ day 55 of flower....but there's still alot of great looking buds left for me to enjoy and all look mostly done... Just harvested and hung them upside down, currently drying them at constant 19.5-20.5ยฐC and 50-60% RH..will update as soon as they are dry
Likes
34
Share
@Haoss
Follow
A new plant was born, thanks to the seeds of Zamnesia, I hope the best girl will grow up
Likes
4
Share
60x60 cm tent in a 1920's peek-in-closet Oversized vent for silence High power DIY LED True SoG 12/12 from seed with 15 plants in 2L pots Watering all plants in bottom tray with 30% of total pot size (10L) WEEK 1 DAY 1 - Germinated in paper towel DAY 3 - Planted into pots + Lights ON at 125w DAY 5 - All plants have broken soil DAY 7 - Slight stretch - Light at 185w WEEK 2 Two of the Iced Out are lagging behind, others are on point - I'm trying to push light and nutes to the max. Extraction fan (AC infinity Cloudline T6) on level 2. DAY 13 - First full watering (10L) with 20 ml Canna Terra Vega DAY 14 - Circulation fan turned on (low) during lights on WEEK 3 Good growth, two Iced Out still lagging DAY 18 - Light at 225w, Extraction fan on level 3 during lights on DAY 20 - 2nd watering, 8L with 30ml Vega + Light at 250w DAY 21 - On point, mostly :) Could've pushed nutes a bit more from the go WEEK 4 DAY 24 - So far this week I'm just kicking back and watching them do their thing. The two lagging Iced Outs are trying to catch up. DAY 26 - Watering 10L with 50 ml Vega (one day too late...) + light on 300w (max) DAY 28 - 4 weeks from popping the seeds, looking good except for the two Iced Outs, one of them is trying to get with the program, the other... Well, some plants are just pricks. WEEK 5 I think this is the week we'll see them take off :) DAY 29 - Plants are starting to show sex, removed 2 Urkle Mints males, the other two are females, the rest are fems so we're down to 13 female plants total with only a single weakling DAY 29 - Watering 8L with 50ml Vega (shouldn't have been later than today!) DAY 33 - plants exploded over the last 4 days and most are stretching and starting to flower DAY 33 - Watering 10L with 60ml Vega (feeding Vega once or twice more then we switch to Flora) DAY 35 - Just cruisin' ๐Ÿ˜Ž WEEK 6 Lots of stretch the past week, flowers are setting in, the laggy Iced Out was culled, 3 plants are a bit behind the others.. DAY 36 - Watering 10L with 50ml Vega DAY 39 - Watering 10L with 50ml Vega DAY 42 - Defoliation WEEK 7 DAY 44 - Watering 10L with 50ml Vega DAY 47 - Switching to flowering nutes - Watering 10L with 50ml Flores WEEK 8 HAa to break the stem on the stretchy Sugar Cane to keep it low enough DAY 51 - Watering 10L with 60ml Flores DAY 54 - Watering 10L with 60ml Flores
Likes
35
Share
@Rap_a_cap
Follow
This is exactly the ๐Ÿ‡ฒ๐Ÿ‡ฆ morroccan ๐Ÿ‡ฒ๐Ÿ‡ฆ way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from ๐Ÿ‡ฆ๐Ÿ‡ซ Afghanistan ๐Ÿ‡ฆ๐Ÿ‡ซ or ๐Ÿ‡ณ๐Ÿ‡ตNepalese ๐Ÿ‡ณ๐Ÿ‡ต Mountains to ๐Ÿ‡ฒ๐Ÿ‡ฆ Morocc ๐Ÿ‡ฒ๐Ÿ‡ฆ Rif passing through Bekaa valley in ๐Ÿ‡ฑ๐Ÿ‡งLebanon ๐Ÿ‡ฑ๐Ÿ‡ง. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice andย  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or potย  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......
Likes
25
Share
t's really huge to be an autoflowering I put the photo of the base to show the ramifications as they start ... the scent is not very strong but it is pleasantly fruity just pass the hand near a top to smell it
Likes
7
Share
The strain is not the biggest yielder but its quite promissimg,the smell is top and the effects are a very mellow creative smoke,tastes like sweets,will grow it again โœŒ๏ธโœŒ๏ธ
Likes
11
Share
@BLAZED
Follow
Week 8 (17-3 to 23-3) 17-3 Temps: 17.4 to 21.9 degrees Humidity: 60% to 72% 18-3 Temps: 17.5 to 22.2 degrees Humidity: 54% to 65% 19-3 Temps: 17.9 to 22.4 degrees Humidity: 52% to 61% Watering: Both 500 ml. EC: 0.4 Watering: Both 1000 ml. EC: 1.4 Defoliated both plants and attached some shoots to the rack. 20-3 Temps: 18.2 to 22.8 degrees Humidity: 59% to 69% 21-3 Temps: 18.5 to 23.4 degrees Humidity: 57% to 67% Watering: Both 1000 ml. 22-3 Temps: 19.4 to 24.1 degrees Humidity: 55% to 67% Watering: Both 1000 ml. Set the strength of the light to 50% 23-3 Temps: 19.8 to 24.8 degrees Humidity: 58% to 67% Watering: Both 1000 ml. As you can see, instead of removing the leaves, i tucked down all the leaves to open up the canopy. I will see if i like this method as its the first time i try this. I also attached some more shoots to the rack, its looking nicely spread out now :)
Likes
6
Share
8th week, almost 9. Last week I gave them some nutes and looks like they like it. Looking healthy to me. Flowers getting some weight on them. Looking forward for some tasty buds. :)
Likes
14
Share
@Docteur_8
Follow
4th week of flowering is beginning today Iโ€™m very happy with these, began to add K to the feeding so they can grow big buds I hope ๐Ÿคž๐Ÿผ Light smell increase, gassy/resin notes + piny and lemony too โ›ฝ๏ธ๐ŸŒฒ๐Ÿ‹
Likes
54
Share
@valiotoro
Follow
Once again GALACTIC buds! And once again cant add the comment lol
Likes
25
Share
@m0use
Follow
Ok next week is just water and the chop. I am done with these plants, they did well and I'm happy with that. Got some real fade and issues all through out the run of this grow but the buds on the plant are looking fantastic. Can't say I am disappointed in them as I legit did not give a fuck about them and they produced. so that's a massive bonus. I will be drying them indoors for the same period as the other plants I was harvesting. give them a little cure and see what they are like.
Processing
Likes
1
Share
everything changed on week 4 grow tent and cob led came to show how a good light is important. from now til last 2 weeks, only indoor growing goodbye CFL's, you worked well. + LST and ferts (2ml + 0.25) Defoliation started Removed branches from 1st node
Likes
9
Share
๐Ÿ˜ณ๐Ÿ˜ช๐Ÿ˜ฐ๐Ÿคฆโ€โ™‚๏ธ๐Ÿฟ๐Ÿคฆโ€โ™‚๏ธ๐Ÿฟ
Likes
3
Share
5. Woche Hab sie letzte Woche nomma getoppt und jetzt darf sie sich erstmal bisschen erholen. Update von Tag 40: Topping nr. 4 ist durch und jetzt darf sie sich erstmal erholen ๐Ÿ˜Š