Processing
Likes
Comments
Share
This is a strain that is very easy to grow and resistant, after the fourth week it sticks a lug, and does not need a lot of vitamins, it grew with only 13 and 12 hours of light and went through cloudy days and a lot of humidity
Likes
70
Share
@Roberts
Follow
Big Fat Wedding Cake is growing great under the Spider Farmer G5000/UVR40 lights. She is starting to stack now. She has been very hungry. Everything is looking good at tye moment. Thank you Spider Farmer, Athena, and DutchFem Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer Official Website Links: US&Worldwide: https://www.spider-farmer.com CA: https://spiderfarmer.ca UK: https://spiderfarmer.co.uk EU: https://spiderfarmer.eu AU: https://spiderfarmer.com.au G5000 Light Amazon Link: amzn.to/4643esa UVR 40: https://www.amazon.com/dp/B0BR7SGTHS Discount code: saveurcash (Stackable)
Likes
4
Share
Week 7 (4/04/22 - 4/10/22)
Processing
Likes
12
Share
Checkout my Instagram @smallbudz to see the Small budget grow setup for indoor use, low watt, low heat, low noise, step by step. 04/01/2020 - Did the last defoliation, removed about 1/4 of plant material. 06/01/2020 - Fed her 1.5l of 6.5PH water with 0,3ml Cal Mag (Atami) 0,25ml of Grow, 0,6ml of Bloom and 0,5ml Max, and 1ml of each: Heaven, Alga-mic and Vera, noticed some run off, I use about 1/3 of the nutrient dosage on the chart, to achieve about 200/300PPM (500 scale).
Likes
1
Share
@Cannerd
Follow
I'll be updating the comment with the daily log shortly, but figured I'd get the photos and weekly overview up. I started off this week with a topping at about the 4th node, leaving the larger fan leaves on for now. I then left then alone for a bit while I waited for the new branches at the nodes to grow out, rotating as needed. By the end of the week, they had all bushed back up with new foliage and growth. I also included photos pf the flowering mother plant to keep up with that sneak peak. She still wasn't showing signs of flowering, so I gave her an extra 24 hours of darkness to hopefully kick start the process. As I went to go shut unplug the light source, I noticed that there was a smaller light leak from one of the vent ports, so I also made sure to close that up. At the end of the week when she started to show signs of flowering, I defoliated her to help with light penetration, as she's got massive fan leaves. You'll see in the photos that I took that opportunity to decarb the trim as well. I'm sure there's little to no THC-A, but whatever other compounds are present should make for a nice addition to some butter later on down the road. I just won't factor it in when approximating the potency of the final product.
Processing
Likes
6
Share
@NastyNug
Follow
End of week 6. PM sprayed Azamaz 2tbs per gal
Likes
6
Share
week 3, the whole family is here 3-gal: Runtz from un-feminized seed - showing female! 3 - gal: Grape Stomper from un-feminized bagseed - showing female! 1 gals: two are black ice gelato from un-feminized bagseed - hoping female! remaining are all fem from SeedSupreme 5 gorilla zkittlez 2 amnesia haze 1 bubblegum last two photos show our 720W Ion LED from Grow Gen that came in yesterday! Note that if you purchase this beasty light you should get S-HOOKS from Amazon or wherever for the tallest hanging option. We are on our way. my 10ml dosing syringes just came in as well as my pH calibration kit. I am running a hybrid philosophy when it comes to Medium and feeding. 70/30 Coco/perlite with the following added in for a "living coco" environment: worm castings, bat guano, kelp meal, alfalfa meal, mycorrizhae, and then I'm giving keyword LOWDOSE GENERAL HYDROPONICS FloraGro,FloraMicro,FloraBloom to supplement any nutrients the amended coco can't or isn't providing. Anyone with experience with this?
Likes
31
Share
@THCpapa
Follow
Week 13 in the garden, and it's been a week of contemplation and admiration. Despite my initial plan to flip the plants, I decided to give them another week in vegetation. It's like I'm sculpting a masterpiece, carefully grooming the plants into a perfect botanical sculpture. Working with my plants feels like art – it requires skill, love, dedication, and a sense of playing God. As I look at the tent, I can't help but feel a sense of pride and joy. These green beauties are turning out amazing, and I'm filled with overwhelming happiness whenever I get the chance to speak to people about them and show them off. But the time has come to take the next step in their journey. They're being flipped this week for sure, ready to embark on the next chapter of their growth. It's bittersweet, but I know it's all part of the magical process of growing these wonderful plants. Here's to Week 13 – a week of artistry, joy, and the promise of new beginnings. 🌿🎨
Likes
5
Share
Start of week 3. Week 2 went well, this girl is developing nice bud sites, albeit slower than the OG Kush plant is. The. Blueberry is not as nutrient hungry as the OG Kush, she's not as dry/light weight come feed time, but she too is recovering from nutrient deficiencies.
Likes
16
Share
@Canadian
Follow
This girl flowers and branches are very heavy Despite not being sugar coated Flowers She is still in development and will become much more heavy . I think that we are looking at probably three more weeks of development to start to check on flower Maturity maybe more but despite being treated Brutally she is a survivor with so much Height she is ideal for our Canadian outside summer. Thank you for reading I continue to update have a happy grow
Likes
9
Share
@DD_420
Follow
Final weeks are here! The up coming week will be her last feeding with nutes. Florakleen will come next followed by ph’d water and possibly a day or two of blackout befor harvesting.
Likes
21
Share
@Lontra
Follow
In week 4 the plant kept growing to a real dense bush so I continued the LST and did some little defoliation every 2-3 days like in week 3. Additionally I started giving some Alg-A-Mic to help the plant handling the high temperatures (up to 35-36°C) inside my box.
Likes
7
Share
@apmcfly76
Follow
Very satisfied and impressed lasted a little bit longer than I expected in vegetation. Enjoying the process and learning
Likes
11
Share
@Roberts
Follow
Super Skunk is doing good. I did move her to my photoperiod room. As I need to flower some plants and she was 3rd closest. Everything is looking good. Thank you Spider Farmer, Athena, Medic Grow, and Spliff Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
120
Share
First and foremost, I want to express my gratitude to Dutch Passion for trusting me with the honor and pleasure of growing their Tropical Tangie. It's an incredible strain, and I can't wait to see what she brings to the table. So, shout out to @DutchPassion_Official and the Grow diaries Platform for making this journey possible! Now, let's talk about the germination process. I followed the typical seed germination method, placing the seed in water. And you won't believe it, within about 30 hours, she sprouted her tiny little taproot. It was like a magical moment, witnessing the start of a new life. After careful consideration, I decided it was time to move her into a small pot filled with Aptus Holland Mycor Mix. This is a special blend that contains beneficial mycorrhizal fungi, which form a symbiotic relationship with the plant roots, enhancing nutrient uptake and overall plant health. It's like giving my Tropical Tangie a team of underground helpers, ready to support her growth. But that's not all! To give her an extra boost, I added Aptus Holland Water Regulator, which helps optimize water absorption and distribution within the plant. And to kickstart her growth, I used the Micordrip from Aptus Holland as well, which provides essential microelements to support healthy development. It's like giving her a tailor-made nutrient cocktail for success. Now, let's talk about the plant guardians, the Ninja Legos! These little guys may seem like toys, but they are the unsung heroes of my garden. Not only do they bring a touch of whimsy and fun, but they are also masters at keeping bugs and bad energies away. They're like the silent protectors of my precious plants, ensuring a safe and harmonious growing environment. Plus, who doesn't love a good joke about Ninja Legos? So, my friends, here we are embarking on the Ninja Lego Tropical Run with Dutch Passion. It's a journey filled with love, passion, and the support of Aptus Holland as my sponsor. Together, we're creating something special. Stay tuned for more updates as we witness the growth and development of the magnificent Tropical Tangie. Thank you, Aptus Holland, for your support, and a big shout out to Dutch Passion for making dreams come true. Let the adventure begin! As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and blessed with you all in my life<3 <3 <3 #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dutchpassion #dogdoctorofficial #legoninjago #growerslove 
 With true love comes happiness <3 <3 <3 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 Friendly reminder all you see here is pure research and for educational purposes only <3 <3 <3 Growers Love To you All <3 <3 <3
Likes
12
Share
Likes
12
Share
@CheeRz
Follow
Flowering week 5 and we are approaching the finish line. Lady Runtz seems to be developing well, the leaves are still very nice and green. I am sure we will be ready in time for 05/31/25.
Likes
92
Share
Week 5 Veg Report: SCROG Netting, Massive Leafs & Precise Data Mastery! 🌱 Girls Growing Stronger Than Ever! 🌱 This week has been truly epic in the grow room—so much so that it’s time to bring in the SCROG net! With the canopy expanding and the younger ones still working to catch up, the SCROG net will help me achieve that perfect, even canopy. A well-placed SCROG not only ensures better light penetration but also gives the smaller plants a chance to spread out and thrive alongside their bigger sisters. Now, let’s dive deep into the SCROG method. The Screen of Green (SCROG) technique is a grower’s secret weapon for maximizing space, light efficiency, and yields. The concept is simple but powerful—train the plants to grow horizontally along the net, forcing them to expose multiple budding sites instead of just a single cola. This way, the canopy spreads evenly, improving light distribution and air circulation throughout the tent. As the plants grow, I’ll gently weave their branches through the screen, ensuring they fill every square inch of space. The end goal? A sea of buds all basking in equal light! 💪 Huge Leafs Everywhere! 🌿 One thing that’s really catching my eye this week is the size of the leaves—they’re HUGE! Honestly, they’re so big I couldn’t resist a little fun, so I made myself some fashion accessories: leaf earrings and a cap from the Super Sativa Seed Club Green Papaya! 😂 And, of course, I captured the moment. But seriously, large leaves at this stage are a great sign of healthy, robust plants. These “solar panels” are hard at work soaking up all the light, driving photosynthesis, and fueling growth. So, what does it mean when your plants are showing off big, luscious leaves? It’s a clear indication that they’re happy, healthy, and thriving in their environment—big leaves mean lots of energy being produced and stored for future bud growth. Exactly what we want! 💧 Precision Feeding with Aptus Nutrients 💧 This week, I took a deep dive into my Aptus nutrient lineup and shared a video explaining how each product affects the water’s pH and TDS. Using the AMP-3 Precision Meter, I’m getting real-time water readings and keeping everything dialed in perfectly. Let’s break it down: • pH: 5.83 • TDS in solution: 445 ppm • Water temperature: 25.2°C The Aptus products are incredible for balancing nutrients without throwing off the pH or TDS too much. I’m fine-tuning my feedings based on these readings to make sure the girls are getting exactly what they need. The precision I’m able to achieve with the AMP-3 is mind-blowing—I get immediate feedback on pH, temperature, and EC, allowing me to make real-time adjustments and ensure the perfect environment for nutrient uptake. 📊 Environmental Mastery Thanks to TrolMaster 📊 Speaking of control—let’s talk about the TrolMaster system! Between the DSH-2U Humidity Station and all the other sensors, I’ve created the perfect environment for my plants. Here’s where we’re at this week: • Temperature: 26.2°C • RH: 70.6% • CO2 levels: 775 ppm • VPD: 1.0 kPa • PPFD: 423 Thanks to TrolMaster, I can monitor and adjust these metrics in real time, and the best part? I can do it all through the TM+ Pro app, even while I’m lounging in my green papaya leaf hat! 😆 Whether I’m checking the CO2 levels, adjusting the lights, or fine-tuning the humidity, it’s all in my hands with just a tap of my phone. Talk about convenience! 🌱 P.S. – Inline Sensors: Heavy-Duty Precision 🌱 Now, let’s talk about the heavy-duty players in this game—the (PCT-2) Heavy Duty Inline EC/Temp Sensor and the (PPH-2) Heavy Duty Inline pH Sensor. These bad boys are connected directly to the AMP-3 Precision Meter, and they’ve been absolutely crucial in giving me the most accurate readings on my water and nutrient solution. The PCT-2 keeps me informed about the electrical conductivity and temperature of my solution, which is key for monitoring how well my plants are absorbing nutrients. Too high or too low, and we’re asking for trouble, but this sensor ensures I’m always in that perfect range. The PPH-2, on the other hand, is all about maintaining the perfect pH balance. A fluctuating pH can mean nutrient lockout or deficiencies, but thanks to this sensor, I get a constant read on my pH levels, so the plants are always in their sweet spot for optimal nutrient absorption. Together, these inline sensors allow me to run a super-tight ship—every drop of water and nutrient is dialed in to perfection, keeping the plants happy and healthy! Shout Outs! As always, huge thanks to TrolMaster and ThinkGrow LED for the amazing gear, to Aptus Holland for their top-notch nutrients and Pro-Mix for the best soil i have used so far. Big love to the seed banks, the amazing Grow Diaries community, and all my followers—you guys make this journey so much more exciting. Don’t forget to catch up on my social media, Instagram, and YouTube for real-time updates and exclusive content! Stay tuned for more—next week is going to be epic! DogDoctorOfficial Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off Growers Love to you all 💚💚💚
Likes
36
Share
@squalino
Follow
​Journal de Culture : Frost 1 (Semaine 4) ​Génétique : Frostbanger (F2 graine Perso) | Système : Autopot 20L ​📣 Remerciements Un immense merci à toutes les personnes qui suivent ce journal depuis le début ! Un merci tout particulier à @Mia_BIOTABS et à @Mrs_Larimar pour leurs précieux conseils et leur accompagnement. Merci à tous pour votre soutien ! ​🛠️ Configuration Technique ​Éclairage : Lumatek ATS 300W Pro (réglé à 75%) ​Distance lampe/canopée : 75 cm ​Climat : Jour : 25°C / Nuit : 21°C ​Humidité (HR) : 50% ​Tente : 1m80 de hauteur ​📅 Évolution & Entretien : Structure et Patience ​État de la plante : La Frost 1 affiche une santé éclatante. Contrairement à mes premières impressions, elle reste bien ancrée dans sa phase végétative et n'est pas encore passée en floraison. Elle profite de ce temps pour renforcer son tronc et ses ramifications. ​Hauteur actuelle : 33 cm (après LST) ​Vigueur : On voit clairement sur les photos que le tronc principal est massif. Les tiges sont vigoureuses et le vert du feuillage est parfaitement homogène. ​Travail sur la plante : ​LST & Structure : Le travail aux ficelles continue de porter ses fruits. J'ai pu écarter les branches secondaires de manière très précise pour aplatir la canopée. ​Optimisation : L'effeuillage léger effectué précédemment a permis de bien dégager les sites de croissance inférieurs. La lumière pénètre désormais partout, et la circulation d'air au centre de la plante est optimale. ​Gestion du système & Nutrition : rien donné ​ ​Vanne Autopot : La vanne est toujours coupée. Je reste vigilant et j'attends que le pot soit bien sec et léger avant de relancer le système, afin de garantir une oxygénation maximale des racines. . ​Résumé de la situation : La plante est magnifique et occupe l'espace avec beaucoup de force. Pas de fleurs à l'horizon pour le moment, ce qui me laisse encore un peu de temps pour parfaire sa structure avant le futur stretch. On continue de surveiller le séchage du pot pour une reprise de l'autonomie au moment idéal. ​À bientôt pour la suite !