🌸🍏✨🍭🌸🍏✨🍭🌸🍏✨🍭🌸 Hi and welcome to another Kannabia grow! This time I’m running their Apple Fritter (feminized photoperiod). She’s going to veg under 24hr light and be manifolded. Still cleaning the rest of my Candy Cream GF (11.04.25) — going to sow the seed tomorrow (12.04.25) *been lazy, sowed on 14.04.25 🌸🍏✨🍭🌸🍏✨🍭🌸🍏✨🍭🌸 --- 💭❗💭❗💭❗💭❗💭❗💭❗💭 ❗Events & thoughts worth noting❗ 💭❗💭❗💭❗💭❗💭❗💭❗💭 12.04.25 (GW1) – Cleaning + flushing the old coco coir. Might need to add another brick. *No new brick needed ✅ This is how I recycle my coco coir — fast, cheap, no BS. 🌿 Harvest plant ✂️ Chop roots small — they stay in for structure (organic perlite) 💦 Hot water rinse — remove salts & dust 🍶 Pre-soak with light feed:   Micro 10ml   Bloom 0ml   GreenBuzz 10ml   Cal-Mag 60ml   FFJ/FPJ 10ml (new disgusting batch)   pH down (citric acid) ♻️ Media stays — Roots stay — Back in service. 14.04.25 (GW1) – Planted seed in final pot ✅ 16.04.25 (GW1) – Did last tent clean up + setup ✅📸 17.04.25 (GW1) – Seed germinated 🎉📸 — roughly 48hrs in final pot. Solid start👌♥️ 23.04.25 (VW1) – Minimal burnt tips 📸 — not progressing, not a concern. 26.04.25 (VW1) – Started using the new batch of FPJ/FFJ https://growdiaries.com/diaries/266849-grow-journal-by-yan402 30.04.25 (VW2) – Increased TriPartMicro & GreenBuzzBloom 10ml → 15ml 03.05.25 (VW2) – Increased TriPartMicro again 15ml → 20ml, topped the plant, and added final layer of clay pebbles around the base, trimmed side branches and did LST in preparation for "manifold" 📸 08.05.25 VW3 finished manifold📸 13.05.25 VW4 Increased TriPartMicro to 30ml and GreenBuzzBloom to 20ml. 15.05.25 VW4 Done defoliation and LST 📸 18-19.05.25 VW5 pruned all the shoots bellow my "mains" and did a full defoliation📸 24.05.25 VW6 increased GreenBuzzBloom to 30ml 04.06.25 VW7 did a cleanup📸 11.06.25 VW8 increase TriPartMicro to 40ml 17.06.25 (VW9) – Final structure pass 💈🌿 Did a clean perimeter prune + removed weak shoots. Ended up with 12 tops, was aiming for less, but she made the call Didn’t fight it, just shaped it the best I could Airflow’s good, structure’s stable 🛑 No more cuts until post-stretch Pics coming shortly 😘 Flip coming soon — we’ll see how she handles it. 20.06.25 VW9 Switched lighting to 12 hours, may the stretch begin 🤞 22.06.25 VW10 Did a good LST session,made some pics, and came to some conclusions and a small change of plans: Originally planned for 8 mains — long, spaced colas and maybe a couple stronger “titans” if she wanted to go that way. But she’s showing me something else, and I’m not here to fight her — just guide her. Now after stretch, I’m keeping side shoots only if they: Fill real canopy gaps Don’t crowd neighboring tops (minimum 15cm spacing) Aren’t growing into walls or toward the next plant Anything too close, too low, or heading into shade gets removed. No point forcing it. Looks like I’ll finish with 14–16 solid tops, depending on how she settles. I’m just trying to give each one enough light and space to stack properly. No overcrowding, no larf — just letting her do her thing with a bit of structure. Increased Tri Part Micro to 50ml as well. 28.06.25 VW11 one week since I flipped to 12/12 and she is stretching nicely, a bit shy in showing pistils compared to the Fantasy Feast regulars I have in the same tent. 29.06.25 VW11 increased GreenBuzzBloom 30→ 60ml 06.07.25 FW1 TriPart Micro: 50→ 30ml TriPart Bloom: 0 → 20ml Home-made FFJ/FPJ (Watermelon + Pumpkin): 10 → 30ml 12.07.25 FW1 GreenBuzzBloom 60 →40ml, TriPart Bloom: 20 → 60ml, fpj 30→60ml 19.07.25 FW3 Got some bleached tops, been out and about at job interviews and didn't notice a last minute stretch spurt 😭, should recover fine though plenty of time left 😁 22.07.25 FW3 TriPartMicro 30→20ml , TriPartBloom 60→80ml , GreenBuzzBloom 40→50ml 24.07.25 FW3 Cal-Mag 60→40ml 26.07.25 got thrips but handled them with extra airflow and defoliation. 29.07.25 FW4 GreenBuzzBloom 50→20ml, Home-made FFJ/FPJ (new batch) 60→120ml 31.07.25 FW4 Home-made FFJ/FPJ (new batch) 120→200ml 13.08.25 FW6 CalMag 40 →30ml, GreenBuzzBloom 20→0ml 20.08.25 FW7 TriPartMicro 20→10ml, TriPartBloom 80→0ml, GreenBuzzBloom 0→60ml, CalMag 30→20ml 27.08.25 FW8 GreenBuzzBloom 60→0ml, FinalPartRipen 60ml 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 23.08.25 FW7 – Fed 2l of #1 → 0.5l runoff 24.08.25 FW8 – Fed 2l of #1 → 0.5l runoff 25.08.25 FW8 – Fed 2l of #1 → 0.5l runoff 26.08.25 FW8 – Fed 2l of #1 at 75% → 0.5l runoff 27.08.25 FW8 – Fed 5l of #1 at 75% → 2l runoff 28.08.25 FW8 – Fed 5l of #1 at 50% → 2l runoff 29.08.25 FW8 – Fed 5l of #1 at 50% → 2l runoff 30.08.25 FW8 – Fed 5l of #1 → 2l runoff (*RUNOFF reused for tomato plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30L #1 🍶💧🍶💧🍶💧🍶💧🍶 TriPart Micro: 10 → 15 → 20 → 30 → 40 → 50 → 30 → 20 → 10ml = 0.33 ml/L TriPart Grow: 0 ml = 0.00 ml/L FinalPartRipen: 60ml = 2.00 ml/L TriPart Bloom: 0 → 20 → 60 → 80 → 0ml = 0.00 ml/L GreenBuzz Bloom: 10 → 15 → 20 → 30 → 60 → 40 → 50 → 20 → 0 → 60 → 0ml = 0.00 ml/L Cal-Mag: 60 → 40 → 30 → 20ml = 0.67 ml/L Home-made FFJ/FPJ: 10 → 30 → 60 → 120 → 200ml = 6.67 ml/L pH Down: Citric acid (BuxXtrade) — adjust to ~pH 6.0 📦 TOTAL: 290 ml per 30 L 🔬 9.67 ml/L 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ --- 🍏🍪🌬️🍬🍏🍪🌬️🍬🍏🍪🌬️🍬 Apple Fritter (Kannabia Seeds) 🍏🍪🌬️🍬🍏🍪🌬️🍬🍏🍪🌬️🍬 Species: 50% Indica / 50% Sativa Genetics: Sour Apple × Animal Cookies THC: Up to 25% Effect: Euphoric, relaxing, creative Flavor: Sweet, fruity, pastry notes Flowering: 56–63 days Resistance: High Indoor yield: 450–500g/m² Outdoor yield: 600g/plant Structure: Strong, bushy, dense buds

Find out that the plants are male and female. Balls right under the female butts. So, it's easy to get rid of the male parts haha

Skunk Special, a.k.a. Red Skunk, stems from the infamous Red Skunk clones that conquered the Netherlands in the late eighties/ early nineties. Ferry started working on the Skunk Special in the nineties. The Skunk Special is the result of several S1 lines inbred with a 25% of Automatic. The current line was selected over several generations in order to retain the right and essential Skunk features, yet creating a fast flowering strain. Showing almost no variety between the individuals, this is among the most stable and homogenous strains since it was selected from a few thousand plants. This Skunk Special is a powerful and strong plant with thick, solid stems, creating massively tight buds during the flowering stage. The Skunk Special has gorgeous looking red pistils that give this plant an amazing bag appeal. Skunk Special is suitable for indoor, greenhouses and outdoors if grown in temperate and/or the warm Mediterranean climate. It is a massive yielding outdoor behemoth with amazing trichome production. The smell can be described as extremely pungent and citral with the classic cat-piss smell of the old-school Skunk. It is a very clean smoke. A Skunky and slightly sweet taste that is pleasantly acidic towards at the end. A mildly relaxing body high that causes a tingling sensation combined with a very pleasant head high.

This plant seems to have grown much denser and better than my first plant. I just got the ac infinity ventilation setup with controller 69 for my 2x2, still trying to learn, hopefully grow #3 goes even better. Stay tuned

Test run For Gelato OG and test review for Spider Farmer SF-2000 Day 1 Flower and so far I’m pretty happy with both phenotypes, they are growing very identical both in structure as in smell. Day 1 Flower and now the real testings begins, so far Ppfd numbers are around 800 Umols this numbers will increase with them girls growing , i have to admit I wasn’t expecting such high numbers, i like what this SF-2000 is debiting, especially wen is puling out the wall 198w 🤩 Day 3 Flower and they are bouncing back great from the hard defoliation, transplant and shuttle times lol i know I should’ve done all in once but they can handle it 💪💪💪 Day 3 flower and the SF-2000 is doing great and not hot at all compared to others same voltaje , so far so good 😊 Day 6 tiny update video online 💚🌱 Seeds @seedsmanseeds Gelato OG 3x - 2 Pop out Light spider farmer SF-2000 ( test run from seed to stone ) https://spiderfarmer.eu/collections/full-spectrum-led-grow-light/products/sf-2000-led-grow-light All i grow is medicine for myself, nothing to sell, don’t even ask Do it with love for the love 💚💚💚 growers love 💚💚💚

Sweet citrus caramel- love it :) There is a peppermint flavor Everything is going great. I think a little too much light - the leaves stand upright. The back side of the leaf has begun to darken - genetics.

Hello growers,💚 beautiful and strong plant .No problematic flower.🦍🦍🦍 Hnojení jednou týdně . Občasné pro oddělení půdy .

Remaining girls continue. Might plan harvest of white widow and Jack soon.

825 watts All healthy . Not much going on .

So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.

Looking really good. Not super stocked on the structure of the buds themselves but can’t complain about anything else. Seeing lots of foxtailing in the GD and GG but not at all in the other two - which is interesting. My guess is that if I had thinned the plants much more aggressively I would be seeing more of the photogenic large colas that I was after. Next time!

Accidentally snapped a leaf off her today during her LST 😣 other than that though she’s progressing slowly but surely, can’t wait till she comes in to flower now🤩 happy growing everyone ✌️ 🌳

Well, I harvested one of the gxz, which considering the space it had to grow in, gave me around 230g wet, so hopefully looking at 2 z when dry. Really happy with it. Big up Barneys Farm. Leaving the other gxz and the auto for another week. You can see from the photos, the autos aren’t quite ready yet. Looking forward to wrapping a skin around this and lighting it...

Very dynamic effect. Keep head clear and no stress. Crafty vaporiser effect is the best.

Here we are at week 6, day 43 already :) . Theses CBD20-1 are growing well no issues at all so far They seem to be able to handle full feeds with biobizz nutes I havnt really done much with theses girls , I have left them to grow naturally , I havnt even defoliated them . All in all everything seems to be going good with theses girls

Over all + Speed Auto is doing well. Seemed a bit slow taking off but she is progressing nicely. Had (1) seedling that completely stalled out. I went ahead and germinated another bean which was placed in soil (germinated tap root about 2 inches long) 5/18. Day 7: + Speed Auto showing second leaves coming in. Still slightly yellow, might be hungry or slightly over-watered. Will feed nutes in the next few days and see. Temp: 75º RH 75% PPFD: 300 VPD: .41 kPa Day 8: Just misting no water or nutes yet. Looking good. Temp: 75º RH 75% PPFD: 300 VPD: .41 kPa Day 9: Fed 2ml Cal-Mag, 2 ml FloraMicro, 1ml FlorGro, 1ml FloraBloom PH 6.2. Temp: 75º RH 70% PPFD: 400 VPD: .72 kPa Day 10: Responging well to nutes. Looking much darker green today, must have been hungry for nutes. Temp: 70º RH 75% PPFD: 400 VPD: .72 kPa Day 11/: Growing and looking darker green today. New leaf growth. Replanted new + Speed Auto in 3 gallon pot. ProMix HP. Temp: 77º RH 55% PPFD: 500 VPD: .67 kPa Day 12/Day 1: +Speed looking healthy. New seedling popped/ Day 1 under humidity dome (Gatorade bottle cut in half). Temp: 73º RH 62% PPFD: 500 VPD: .67 kPa Day 13/Day 2: New leaf growth. + Speed seedling coming along. Temp: 75º RH 60% PPFD: 500 VPD: .62 kPa Day 14/Day 3: New leaf growth. Fed 4ml FloraMicro, 6ml FloraGro, 3ml FloraBloom and 2ml CalMag. Seedling got spritzed/sprayed and left humidity dome in place. Roughly 1" tall with first leaves coming in. Seems to be doing better without rapid rooter start. Temp: 78º RH 61% PPFD: 500 VPD: .76 kPa