Processing
Likes
Comments
Share
voy por el mes casi. y la mas alta pasa los 30 cm . las otras promedian los 24.5. cualquier sugerencia gracias
Likes
114
Share
💩Alrighty Then Growmies We Are Back At it 💩 Well folks we just finished up the last run and so we are back to do it all over again 😁 So what do you say we have some fun 👈 We got some Gorilla Punch 👊 👊 👊 DAY 14 👉 Its been a really good week , lots of growth , just given water 💧 👌 Never the less we are moving along and so far so good folks👌 FC4800 from MarsHydro Lights being readjusted and chart updated .........👍👉Added an RU45 too the mix 👍 www.marshydro.ca 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
53
Share
Gave her a good clean up on day 47. Weather finally good enough to start bringing outside, trying to get hardened off so can plant this upcoming week. Was hoping to do at the end of past week but had to many rainy days and still getting too close to frost at night. Outside 2 days this week temp ranging 18-28 degrees sun/shade as day progressed
Likes
22
Share
@funkyb
Follow
finishing week 3 of stretch. Plants started to look pale, unclear if it was leaving the rez on too much vs. just hungry for higher EC. Towards end of week pulled them out of the trays and put drip trays in to give them a top-feed with generous runoff + some recharge. Pics of that are more in next week's photos.
Likes
31
Share
@Reaper
Follow
So week 8 flowering, the plant in the back starts to get purple tints (night temperature drops to 12celcius. trichomes on both plants are cloudy (on top) at bottom they have clears left so i go another week and well see what happens. i give only tap water now dont mind the butterfree hes protecting my buds from sneeky neighbours
Processing
Likes
3
Share
I use all biobizz and a few advanced nutrients Cal mag overdrive big bud flawless finish. Looking great really impressed much more stability in the growth structure.
Likes
8
Share
@Random80
Follow
She was left alone for 10 days but it turns out that I managed to leave just the right amount of water in autopot. She used all the water and dried out her root just at the same time when I was back. She recovered nicely from overwatering and went pretty high witch was expected for part of sativa genetics in her. She was already in flowering phase but I still I decided to apply some heavy LST to lower her down and spread around the grow tent since she is the only one in. She has now covered 70% of my 80x80cm grow tent. Also I used BOOM BOOM spray twice to save her from LST shock. First added bactrex 1 gr, orgatrex 20ml in 1 lit (BIO TABS) . After that I was using combination of 2ml orgatrex and 2ml of BIO PK 5-8 in 1 lit water with each watering. And she really started to use loads of water, 1,5 lit per day. No photos during week 5 so I added early week 6
Likes
31
Share
@MrJoint
Follow
✌️🎃 Thank you for checking my cultivation. 🛁 Last week of roots washing. 😍 She’s small, fat and smelling a lot.
Likes
8
Share
@GYOweed
Follow
This was random of the cross i made. No hermies. Probably 10 weeker indoors. From golden to this one the lighter the color the creamier it is.
Likes
24
Share
Bueno esta genética es una maravilla, es súper fuerte no a tenido por ahora ningún tipo de carencia ni de plagas es una planta muy sana y fuerte.
Likes
3
Share
Tuesday Ok so the plants are doing really well. One of the kalini Asia plants is in the only regular pot I’m using now. It’s a little larger than the AutoPot XL’s so therefore the plant is slightly bigger but spread out because I topped it a while ago and today I took all the bottom leaves as well as quite a few of the lower lateral branches that well small and weak. Hopefully this will encourage the energy to where it want it - The main growth tips! I think it was the other kalini Asia that is in the AutoPot XL that I ended up ‘super cropping’? Do correct me if I used the wrong term. The main growth stems were quite a lot higher than the large lateral branches so I squeezed the stem with my finger and flopped the main colas over then taped them and tied them to support them. The canopy is MUCH more even across all plants now. They look a bit bent over at the moment but I bet when I look tomorrow they are all facing the light again. Magic! They are def in the stretch phase now. They are growing like crazy. I’m really glad I did the nasty job of pulling each plant out and tying it down and cutting off the shit that won’t grow anything good. Oh I also gave them a watering from the top using lots of microbes (ecothrive biosys) and molasses dissolved into warm water. The res was basically empty and honestly the AutoPot XL’s don’t even look wet at all on top even though they are getting all the water they need. They don’t react negatively when I occasionally water goodies in from the top so it’s all good!!
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
20
Share
@VnknowN
Follow
The baked in Paris Is really Building up, i keep u updated. But the tropic ozz…. Absolutely lightstressed. I decided to cut her when the baked in Paris Is ready and i think i want to use the whole plant for alcohol extraktion.
Likes
9
Share
@Siriuz
Follow
Hey there guys Check out this week spoilers From Feb 14 til Feb 21 we gonna be showing up vids and pics fellas Also, tomorrow the 20th we got to feed the girls, we got to keep them tight at the LST so we need to stick an eye on them for them to grow and yield the way we want to Hey any advice is more than welcome feel free to post any comment or what you feel Let us know how we can improve our diaries, pics, vids, just let us know what you think about us and what do you have for us to share on a positive vibe always of course Take care growers good vibes and good luck with your grow to all of you At the grow diary community and for those who haven't found us yet We here we salute you And we send you blessings Canna growers won't stop growing Jah bless us all Let's keep it up and rock and roll
Processing
Likes
21
Share
The plants were so crowded I decided to put them into a Larger tent to allow some light to the lower bud sites and to help lower the humidity amongst the plants. I'm sure they will love the extra space. The light has now been raised 20cm (20cm taller tent) Allowing me to turn out right up which is 45000 lux in the centre right below it. I will up the bloom to 2ml/l this coming week.
Likes
4
Share
@Filiaes
Follow
23.06 Day 59 of bloom, from now on I check the trichomes more often. 26.06 Cleaned the tank and prepared a new solution, to flush the plants, since I see enough amber trichomes developing. I still add some major nutrients. EC level is at 0.6. I will continue to flush until 04.07 - day 70 of bloom, afterwards I will waterstress them, if they are not ready already.
Likes
174
Share
@Roberts
Follow
Well 85.9 grams of goodness. Has a great smell and flavor. Very head heavy smoke. If you like high thc or even fruity buds this is a good one to grow. If anyone is interested in any fast buds strains my affiliate link is https://myfastbuds.com/?a_aid=60910eaff2419 If anyone is interested in a Viparspectra light I can send you to a affiliate link, and look for discounts though my affiliate program as well. Please direct messages me for more information please. Thank you grow diaries community for the likes, follows, and subscriptions on my YouTube channel. I really appreciate the support. 🌱🌱🌱 happy growing 🍓🍌🍓🍌🍓🍌🍓🍌
Likes
167
Share
🗓️ 6° WEEK FLO // DAY 36-42 (from switch) // DAY 113-119 (from dry seed) ⚡- Light: 30 cm / 250 watt; ⌛- Schedule: 12/12; 🌡️- 22° C - 65% RH average; 📑- PH 5.9 - EC 2.3. PH is dropping on the #2. I'll change the DWCs next week, meanwhile I'm trying to keep the PH in the right range; 💧- 7° DWC change; 🍔- Flowering blend: tap water EC 0.4 + Silic 0.5 ml/l + CalMag 1 ml/l + Hydro A-B 1.8 ml/l + Oligo Spectrum 2 ml/l + Green Sensation 1 ml/l; 🌱- Things are moving forward, both are gaining weight. 🆕- Last week I got the TrolMaster TCS-1 (@TrolMaster_Europe) and I started to track my grow box data. I will add these info once I harvest!
Likes
10
Share
@Rawel
Follow
Finally!!! It was her last week on veg! It’s time for much more interesting part of the grow now :D Everything looks very good, she’s healthy and start growing really fast now ;) Today I cut over 40 heads off before switching her for flowering. Almost everything below the net has been removed. Next week I’ll mount another net above. See you in a week!
Likes
41
Share
Bonjour les Growmies, encore une fois je vous remercie de venir visiter mon journal. J ai passé ces Unicorn Sherbert 🦄🌈 @CultclassicSeeds en flo apres juste 3 semaines de croissance.Je n'ai pas trop l habitude d avoir une si petite croissance mais comme dans la tente j ai 3 pieds qui ont beaucoup plus de croissance que d habitude je me dis qu il y aura une bonne moyenne dans la tente. Les plantes en elle même sont magnifique avec de très grande feuilles d un vert profond .Elles sont toutes les deux bien marqué comme hybride Indica le stretch ça bientôt commencer.Mais je croise les doigts demain j ai ma tente XxL qui arrive Avec ma nouvelle lampe temps attendu FC E6500,💯🔥🔥🔥🔥🔥🔥grâce à cette lumière 💡☀️je compte que mes Unicorn s ressemble a Pegasus et s Envolent en galopant 😁😁😁😁 🌈🦄24/09 Les unicorns ont galopé vers de nouvelle contrée .Et elles se sont installées dans une tente beaucoup plus grand et avec une meilleure lumière un véritable bonheur.🦄🌈. A côté des autres génétiques leur tige principale est énorme grosse comme mon pouce .C est impressionnant pour le peu de croissance qu elles ont eût 25/09 Encore une journée de passer apr s le passage en 12/12 J ai deux phénos différents les différences commencent à se marquer .Une beaucoup plus touffue que l autre donc je vais les appeler #1 et #2.La plus touffue est #2. Sinon elles ont des feuilles énormes avec un vert éclatant.