Likes
Comments
Share
@Guaxi
Follow
White Widow survived! She started growing all the leaves at the same time. There is some fractal shit going on with the leaves, which is very visually appealling for me. I discovered that I like taking care of the plants, make me calm, and is a new nice and healthy hobby. The plants are listening to classical music and "582hz music" 18 hours a day! :)
Likes
27
Share
@420
Follow
Das kleine 150 Watt Licht macht sich bemerkbar. An Tag 40 sind sie schon etwas zu sehr ausgetrocknet. Dann mit 2L pro Pflanze gegossen.
Likes
5
Share
@Lazuli
Follow
She has smaller flowers this time but more dense, purple fade at the end that indicates shes very blueberry
Likes
43
Share
This was a beautiful week. The girls started to flower, they feel really nice. There were no significant changes, everything goes as expected. A ladybug visited my garden, I decided to keep her as protection from mites. I never had problems with them, but we can never know. :)
Likes
142
Share
Hi everyone đŸ€—. The end of the last remaining women is slowly approaching 😍. They all look beautiful and will all be ready in the next 6 - 12 days 😎. I am very excited about the tastes 😍. I wish you a lot of fun with the diary, stay healthy đŸ™đŸ» and let it grow đŸŒ±đŸ˜Ž
Likes
4
Share
@pzwags420
Follow
On day 1 the reservoirs PH is 6.3. The rez is 483 ppm. The girls are looking good and nitrogen toxicity seems to have stopped. On day 2 the reservoirs PH was adjusted from 6.1 to 6.3. The rez is 477 ppm. Trichomes seem to be 10% cloudy so I still have a bit to go i'm thinking 9 weeks should be a good bet! On day 3 the reservoirs PH was adjusted from 6.4 to 6.1. The rez is 500 ppm. On day 4 the reservoirs PH is 6.2. The rez is 503 ppm. I lowered the ppfd so my tallest received 900 ppfd and an average of 543 ppfd. On day 5 the reservoirs PH is 6.2. The rez is 519 ppm. I removed some of the extra fan leaves blocking bud sites. On day 6 I changed out the reservoir with only tap water and adjusted the PH from 6.7 to 6.1 with a ppm of 249. The trichomes are maturing and I plan on harvesting on week 8 day 4 of flower. On day 7 the reservoirs PH was adjusted from 6.5 to 6.0. The rez ppm is 250.
Processing
Likes
23
Share
@HanzGrowz
Follow
Amazing progress across the board in the tent the last week. Development has been positive for The New and Black Dog, Bubba has swollen up bud wise, and it’s still another week away or so (flowering is supposed to be 50-55 and we’re at 50 today). Chemdawg smell is getting stronger but not too aggressive, and it’s fate king nicely on most colas. Even at the bottom of the plant the buds look nice. It’s an amazing strain, can’t wait to smoke it.
Likes
14
Share
Going to start a few grows to get a supply train going. Once I do these 4 seed, all I have to do is grow 2 plants at once and I will never have to buy again.
Likes
8
Share
@Uzi420
Follow
111g de buds secs et d'une qualitĂ© vraiment supĂ©rieure, un goĂ»t trĂšs fruitĂ© et sucrĂ© sur fond terreux 😋😍 De petits buds mais en grosse quantitĂ©, incontournable, je conseille vraiment cette strain mĂȘme aux dĂ©butants !
Likes
7
Share
@PCGrows
Follow
This is more preflower week, bud sites emerged bud plant is hasn’t quite stretched yet. This’ll be the week she gets y’all or I know my pots are a little too big and she’s working to much on root growth those first weeks
Likes
7
Share
Die zehnte Woche beginnt und sie sieht ziemlich zerlottert aus. Die BlĂŒten sind ein purpliger, pinkysher, funkelnder Harz Traum 😍 Die DrĂŒsen trĂŒben sich weiterhin ein und sie verströmt einen tollen Duft aber ich denke es werden jetzt die letzten Tage und diese Woche ist Schluss. Kann ja nicht ewig warten, oder ?
Likes
9
Share
@Porky97
Follow
Hey people this is my week 5 update on my grow I'm new to all of this and happy enough to take any and all comments and feed back let's learn and grow together Stay safe👊take care and stay stoned🍁
Likes
4
Share
@MXHerc
Follow
Up-potted the 4 weedlings, pink wooly is looking the best for non auto and chemdawg for auto. Kiwi x kiwi is still the smallest plant. They were all topped and foliar fed after being transplanted into a soil blend
Processing
Likes
3
Share
@Ticfusama
Follow
Harvest day!!! Got her chopped and hung last night right on time at day 70. Her buds turned out nice and dense, smell amazing and heavy af. This was a wonderful grow! Managed to pull a good few seeds from the branch i pollenated with zkittles pollen (red tie in vid). There are more still in the bud too! I am looking forward to popping them down the line. I will update the harvest week with the hard numbers when she is dry. Happy growing all!!!
Likes
24
Share
SWISS DREAM ROSEđŸŒč CBD AUTO KANNABIA SEEDS WEEK #5 Overall June 23rd-30th Week #2 Flower This week I had to adjust the feeding a little as she got a few burn spots on the leaves new organic soil and nutrients so learning what the plant wants and doesn't want. Stay Growing!! Kannabia.com SWISS DREAM RIDEđŸŒč AUTO
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diaryđŸ€œđŸ€› TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.Â