Week 3F begins. Raised the light a bit, will see if it makes a difference with the leaves. Bud sites are popping and looking good for their small size. Thanks for stopping by.

Welcome to my next grow/experiment! Amnesia haze holds a special spot in my heart ever since I experienced it at the Amsterdam cannabis cup in 2012 - really looking forward to this one. I have plans to top once and hopefully be successful at making a clone to reverse. From there I’d like to maybe make some F1, and S1 seeds as well as breed it with the cultivar sharing the tent: Mephisto’s White Wedding. Started off germinating on Saturday 2/3 by soaking the seeds in a cup of water for 24 hours before transferring to a wet paper towel. On Tuesday 2/6 tap roots were present and they were moved to rapid rooter plugs and put into a humidity dome. On 2/11 they had sprouted up 3” and were transferred to the top fed RDWC system. Filled the reservoir following General Hydroponics 10 part chart at light strength and diluted by 50%. SE7000 is ~30” above at 40% providing ~270ppfd.

**************Sponsored Grow*************** Hello friends and followers to my weekly Titan F1 update: 3/17-23 This week is mostly coasting and keeping my girls happy. Bud stacking continues giving more height. This week both gals did some more bud stacking .5 inch each. T2 is now 5 inches. T3 7.5. You can see that in the profile pics. 3/19 Whew, my gals got a haircut this week. T2 teapot gal was so bushy and dense. I removed some leaves off and some pinning. Note: for future grows the small diameter of the pot made it very difficult to trim T2. Very tight squeeze even for my small hands. This opened the lower buds and showed off T2 roots, ¼ inch on a 5-inch plant. The main stalk is sturdy. As I was trimming the lower area, I was bending the plant over 2/3 the way and there was no breakage. T3 got the same trimming but removed fewer leaves than T2. I also washed out their drain pots. For some reason, algae is developing in the catchments. I am now within 3 weeks. RQS says harvest 70-75 days or 40-45 days of flower. Harvest is getting close. My calculations – harvest of T3 will be April 13-18 and T2 15th-20. Thanks for the likes and comments, I appreciate all the plant love💚. Have fun & love what you grow 💚 Sending love and light 💫 💫Natrona 💫 **************Sponsored Grow*************** Royal Queen Seeds is the first to off genuine F1 cannabis seeds. F1 hybrids are the future of cannabis genetics, offering unrivalled stability, vigor, and yields. They have eight (8) F1 hybrid strains including a CBD. Unlike regular hybrids, which can be created by crossing virtually any two cannabis plants, F1 hybrids are made by crossing two pure (also known as "inbred") genetic lines. The resulting seedlings not only grow bigger and stronger, but also maintain stable growth traits that result in a uniform crop. In Rocket to the moon, I grew one Apollo F1, (please refer to my diary for full details). Huge base stalk, strong stems, remained under 3’, and yielded over 4 ounces. They have come down in price since their introduction. I was so impressed by the yield and growth of Apollo, I strongly urge you to look at the site for a variety that has what you are looking for. I would like to express my sincere thanks to @James at @Royal Queen Seeds for giving me this opportunity to grow their quality seeds. It was a hard decision to select the strain to grow; I’m excited to grow Titan F1. ==================================== Royal Queen Seeds Https://www.royalqueenseeds.com use Discount Code use **GROWERS20** for 20% discount Titan F1 stands out as one of the most potent options in F1 hybrids. Thanks to her genetic lineage, she produces sky-high levels of THC and boatloads of delicious terpenes. Plus, plants reach modest heights while churning out impressive yields. Talented breeders created this F1 by crossing inbred lines that share a heritage with Blue Dream, Sugar Magnolia, and Amnesia. Effects, Flavors, and Aromas of Titan F1: Powerful Effects and Sugar-Citrus Notes Titan F1 will treat your olfactory system throughout the flowering phase, and beyond. This auto flowering variety unleashes a powerful terpene profile consisting mostly of myrcene, farnesene, ocimene, pinene, bisabolol, and limonene. Combined, these aromatic compounds offer notes of fruit, candy, and lemongrass. With the highest THC concentration within our F1 hybrid range, Titan F1 exerts a powerful and fast-acting effect that melts the muscles and clears the mind. Perfect for enjoying after a long day at work. Growing Titan F1: Stealthy, High-Yielding Plants With an average height of 65cm, Titan F1 can grow just about anywhere and maintain a low profile. This bushy plant features an indica morphology, a huge trichome count, and develops into a mature specimen in around 73 days from germination. Gear up for a uniform, consistent crop that will thrive in practically any environment. Titan F1 data sheet Variety: F1 Hybrid auto Genetic Background: Blue Dream x Sugar Magnolia x Amnesia THC: Ultra-high Yield: XXL Height:55 - 75 cm Flowering time:40 - 45 days Harvest:70 - 75 days after germination Major terpenes: Caryophyllene, Farnesene, Myrcene, Ocimene Effect: Calming, Focus, Physically Relaxing, Uplifting Flavor: Candy, Diesel, Herbal, Pine, Vanilla Climate: Short Summers ================================= Equipment: AC Infinity CLOUDLAB 844 – Advance Grow Tent 48”x48”x80” CONTROLLER 69 PRO – Grow Tent Controller CLOUDLINE LITE 6 - Inline Fan 6" IONBOARD S44 – LED Grow Light Board 400W CLOUDRAY S6 – Oscillating Circulation Clip Fan Carbon Filter 6” Pots: 2 liter wire basket tea pot 3 gallon Air pots Soil Fox Farm Happy Frog Amended with worm castings, dolomite lime and mychorihiza Seeds provided by Royal Queen Seeds Https://www.royalqueenseeds.com use Discount Code use **GROWERS20** for 20% discount Nutrients: Total Plant Solution TPS1 Canopy Signal

It’s day 33’from seed. All of the plants are really healthy. The plants have a really great root system at this point… I am currently slowly moving the light intensity up to the veg area. Now that are in a groove they are about to explode… I’m hoping I can flip the plants to flower in 1 weeks but I’m thinking I will wait to weeks and let them get a little larger. The plants are just now starting to look visually different next weeks update I will be ababoe to go into the visual differences, they are just not that extreme yet to really talk to much about.

Day 71 - Starting week 11 and overall looking good still but have a ton of bracts/calyx that are not throwing out pistils. They seem to slowly be coming out on some but looking like I’ve got a ton of them without pistils and no buds actually forming, not sure if I’m explaining it right, all still fairly new to me. The only thing I can think to do is just let it ride for awhile longer and see what happens. Day 73 - Looks like a few more bracts/calyx’s are starting to open and show more pistils. Some have thrown out a single pistil and started to shrivel already. She’s got a lot of milky trichs but still think she’s got a good couple of weeks left, hopefully she’ll fatten up quite a bit. Ended up giving her a gallon and a half of plain pH’d water today as well. Not sure why I didn’t research or why I didn’t think of it but she’s definitely foxtailing so hopefully cutting off one light will help slow it down a bit or something. She’s nice and frosty and stinky so not too worried about any ill effects from it but still not happy. I’m sure a combination of lights, a little heat and a screw up somewhere on my part stressed her out too much. Oh well, every grow is different and is a learning experience. Day 74 - Still chugging along and even though she’s foxtailing, she’s starting to open up more and throw pistils. Other than that, not much else happening with her. Day 76 - She’s still chugging along and not much to really update today. I know she’s foxtailing quite a bit but just letting her go to try and get as fat as she can. Still a lot of clear trichs and bright white pistils so a bit of time still left. She’ll need some water tomorrow for sure. Day 77 - The end of week 11 and I’m probably gonna give her another week then possibly chop. She is just about all milky and just don’t see her fattening up much more. I did give her one more round of nutes today but that’ll be it until the end and just straight water from her on out. If I see some fattening up, then may let her go longer. I may possibly do a partial chop and then see what happens with the lower stuff.

This is a wonderful week of flowering. This week I had to reduce the dosage of my main flowering nutrient, because I started to give them green sensation. I will increase the dose later on step by step back to normal as I see that the girls are okay with it. I had to increase the light distance again, because some of the leaves started to bleach as the lights were too close. That's it for now, I am hoping to see a nice progress in the next few weeks, so stay tuned!

After our initial week with small issues keeping temperature and humidity consistent; we added a fan, hung our carbon filter and fixed the ducting to lower ambient temperature. We have also polyed off the entire closet to better control the environment. Our humidity and temperature have become dialed! Plants are both growing well and stretching nicely. Noticing on plant number one that it is now growing new fan leaves below where they had skipped previously. We did top it earlier in the week. Number two is growing strong, still has some browning from the heat with lack of humidity in the first week but still growing strong! Number 3 is growing strong now that the shell has fallen off. It is standing tall! Cannot wait to see how week 3 looks!

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

It was time to chop one of the girls. After wet trim scale show 547g what I find a great result. Second plant will stay in the tent for about a week longer. First one: from 547 wetwith some stems I finished with 102g dry and trimmed Second one: 617 wet harvest, dry 135 Final weight from two plants is 237g so I'm super happy about this grow.

Hello everyone! Welcome to my Tent-X Ultimate Grow Challenge diary. 💪 I'm germinating 2 seeds from every of the selected cultivars on paper towels: 👉 Strawberry Cough (Dutch Passion) 👉 Mimozz (Perfect Tree) 👉 Slurricane (Advanced Seeds) 👉 Cherry Atomic Sledgehammer (Welcome To The GrowTent) Did not have much success this time - germination rate was just over 60% - my worst in years. But still - I'll get enough plants for my tent - I always try to sprout 200% of what I really need, for ocasions like this one. 😎 After they germinated I moved sprouts to easy plugs - which is wher they normally start they life (I usually ommit paper towel step and go straight into plugs). First time in years I'm really having problems with germination. The one Slurricane that did germinate seems to have broken growth cone or something - it is no growing at all. Mimozz seems like it wants to die so it probably will... I did drop one more seed just to be sure I have at least 4 plants: 👉 Grandpa's Cookies #6 S1 (ETHOS Genetics) More updates coming soon 👋 Thank you, come again! 😅

No problems

Transplanted from the 7 gallon plastic pot to a 25 gallon fabric Major defoliation and skirt day 1 flower expect this plant to get insane and fill the whole tent, it may potentially overgrow the blackcherry sherb clone that's in week 6 currently making a beautiful transition of production space keeping the flower tent with no unplanned space. staying 10 steps ahead but understanding the moment|Raven

Over all was an amazing grow, super sticky dense nugs with smell of berries, highly recommended for everyone!!

Tag 22: getoppt bei 4 Nodien. Tag 24: Umgetopft in einen 15L Topf. Tag 25: Ich fange an die Zweige runterzubiegen.

Hola a todos!!!. Esta preciosa sigue engordando💪🙌🤩. Seguimos con el mismo riego de fertilizantes como la semana pasada. He comenzado a combatir trips con jabón potasico.

Day 106. Trim jaiiiiiilllllllll !!!! First done, think it could reach my record 240. Insane quality. 4 rows of solid buds hanging .... Next one .... Both finally finished and honestly, that's my plants to be proud of !!! Day 114. All is done, no doubts its my best grow. Happy Growing !!!