A planta fastberry apresta uma anomalia na metade da planta, com folhas atrofiadas e brotos nascendo viradas para baixo, não sei o que possa estar acontecendo, se alguém tiver uma dica provável. Obrigado

Loving how these girls are growing Fastbuds mystery #1 finally catching up, and may possibly in the end being a better producer than the RQS plant, which is surprising to me because of how badly I stunted this plant. Got me curious how good this plant could’ve been

Marshydro supported grow Spliff Seeds CBD Spliff Berry/Afghani Gold Anesia Seeds Hyper Glue/IMPERIUM X/Captain Future/Blackberry Moonrocks New week in marshydro set-up The week 5/4 plants doing great I added a extra strain in the mix the Seeds Mafia Headshot sadly only 1 survived better then nothing . I will probably start flowering phase next week depending how they grow Probably come flowering time Black berry moonrock imperium X and headshot will be put in the 100X100X180 with the TS-1000 so they can veg some more 21/10/21 Couple of days ago i catch some ladybugs to put with my plants but didn't see them but there finally reach the plants woehoe Decided to order some 11L pots to transfer them in so before flowering i probably transfer them so roots can grow some more also gone try Mycorrhiza Mix with transfer A update of using the new marshydro set-up The FC-4800 is a absolute beauty of a beast the change from growing under a marshydro TS-1000 to a FC-4800 is night and day nothing bad about the TS-1000 it deliver me a great first run with 4 plants absolutely amazing lamp to start with no doubt . But since i am growing 9 now and soon maybe 12 the FC-4800 will for fill that task with no problem what so ever 💪🏻👌🏻 Marshydro gets your bud's frosty and reaching for the ✨ Also the new 120X120X200 tent Is of class of it's own bin growing in a 100x100x180 tent and has worked fine and will stil be used for plants that are en early grow stages together with the TS-1000 . The 120x120x200 makes everything much easier for me and my back 🤣 the 2 side holes now where I can reach the back for my grow 🤘🏻🤘🏻 Also the space i have now is great for the amount of plants i will be growing i am loving it visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Al corte ✂️✂️✂️

And the winner is….. Divine Kush! To say the least, she fought the most and she really shined through. If you see the video above 👆 you can see how wowed we are by her, not only because she sprouted her own seed within herself but also because it shows how much moisture she had to deal with and she sort of found an interesting way to disperse of it! We did try to plant her seedling but unfortunately it did not survive but we are still in awe of it happening before our eyes. Nature is amazing and Our Kushy girl is very much appreciated, she has taught us quite a bit this year. WOW 🤩💚✌️ Plz note, we totally forgot to weigh her.

Die Frühblüte ist erreicht :)

😄🤟💯

After 48 hours of darkness, the time had come and the Purple Lemonade were ready for harvest. Since she reacted very well to the training and grew with enough space between the buds, I decided to dry upside down. Dry weight and smoke report follow after curing. Stay tuned...

Dear diary, Week 10 total and week 1 of flower is behind us. Will just be making sure all tops are exposed and somewhat in the right place as I let them stretch for about 21 days before some defoliation. 🌸🌸🌸🌸🌸🌸🌸🌸🌸🌸 ⏰ Day 67: Feeding was given in the evening with a solution of 1.87ms and pH of 5.6. During this feeding, I guided most of the tops into their designated positions within the net, ensuring they are adequately spread out to receive optimal light. I also checked the runoff, which measured 2.3ms, but considering the extra dissolved salts from full draining and collection that would be higher that it really is, I will aim to bring it back to the desired range of 1.65-1.7ms to be sure. ⏰ Day 68: In the evening, the plants were fed with a solution of 1.64ms at a pH of 5.8. ⏰ Day 69: Evening feeding consisted of a solution with 1.66ms strength and a pH of 5.9. I also took the opportunity to confirm that the lights were positioned at a 48cm distance from the canopy. Additionally, I'm testing the exhaust system by venting it outside the room. Currently, the relative humidity (RH) ranges from 53-55% during lights-off and 58-60% during lights-on, while the temperatures remain around 18°C with lights off and 23.5°C with lights on. These conditions fall within the desired vPD (vapor pressure deficit) range of 0.95-1.2. ⏰ Day 70: Feeding was carried out in the evening using a solution with a strength of 1.66ms and a pH of 5.9. To enhance air circulation, I added a fan at the top of the tent. Furthermore, I checked the light intensity, which measured around 760-780ppfd. ⏰ Day 71: During the evening feeding, the plants received a solution with a strength of 1.64ms and a pH of 6.4. The RH levels range from 55-65% as the girls get more bushy, while temperatures vary between 23-18°C, depending on whether the lights are on or off. ⏰ Day 72: Evening feeding included a solution with 1.64ms strength and a pH of 6.4. ⏰ Day 73: The plants were fed with a solution having a strength of 1.66ms and a pH of 6.0. As indicated by the feeding schedule, the A+B mix was increased to 3.5ml/l. I also ensured that the lights were positioned approximately 50cm above the canopy and set to 90% intensity to provide additional heat.

Las Ak parece que tienen un problema creo que tiene que ver con CalMag pero no estoy seguro, la otra no está afectada. Bajé la EC pero no se si tengo alguna carencia exceso u otra cosa. El dia 21 subo altura de luces al máximo el día 22 bajo la potencia de los quantum boards de 440w a 350w

Well tying down is no longer an option, now the fight is to get them to stand up!! #shittyproblems No let up on white hairs yet!! It makes me sad and happy at the same time lol

the girl is growing perfectly :) although there were several really strong storms, it didn't hurt her:) from today I'm leaving her alone for 6-7 weeks :( I'm going on vacation, so only her and nature will be left :) there will be an update, you'll just have to wait for it :) good luck to everyone: )

2022-10-30 The Seed was gifted to me by my Growmie @Oimrausch thy Buddy! She was growing from beginning very well Turned out to a strong well structured Plant Buds are dense and Thick, she smells super This Run was one of my Best, I feel iam reaching good Levels in the Growingconditions VPD, Wind, and Fertiliser helped the Genetics to show what they got!---- Especially to mention are the Hyphotonflux HPF-4000. All Plants responded very well to the Lightspectrum

Hello growers,💚 beautiful and strong plant .No problematic flower.🦍🦍🦍 Hnojení jednou týdně . Občasné pro oddělení půdy .

First week of flower in the bigger tent and on the Autopot xl smart pot system. Trying a new product on this run which is rock resinator which starts on Monday. Will leave these now to grow through out each week till day 20.

Babies are getting tall and stretched, looks beautiful and still no issue, I must adjust properly the ph since my pen is not working anymore but still there’s no sign of any problem. Hope to end by beginning of June!

Week 4 – Things Are Looking Good Starting off Week 4 with a little experiment – decided to try a SCROG on one of the 7 autos, just to see how she takes it. So far, so good – she’s bouncing back nicely. These F1s are really something! The rest of the girls are doing well under LST, spreading out slowly and steadily. Everyone looks healthy, and growth has been pretty consistent all around. All in all, a smooth week so far. The tent’s looking better every day – curious to see how things develop from here.

RQS Titan F1 week 5 Hello friends and followers, 2/25 This has been an exciting week. My Titan girls started flower 🌼. T3 in the 3-gallon air pot is larger at 6.5 inches. Last week I noticed her new growth was getting long and thin. A sure sign the pistils will emerge in a day or two. T3 started flower 🌼on 2/25. 2/26 Surprise surprise, T3 stretched an inch overnight and T2 about a.5 inch. That stretch meant I had a busy plant workday ahead. First, I defoliated T3 since I could see what I had to work with. Then because I’ve been following @yan402 on his Titan grow, I said I was going to top her. He said its ok if done correctly and at the right time. Well, fingers crossed 🤞, I hope it was not too late or cut in yhe wrong place since T3 was already in flower. Her short (.75-1” long) stems are so close to the stem, it was difficult getting the tie down pins placed. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering 😅 at 2.5 inches. T2 was defoliated on 2/26 as well. Her defoliation pictures above show how many I was able to trim off 7 and the leaf relative size. T2’s largest leaf is the size of a quarter and the smallest set I cut off, about the size of a penny. I keep supplementing and folar spraying with Cal-mag but the internodal chlorosis is still visible. I think Teapot gal (T2) has a copper excess.  Slowed Growth,  Fewer branches  Internodal Chlorosis  Stumpy roots (I won’t see this until I harvest and reveal the root ball) Given these symptoms of copper excess, and that RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. How I wonder? The copper wire is separated from the plant and soil by coco liner (which should be neutral, then coffee filters because I thought the soil would was out). Then the soil and plant. T2 is towering at 2.5 inches and started flower on 2/29. I expected a delay in her flowering time (4 days after T3) since she was transplanted to the teapot when T1 failed to thrive (maybe also the teapot cause?). Any time you train your plants, the stress causes delays in flowering then harvest. I defoliated T2 on 3/1 day 30. The pictures after defoliation show the tight node structure with 3 or 4 nodes crammed in only 1.5 inches of the main stem. Sheesh. So, as we enter March, we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest will be April 13-18. Be sure to come for my tea