*********HARVESTING MARCH 14, 2018*************** (my first harvest!) Mar. 11, 2018 FINALLY!!!! 4/5 plants are showing me nearly mature (for our purposes anyway) buds. Most of the top colas are turning a light golden and the sugar leaves are crisping up nicely, starting to see amber on the calyx's.Have watered with plain R/O water ph 7.0 with nothing added for the last 2 weeks. I'm pretty sure I will do a complete harvest and not try to stagger it, I'd like for the bottom buds to get a chance to fully mature but for this round I want to just do a single harvest and keep the immature buds separate. It's been pretty dry here but I think a 5 day dry will be possible, after all the point is to bring the moisture content down enough to seal em up and cure properly. ... Mar. 9, 2018: Nothing new to report. Lost a couple very small buds due to falling over and breaking their stems. No way i'm going to tie up the dozens of golf ball sized buds in danger of falling, i'll just continue to tuck them back in and hope for the best. The frostiest plant seems like it will need at least a week or two longer than the rest, only just showing signs of amber on the fan leaves, and sugar leaves aren't crunching yet. One girl is very near ready, as soon as I see 10-15% amber on the calyx's and the buds have a golden hue with discolored and crispy sugar leaves then it's chop chop. Measured my runoff at 450ppm still Mar. 6-7, 2018: We are at the end of week 7 of flower. Going to be feeding water only for the duration of the grow. I'm hoping to see the buds start to enter the last stage and give me that golden hue I'm looking for. Getting more amber trichomes on the fan leaves and should see the golden hue migrate to the calyx's. ... Mar. 5, 2018: Starting day 92 from seed and 46 days since first pistils. None of the buds are shooting out new pistils so hopefully over the next 2 weeks the calyx's will swell and the trichomes will mature and the bud will take on that finished look. I'm already starting to see a few ambers, but with the crop being seeded it wont' be easy to track the calyx development as some are filled with seeds and already appear swelled.

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Buds keep coming along and start to bump, more and more frosty 🌲❄️ 💡I've removed 2 hours this week, in 2 times, 1 hour start week, 1 more hour removed mid week, because I'll have soon some photoperiod in the tent, ⏰️ 20/24 On 💪keep removing some leaves 🍃 💧 Give water each 2/3 day 1.5 l Water + Roots + Zym + Bloom + Green Sensation (1 + 1 + 5 + 1 ml/l) 1.5 l Water + Roots + Zym + Bloom + Green Sensation + Sugar Royal (1 + 1 + 5 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 50 cm. Mars Hydro Fan kit Setting 6, don't need more for the moment, no smeel out of the tent. Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - Deep Jealousy Auto🌲🌲 https://anesiaseeds.com/product/deep-jealousy-auto/

Hello Guys ! Hope you are doing well. If needed find the tutorial of the topping and bending in the videos. What a week for the plant ! huge changes ! you can check all the tutorials into my IG channel : Sawyer_grow First I started the week by topping her. the idea it to let the plant focus on the current 8 colas she already grown. I gave her 3 days to recover then bending the main colas and did some LST to perfect the mainlining. for this grow I changed a bit my tools instead of using some holes in the pot I put some bamboo stick in it with rubber. Hope you like it. now she enter a full week of break. Take care all see you next week.

This week shows a lot of stem growth as well as the presence of some clones! Too excited about how big the girls are getting have a feeling they are going to be getting bigger at a fast rate at this point. I am still keeping them on the same nutrient and light schedule at the moment. I have a lot more pictures and videos this week because lets be honest I am still getting the hang of this thang!

This week was amazing guys. I literally watched the buds getting fat day by day. I am still feeding with a similar program and adding Aptus Regulator once per week to boost silica and some other minerals like molybdenum and boron. I'm flowering my plants in a hot environment with CO2 boost. PPFD is high to support these settings and thankfully my the pots aren't getting hot. No fungus gnats or any other pests, no root rot and bad smell. Everything is perfectly neat and buds are exploding. My expectations from this harvest is really high and I'll keep adding CO2 for another week. Some fellow growers asked for CO2 and PPFD measurements. I am sharing these information on this week's pictures. I got my CO2 meter fixed and I tested the CO2 PPM in different places of the canopy. Typical value for this grow tent with this CO2 setup is around 1100-1350. Temperature is fluctuating between 28-31 and the average PPFD on the bud sites is 1100 micro moles. I'm sharing CO2 measurements right under the fan, where you expect it to show the lowest value. Then I'll also share the CO2 PPM value coming out from the air pipe, which is normally attached to the grill of the fan. Direct output is now around 5500PPM and in the first two days, the meter shows 10000PPM which is the max value that it can reads. This bucket yeast CO2 reactor lasts for four days and I'm refreshing the mixture twice a week. This is huge CO2 with a fairly low cost compared to propane burners or CO2 tubes. Edit: I refreshed the CO2 bucket today and got you guys a video of the direct output. The system is outputting more than 10000PPM of CO2 and the meter can't measure it for the first two days. This CO2 method is a killer one for tent grows. Very low cost for very high CO2 concentrations. Hope these information helps. Happy growing 💪

The plant grew well without much problem. The arm that got broken was completely healthy this week. Nugs getting fatter ;)

Boy u can tell it’s close to Christmas cause she. Frosty lmao. But I’m push her another week before flush. I really haven’t had any issues with. Her no sickness. No nothing

day 50 - everything going OK. im using only water right now. day 52 - today I was in the local Grover's store where I was given a trial package of supplements 10 grams of powder feeding PK Booster. so today will be the first day of irrigation using PK Booster. dosage is 0.25 g per 1 liter - total ppm 140. (pure water ppm is 70) day 54 - another defoliation

week 5.. Use a portable air conditioner, add a co2 bag to under the light because use heat to melt the gas inside. Co2 weighs more than air, it will be fall down below. {Activities} (Day 29) Use the nutrients. (Day 30) Turn on a portable air conditioner (Day 31) Watered (Day 32) n/a (Day 33) Add a co2 bag and watered (Day 34) n/a (Day 35) Watered (Hope you like and enjoy my diary) Thank you so much for checking out my grows. Feel free to leave a comment, push the like or give the follow.

Getting bigger and bigger. Like really big. She’s ... like ... 27 inches high ! Do you people think that it will be bad for her blooming ?

19/05/2021 la mattina dopo aver lollipoppato ho trovato le teste delle apicali tutte a curvate verso giù credo sia dovuto allo stress..... oggi andrò a visionare se si sono riprese dal stress dubito proverò a risolvere l overfert alzando tutta la lampada in cima al box(poca luce=poco mangiare) per 4 giorni.... e cercherò di guardare un po le radici delle baby perchè ho il sospetto che l overfert si un conseguenza di troppa irrigazione d acqua.... se cosi non fosse credo che laverò il terreno tutte le mie bimbe sperando iniziano a schiarirsi un po dal quel verde scuro altrimenti niente fioritura.... restate connessi 21/05/2021 ho alzato la lampada a 90cm per farle riprendere dal forte stress lo tenuta cosi per 48 ore... andrò il 24 a vedere cosa e successo...

Man sieht es der instabilen Pflanze leider an… die blütenbildung ist sehr schlecht, die restlichen Triebe lasse ich trotzdem bis zum Ende dran mal schauen was draus wird…

шишка с новой причёской! появился хороший запах,и так как системный блок дует на шишку,а завехрения воздуха направлены на монитор-запах просто потресающий,обожаю как пахнет растишка)

To say she stunted I'm so very much surprised at this lady she smells beautiful and looks beautiful 😍, canna wait for her to mature nicely ❤️, happy growing and stay green ✌️ 💚 👌

Most of them made it only 1 six shooter definitely didnt make it and a cream cookies is a lil stuck. I threw a mexican airlines in the old six shooter cup but just letting it germinate in the soil I havnt done that in a while. They are going to get another feed tmm. The medium is a 50/50 coco/soil mix since I'm using the green buzz and its organic I figured a little soil might be beneficial. Day 7 from germination they should be ready to go into their final pots in the next few days.

So this is how things are looking for the ladies at the end of Week 3 of Veg. I have uploaded a video for you guys with all the information you need, any questions just ask away 👍🏾🔥😎

Autumn is coming, and the temperature has dropped significantly, reaching just 14°C during the day and 9°C at night. 🍂🍂🍂🍁🍁🍁

​📝 Mes impressions finales ​Quantité vs Qualité : Je vais être honnête, même si les têtes sont bien denses, la quantité n'est pas tout à fait au rendez-vous. C'est un peu mieux que sa petite sœur, mais pour moi, une plante doit approcher les 100g sec pour vraiment valoir le temps investi. La Cherry Cola semble privilégier la résine au rendement. ​Aspect : C'est une merveille visuelle. Les têtes sont d'une beauté rare, totalement recouvertes de trichomes en masse, on dirait qu'elles ont été plongées dans le sucre. ​Odeur : C'est extrêmement fort ! Un parfum lourd, sucré et épicé qui embaume tout l'espace. ​Note provisoire : 8/10. J'espère maintenant que l'effet sera à la hauteur de cette production de résine incroyable. ​🙏 Remerciements ​Cette aventure n'aurait pas été la même sans vous. Avant de passer au test final une fois le séchage terminé, je voulais dire un grand merci à toutes les personnes qui ont suivi le parcours de cette plante, turn après turn, photo après photo. Vos conseils et votre présence font toute la différence. ​Un merci tout particulier à @mia_biotabs pour le soutien et les produits qui ont permis de sortir une qualité de résine pareille ! ​On se retrouve très bientôt pour le résultat final!