Too early to cut the plant on the left but on monday zac zac

hello some news on vegetation day 22, start the bio grow, and bend the four Lateral head, and crap when i bend a stem has cracked but she is not cut I straighten them with a piece of iron she can go back. 😀👍

Plants have now been given their second dry feed. This greenhouse bio feed is very good. The plants are loving it. Now scrogged and defoliated and put onto 12 hour schedule. Fingers crossed lets wait for flowers. No issues so far!

Indoor bubatz gemütlich am blühen... die woche war im wachstum eher nix los... bisschen entlaubt und weiter wachsen lassen...schöne blüten verteilung... alles im rahmen ohne was zu meckern..schöne pflanze

Iniciando la tercera seman, buen aspecto

Beautiful flower full of trichomes. Smell and test fantastic. Very fast flowering. She was done on day 49 but I cut her down few days later. I love the strain, the only thing that I will like this strain to have is a better yield. Beast quality buds I ever grew.

14th day from planting. Calmag also, A+B up to 450ppm. The problem with the air temperature in the box has not yet been resolved.

Iniziò fioritura,.oggi 2 agosto, secondo giorno a 12 ore...dopo aver sofferto anche lei 3 mesi dentro AD un vaso da un litro... adesso con questo vaso da 11 dovrei riuscire a portarla. A maturazione,,,💪😂

Hello Diary, Purple Lemonade has reached its fifth week of flowering, I am now very close to harvest. I would say one more week and it will be ready for cutting. The appearance of Purple Lemonade is amazing and it would be a shame not to take a picture of her on a black background now that it is the grand finale. The flowers are hard to the touch, sticky and full of trichomes. Especially the main cola which looks impressive. This week I started checking the trichomes with a microscope and so far they are still transparent. The smell is very intense at this stage, the whole room smells of plants when I open the grow box. Watering is still every two or three days. This week I stopped adding nutrients, I just lower the p.H. to 6.0 and water the plants with clean water. Here is what the previous week looked like. 13/09/2024 - Day 51. Watering. I prepared 9 liters of water, lowered the p.H. at 6.0 and I watered all three plants on the farm with that amount. 16/09/2024 - Day 54. Watering. I repeated the same procedure as three days earlier. 18/09/2024 - Day 56. It's the end of the 8th week, taking pictures of the plants. That's all from me for this week, see you soon and thank you all for your support.

🎃👹👽MONSTERCROPPING RED MANDARINE 👽👹🎃 ____________________________________________________________________________________ 💀 12.3 ... 💀 13.3 ... 💀 14.3 ... 💀 15.3 ... 💀 16.3 ... 💀 17.3 I have not forgotten about this beauty, but it was too downtown to constantly move it to take pictures. But I am attaching the last photos, before cutting (and certainly some other macro) on like this! yeah! 💀 18.3 ____________________________________________________________________________________________ 📜👀 A look at the details of what I'm growing 👀📜 🍊💚 Red Mandarine F1 🍊💚 by 🌱🍭 Sweet Seeds 🍭🌱 📋 Details ⚧ Gender ▪️ Feminised ➰ Genes ▪️ 55% Indica / 45% Sativa 🎄 Genetics ▪️ Red Poison Auto (SWS39) хCalifornia Orange x Skunk hybrid) 🚜Harvest ▪️ 400 - 500 g / m² 🌷Flowering ▪️ 49 - 63 days ✨THC ▪️ 16% ✅CBD ▪️ 0,2% 🏡Room Type ▪️ Indoor 🌄Room Type ▪️ Outdoor 🕋Room Type ▪️ N/D 🎂Release Year ▪️ 2019 __________________________________________________________________________ 👀📷🥇 Follow the best photos on Instagram 🥇📷👀 https://www.instagram.com/dreamit420/ 🔻🔻🔻Leave a comment with your opinions if you pass by here🔻🔻🔻 🤟🤗💚Thanks and Enjoy growth 💚🤗🤟

This week went ok, but I did break two of the four tops early in the week. They have both recovered but it slowed me down a few days. I got the final four toppings done today on day 49, so I will probably give them two or three weeks and see where they're at, and hopefully be about ready to flip to flower. Not much left to do from here, just a little LST on the 8 tops to spread them out, and then just sit back and watch them grow. Thanks for stopping by, be safe and Blaze On!

Finally got my buddy to come out and add in a 20 amp outlet so I can fire up a better light. Still using quantum boards but with a 4500k spectrum. Got in a foliar with the Growzyme from green buzz liquids. Fed them right before I took the pics they look a little sad but hopefully they bounce back quickly. Not much else going on. The code bangdang will get you discounts at.. Gorillagrowtent.com Rainsciencegrowbags.com KindLEDgrowlights.com and more (see Instagram Bio for @bangdangbuds) Also check out my Instagram if your interested in entering a giveaway for a green buzz liquids starter kit including some living organics, fast plants spray and some seeds of the winner choice.

That’s genetics just surprise me! They got a very great beginning!

7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.

This week will be the last one for these babies, already started flushing them with water. Plan to continue so for 2-3 more days until reach around 700-600 ppm and Bob is your uncle. It was my first experience with auto flowering strains. It gives much less amount of products comparing to photo, but less stress as well, easy growing, plants are quite are unpretentious. Let's see how potent they will be.

23.09.23-85 дней этому растению . Она немного растянулась и я решил убрать пару больших листьев и немного подвязать , чтобы свет лучше проникал . На этой неделе я поднял ппм раствора до 1000 . Все девочки активно пьют и выглядят здоровыми . 26.09.23-88 день ) За эти 3 дня растение продолжило растяжку и прибавило около 8 см 😎😎 Шишки красиво формируются и на листьях уже виден Сахар . В планах на ближайшие дни провести легкую дефолиацию и добавить света . Всем мир 28.09.23- 60 дней вегетации и 30 дней цветения ! Растение продолжает медленную растяжку и прибавило 5 см за 2 дня , в остальном изменений нет . Завтра добавлю ей 120 w .

FINALLY STARTING THE PHOTOPERIODS AND I HOPE MY TIMING IS GOOD FOR CHOPPING THE AUTOFLOWERS..........SEEDS PUT INTO THE SOIL ON JUNE 22ND. SORRY TO EVERYONE WHO TRIES TALKING TO ME....I STILL CANT TALK TO ANYONE BECAUSE I TRIED CHANGING MY EMAIL ON HERE AND IT MESSED EVERYTHING UP. I CANT LIKE ANYTHING OR COMMENT ON ANYTHING. THE WORST IS I CANT JOIN CONTESTS STRIVE NUTRIENTS IS THE BEST IVE EVER USED. A MUST TRY AND I BUY IT MYSELF. GOT A SAMPLE LAST YEAR AND ITS SO GOOD I BOUGHT MORE. ITS A 2 PART POWDER NUTRIENT THAT DISSOLVES IN MINUTES AND YOU MIX THE SAME STRENGTH OF THE 2 PART NUTRIENTS FROM WEEK 2 UNTIL THEY ARE FINISHED (BESIDES THE FLUSH), NO MORE BULLSHIT OF SWITCHING TO BLOOM FERTILIZER. THATS MY FAVORITE THING BESIDES THE RESULTS. CHECK EM OUT AND BELIEVE EVERYTHING YOU READ BECAUSE ITS NO BULLSHIT, AWESOME FRIENDLY AND HONEST PEOPLE

Diese Woche sind meine Damen mehr und mehr der Reife näher gekommen. Sie haben sich trotz starker Startschwierigkeiten (Keller) gut erholt und doch einen immensen Schub hingelegt. Ich finde Sie grundlegend wunderschön diese Damen. Ich habe die Woche Komplett auf Dünger verzichtet und das Gießen leicht gesenkt da es mehr als ausreichend war. Die Luftfeuchtigkeit habe ich auf 40% gesetzt bzw. Reduziert. Etwas trockener um die Damen nicht noch zu gefährden. Ich muss wie auch zuvor erwähnen trotz alle negativen oder fraglichen Dinge zum LED bin ich mehr als überzeugt, beide der Mars Hydro LED. Ich freu mich über eure Kommentare und das ihr auch mir folgt oder gar einfach darüber das andere sich mein Hobby mit anschauen. Einen schönen 2 Advent euch allen.