The buds are very tight, but they didn't grow large colas so that means wasted time trimming cannabis, which I am not a huge fan of. I will not be growing this strain again, as I believe there are far better breeders and strains out there. I will continue to seek out the best breeders and strains until I am satisfied. I believe this Auto will yield in the 16-22 Ounce range dry, so I am not super disappointed, but I know I can do much better than this. After 6 days of drying, it took me around 7 hours to trim this auto, and she ended up yielding 16.72 Ounces. So she was definitely on the lower end of the spectrum from what I estimated on chop day, but still in the range. The buds are very tight, and smell like like cheese. I am only running one mature auto at a time now, so next up will be the Acid Dough from Ripper Seeds. I hope everyone has a great rest of your weekend, stay safe and Blaze On!!

No hiccups yet. Just pushing into flower.

Veg veg veg boring...I twisted and pinched the 2 new tops from topping and tied down a few with some plant tie downs...they are already starting to put off a flowering scent not just that green chlorophyll scent a actual flowery pungent hue in the air lol

The FBT5, a red strain sent to me by my welsh brother Z to the Pharma, this and the other one he sent me are gonna be my first red strains, though i was growing reds last time but i wasnt lol, so this is it, let's see how i do , hope they sprout ! I dipped these seeds overnight in water with a few drops of my specially made kelp extract and then I basically followed the RQS instructions for their propagator https://www.youtube.com/watch?v=gt1-geupkt8 comes with this brown powder... no idea what it is though lol ! well i was nervous it wasnt gonna sprout but it very well did on day 2 and had roots sticking out day three, gave her a tea spoon of water on day 3 and transplanted her on day 5. Let's see how the purple punch does ! 🚀

IM SLOWLY MOVING ALL THE PHOTOPERIODS INTO THE 8X8 TENT. THEY HAVE BEEN IN VEG FOR TOO LONG AND STARTING TO SHOW ROOT BOUND SYMPTOMS, SO IM HOPING I DIDNT WAIT TOO LONG TO FLOWER THEM🙏🙏🙏🤞🤞🤞 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

8/12 - Dropped 3 seeds into RO water to germinate 8/13 - Placed seeds into moist paper towel and into plastic bag to germinate on heat mat. 8/15 - All three seeds sprouted. In the morning I prepared three 3-gallon pots with Roots Organics Original Soil and Nature's Living Soil Autoflower mix. I will be doing Super Soil method for this grow. I filled the bottom one third of the pot with regular soil, then added 1 lb of Nature's Living soil and mixed it in. Then filled the rest of the pot with the regular soil. I topped it with Mosquito Bits for added BTI for pest prevention. Finally, I wet the pots down with RO water and Organic Black Strap Molasses. After about 8 hours, I planted the three seeds and placed them in the 4x5 tent with a humidity dome to keep in moisture. 8/16 - Two of the three already have their true leaves. So, I have removed the humidity domes from those two. 8/17 - The last of the GSCs have sprouted her true leaves so I have removed her dome. I sprayed them lightly again today with RO water and molasses.

👸🎂 Queen lizzies cake staying short like a bonzai lol, fattening up on the 4 main colas on 1 , I did some lst to keep apart the stems and defoilated the middle again as it was clogged up. Ended up snapping them abit but they took it like a boss! 😎

Son esquejes en hidroponía. Solamente agua con un poco de abonos, no añado aditivos. Después de 2 semanas en el Rainforest hago la transferencia hacia el sistema dwc. Es un sistema muy básico y muy eficaz.

week 6, i removed all the Internodes on the 5.5(I will mark the photos which is which) and lst on the 3 gallon pot(now four main colas). Temperature is the current temp outside, I do it by day just cause. There was a big storm and my plants loved it surprisingly, so tomorrow I’m going to drench the 3 gallon,which is dry again, in water to see if any more surge in growth happens. 3 gallon shows heavy prefñower I guess with pistils and the 5 gallon is alright

Raised lights Added clip fan blowing from above Defoliation

Week 1 - pretty straight forward

😶‍🌫️😶‍🌫️👏🏻👏🏻👏🏻

Wow this week was nerve-wracking. Her roots were well into the toilet part of the pot so it was time to remove all the soil and manipulate the roots for exposure later during the big reveal. Fingers crossed the makes it. Her being an auto it will stress her into flower but that's okay it's a cannabonsai they are supposed to be small. She still has a couple weeks of growth still so it will be just fine. The other plants in the shed are getting flipped to flower this weekend she I've put her in the tent with her sisters. Sorry about the blurple but hey.....it is what it is right?

Finishing off the first week of flowering and watching the buds grow :) All strains seem to be happy with with 1L water with 12ml nutes 25/75 veg/bloom each, every other day. Missed the defoliating deadline in veg mode but have done some very light defoliation this week, I should do more I know and will once flowering is a bit more established. A bit more LST, again on the careful side. The next grow will get the full treatment :) Of course things were going too well, a couple of hours ago while I was working on climate stabilization contra running costs (I got my first power bill since grow start) I noticed 100's of very small ants all carrying eggs exiting the base of my Gorilla Glue's airpot. I had been trying to work out why she in general seemed a bit laggy. Now I might have the reason, grabbed the Neem as 1st defense and gave what I could see a good spray. For those that I couldn't see and were probably munching on the root system and tunneling through the medium I added 4 tablespoons of fresh coffee grounds and 6ml of Wood Vinegar (pyroligneous acid) to 1L water and gave the Glue a soaking. This all happened just before lights out so now hopefully by lights on the ants will be gone and the Glue will start to perk up. Yesterday I flipped the switches on the LEDS to include deep and IR light to the spectrum. All in all a good week I think, any tips and advice always welcome :) *Update Gorilla Glue is looking much better 12h after the treatment for the ant infestation. Coffee grounds and wood vinegar, natural, safe, effective and cheap as well. I have Cinnamon as well now, so I'm well prepared for any future ant invasions :)

Lemon Haze Auto – Harvest Report 🍋🌿✂️ After a week of flushing, the Lemon Haze Auto was looking quite good and the trichomes showed me it was time. I decided to give her 50 hours of complete darkness before the chop and it really felt like the right move. 🌑✨ She was cut and hung up to dry, and after 9 days the buds were ready to be trimmed and jarred. The process went smoothly, and the final weight came out to 50g dry – not the biggest, but solid considering her smaller structure. 🌱💚 Now she’s curing, and I’m excited to see how the flavors and aromas will develop in the jars over the next few weeks. 🍋🔥

Después de dejar las plantas 1semana más de lo previsto ya estaban perfectas para cortar, una vez cortadas las manicure todas bien, me gusta manicurarlas cuando están acabadas de cortar porque tienen las hojas duras y me resulta más simple y me gusta más el resultado final. Después las tuve secando 2 semanas a 50% humedad. En el curado las pongo en botes de cristal herméticos y con bolsas de curado (Bóveda) que hacen que se mantengan la humedad perfecta sin necesidad de abrir los botes, después de 5 meses de curado ya no pude aguantar más y empecé con esta variedad, el olor cambio totalmente y tiene un sabor complejo a madera con tonos dulces y sabrosos,el humo es bien denso y blanco. Los cogollos están como piedras y con muy poca cantidad se estira muchísimo, en cuanto al efecto de primeras es energizante y dan ganas de hablar pero al poco rato se convierte en un fuerte efecto corporal que te deja en el sofá sin hacer nada aparte de dormir😵.

I went away on vacation to Utah for a week so I wasn't able to update my grow journal at all unfortunately . She really exploded while I was gone she's roughly 14"tall x 17"wide. She is starting to give off a nice dank smell I had the carbon filter off but I switch it back on. The tents humidity will drop back to 35-40RH% because of this. I also switched the bloom lights back on so the temp is also going to rise up higher than 75F during the day. My guess is at night the tent hits a low of 62F but averages around 65F. The co2 bag has some awesome growth and Its Cleary producing co2 because this lady is praying towards her lights ! I 100% recommend using c02 bag for sure even though most places online will say its useless. DAY 40- Added tomato cage to help support it ! it is two feet exactly as of today! *New time lapse* 2/10/20- Took 2 cuttings for clones, she is a cool plant and id like to keep her genetics alive for breeding projects this summer =) lollipoped the bottoms a bit and defoliated the lower fan leaves as well. Temp is back to 80F and 38RH% 2/11/20- Did absolutely nothing but admire this beauty today ;) 2/12/20- Watered with Recharge (double the strength), Cal Mag, and Mammoth P at 6.5 Ph 2/13/20-NFTG mis flower feed

Still in the HPS tent but now they are under the LED again and doing pretty well as the roots are filling the pots out they are eating faster. Did a couple foliar feeds with the Growzyme at less than 1 ML/Gal which they seem to like. Hoping to get a little more vertical growth before they kick into flower. Also been doing some bottom feeding which I have been experimenting with a little bit. It seems to increase rate of growth and the plants seem a little happier when I do a few feeds like that in a row. REMEMBER , IF YOUR SHOPPING FOR GEAR YOU CAN USE THE CODE “BANGDANG” FOR 10% OFF YOUR ENTIRE PURCHASE FROM ANY OF THE FOLLOWING COMPANIES. @greenbuzzliquids @rainscience_growbags @gorilla_grow_tent @growlightscience.led *****Gorilla grow tent discounts extend to all companies affiliated with grow strong industries which include..***** @super.closet Lotus Nutrients Kind LED grow lights

I haven't trimmed or dried the buds yet so I am looking forward to see the end results and updating my diary soon. Update: 240g of dry bud weight, not bad at all. I think the light helped a lot and should the issue of lockout not occurred half way through the growth then I'd reckon it would have been a lot bigger. Never the less, a great high and couch relaxing adventure. Mint and outdoor smell to it nice taste and denser buds now dried