The og and moby dick xxl is fast grow plant the color is very beautiful like green smerald. I hope this plant whit the big po will revitalize becouse the soil didn’t come in time!the delivery was late of one week!

Habe die Pflanzen wieder etwas Entlaubt und ein zwei Triebe entfernt.

Comenzando lst día 15

Nearing the end for the CBD crack. very few heads, rock solid buds and smell. Just what I like. The BDM has gone crazy with lots of little buds even though I did EXACTLY the same training on her. Crazy, huh? Given them each a HEAVY dose of PK and Bio/PK and anticipating 10-14 days left in CBD C and about 2-3 weeks left in the BDM. She hasn't started hardening up yet, whereas the CBD C has.

The Sucker Punch Autos had some nice growth in their third week. I gave them a very low dose of nutrients with their last watering this week for the first time and they seemed to have enjoyed it.

Entretien classique plus fragilisation de l’apex. Une bonne croissance et un bon espace inter nodale.

* ******* Week 10 - June 13 to 19, 2020 - Days 64 to 70 from germination ********** * She is getting really close to harvest......around day 77??? into darkness next week I suspect. She has been awesome but the damn pH has total screwed with the yield though as she couldn’t get the potassium she wanted to fatten up some more in weeks 9 and 10. They are going to be very sticky buds but the size will not be as big as if the pH had stayed in 6.1 to 6.4 range through flower......running mid 7’s is too damn high. Looking more into unfiltered tap water as another issue this run..........dechlorinated but not filtered........ More info to come.......getting pictures added in for now. Little more detail: June 13 - Day 64 - 👍

I'm excited for the Purple Lemonade FF she is stretching and growing nicely. Today she was fed a good serving of Goldleaf feterlizer, IBex Catapult to boost the development and cal-mag to help with any issue.

Little nitro def

They gettin fat

Day 1 - Popped into glass of water. Will leave in dark warm place for 24-48 hrs till they sink. Day 2 - seed sank, now decided to place in paper towel, in a bag in the cupboard. Will wait 24 hrs for tap root to emerge and to 2-3cm this time. Day 3- transplanted into final 3gal fabric pot. Water only pH balanced. Day 6- still nothing to see, first time using fast buds... But the name is not doing this seed justice 🤦‍♂️🤣 hopefully she'll break through by end of weekend 🙌✌️💚 Day 10 still no sign of her. Marking it as failed to germ 🤦‍♂️💚

Hey guys! Another week and another update! At the end of this week I decided to finally start with the main lining and I won't lie... I was extremely nervous haha 😱 but I believe I did it well, without any major issue! I also decided to move the small 4th plant into a new home and it seems she will like the extra space! This week I also didn't feed my babies as I over watered them 😞 but they still showed some great progress! So I suppose it wasn't that bad! 😊 Soon I'll update the next week, which is also ready and has even more timelapses! Thanks everyone! :D

47.nap A elkezdtem finomat adni nekik Hesi tnt 10ml 10l víz Hesi supervit 2csep 10l víz Plagorn alga bloom 2.5ml 10l víz Ph 5.8 Mint este esövizzel premezem őket imádják! Ezek a tápok hihetetlenül működnek kis mértékben is! 2hetente fogom 0.7ml növelti a tápanyagokat Holnap kapnak neem olajat permetezve 2ml 0.5l víz

Start of Week 9 🙌 I plan to use fertilizer for bud growth from day 64 to day 70+... depending on when the harvest time occurs 😉😄👍 Started working with fertilizer today, every 2 days a mixture of 10ml per liter as long as the buds have not properly developed trichomes 😵 I hope this works 😵😲😱 Day 68 with fertilizer again

Hi everyone 🤗. Welcome to a new diary. Cuttings were cut and rooted last week 🙂. Today they were placed in 11 pots in Canna Coco Proffesional +. Green Buzz Liquids is used for the fertilizer 😀👍. Made in Germany 🤗. I looked at the compositions of the individual elements and I am very impressed and excited about him 😎. Greetings go out to Green Buzz Liqudis, and a big thank you for the support 🙏🏻👍. Which training methods I will use will be decided spontaneously each day 😃. I wish you a lot of fun with the diary, stay healthy l and let it grow 🌱. You can buy this Strain at https://thecaliconnection.com/original-sour-diesel.html You can buy this Nutrients at https://greenbuzzliquids.com/ Type: Original Sour Diesel ( Clone ) ☝️🏼 Genetics: Fem seeds- Original Sour Diesel to Original Sour Diesel BX3 RVSD Male Reg seeds- Original Sour Diesel x Original Sour Diesel BX3 Male 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 - 0.4 EC. Add Cal / Mag 2 ml per l water every 2 waterings . Ph with Organic Ph - Pulver to 5.8 .

11.05.2023-предпоследняя неделя для ананасового экспресса . Шишки отлично набрали вес и она стала пить меньше воды . Перехожу на 10 дней рипена, 2 дня засухи и темноты .

LSD Zamnesia Tripping 🙂 | Fresh Frozen, Ice Water & Temple Balls — Week 16 From Seed First of all… Yes 😄 We are once again dividing the harvest reports into multiple chapters, and once again we apologize for that. But honestly, there was simply no way to fit: * harvest, * drying, * trimming, * curing, * smoke review, * macro photography, * fresh frozen work, * washing, * extraction, * and hash making… …into a single GrowDiaries update without rushing through important parts of the process. And this part? This part deserved its own spotlight completely. Because this week was not about flower anymore. This week was about resin. Living resin. Fresh frozen material. Ice water extraction. Patience. Cold temperatures. Sticky hands. And slowly transforming trichomes into beautiful hash. For everyone joining only now, quick recap: These LSD girls were grown under 12/12 from seed from the very beginning. Minimal training, mostly natural structure, gentle leaf manipulation, and environmental balance instead of aggressive intervention. Part of the harvest was dried traditionally and already covered in the previous report. But another part… …never got dried at all. Straight during harvest, selected flowers were removed fresh from the plants and immediately vacuum sealed before going directly into the freezer. No drying. No curing. No waiting. Fresh frozen. And that changes everything. The goal here is preservation. When flowers are frozen immediately after harvest, a large portion of the volatile compounds: * terpenes, * flavonoids, * aromatic compounds, * and delicate resin characteristics… …can remain much closer to their living state compared to traditionally dried material. This is why fresh frozen extraction became so respected in modern hash making. It captures a version of the plant that only exists for a very short moment in time. Alive. Wet. Fresh. Fully expressed. And honestly? Opening those frozen bags weeks later felt like reopening harvest day itself 😄 The flowers still looked incredibly resinous even after sitting frozen for weeks waiting for wash day. Now let’s talk process. For the wash itself, we used the Bubbleator machine courtesy of Zamnesia , and honestly huge thanks to them for providing it. They knew I wanted to start exploring ice water extraction properly, and they were kind enough to support the journey. The setup itself is actually beautifully simple. First: ice. Lots of ice 😄 The machine was filled partially with ice first before adding the fresh frozen material inside the working bag. The flowers themselves were placed inside a closed 220-micron washing bag. This is important because the bag keeps the plant material contained while still allowing the trichome heads to separate during agitation. After placing the material inside: * more ice on top, * cold water added, * everything submerged, * and then… …we waited. Around 30 minutes or so. And this step is actually extremely important. A lot of people think washing starts when the machine turns on. But honestly? The wash starts before that. This resting phase allows the frozen material to: * slowly rehydrate, * absorb water again, * become fully saturated, * and most importantly… * become extremely cold throughout the entire plant material. Why does this matter? Because trichomes become brittle at very cold temperatures. The colder everything gets: * the easier the resin heads separate, * the cleaner the release becomes, * and the less physical force is required. That is also why ice exists under and above the material: * lower temperatures evenly, * protect the resin, * and maintain the cold environment throughout the wash. Once the water temperature approached near freezing… …the machine came alive 😄 And honestly? Watching the water slowly transform during the wash is always magical. At first: just ice, water, and flowers. Then slowly: foam, cloudiness, resin separation, and finally that beautiful milky golden water hash makers love seeing appear. Meanwhile on the side, we prepared the filter bags. We did not use every single micron separation individually because honestly sometimes over-separating becomes unnecessary depending on goals and material quality. Instead, we focused on collecting the grades we actually wanted to work with and enjoy. And then came one of the most satisfying parts of the entire process: Collection 😄 Slowly lifting the bags. Watching the resin gather. Carefully scraping. Separating grades. Observing texture and color differences. Beautiful creamy resin everywhere. Some lighter. Some slightly darker. Some sandy. Some greasy. Every layer carrying slightly different characteristics. After collection, the resin was carefully freeze-dried. And this part also requires patience. First freeze drying. Then breaking it apart. Then more drying. Then more waiting 😄 Depending on environment and conditions, full drying can take several days because trapped moisture inside hash is dangerous long term. Rushing this step can ruin months of work later. In this case, the process stretched closer to about a week before everything felt properly stable and ready to work. And honestly… This is where the magic really started. Once dry enough, we allowed the hash to rest briefly before beginning the hand-working process. No extreme heat. No giant pressure. No fancy machinery. Just: room temperature, body warmth, gentle pressure, folding, rolling, stretching, and patience. The room itself stayed around 15°C, which turned out to be perfect for working the resin slowly without overheating it. And this step matters far more than many people realize. When hand-working hash properly: * oils redistribute, * compounds begin merging, * terpenes spread through the material, * oxidation starts slowly, * texture evolves, * and curing begins transforming the resin itself over time. You are not simply “rolling hash.” You are starting a living curing process. And slowly… The texture changed completely. From sandy loose resin… to creamy material… to sticky dough… to smooth beautiful temple balls. Honestly, seeing that transformation happen in your hands never gets old 😄 Final result? Three temple balls total: * two smaller ones from smaller micron collections, * and one large main temple ball that became the true star of the session. Final weight: 46.5 grams.( big one ) And honestly? I was extremely happy with that result. Especially considering the quality, texture, color, and how beautifully this LSD washed overall. Once formed, the temple balls were wrapped carefully in parchment paper before being vacuum sealed for long-term curing. And now? They rest. Months. Maybe longer. Waiting. Because the goal here is not “fresh hash.” The goal is evolution. Traditional temple ball style curing allows: * oils to redistribute, * compounds to merge, * texture to transform, * aroma to deepen, * and the entire resin profile to mature over time. Almost like aging wine. Or curing cheese. Or fermenting traditional products slowly and intentionally. This is medicine with patience built into the process. And honestly… That part alone deserves respect. We also included: * detailed process photos, * collection stages, * macro photography, * texture closeups, * curing progression, * and multiple stacked macro images showing the resin in insane detail. Some of these stacks reached: * 62 frames, * 87 frames, * 114 frames, * and even 152-frame focus stacks. Because honestly, hash under macro magnification becomes another universe completely. The textures stop looking real. Tiny resin mountains. Oil rivers. Micro-crystals. Glossy surfaces. Soft creamy structures. It almost starts looking geological instead of botanical 😄 Mr. Baggy of course supervised the entire operation like the professional resin inspector he clearly believes he is. And next week… The final chapter arrives. Smoke review. Curing review. Flower review. Hash review. Terpene evolution. Effects. Textures. Lessons learned. Mistakes made. And final thoughts after this entire LSD journey from seed to cured medicine. And finally… Thank you. To Zamnesia for the genetics and the Bubbleator. To Plagron. To F.O.G. To all the LEDs, gear, and equipment involved. To GrowDiaries. To the community. To the OG followers. To the new curious visitors. To the silent supporters. To the skeptics. To the lovers and even the haters 😄 To everyone spending time sharing this strange beautiful plant journey with us. Wishing everyone: cold water, sticky fingers, healthy plants, beautiful resin, and enough patience to let good hash become great hash 🌱