day 58: trichomes are 100% clear. still a few weeks before harvest

They are growing very well, and I have bend them quite a lot. Made some mistakes and break some branches like 2/3 on each...I put some rubber tape on them hoping it will go on, but I got a good feeling for that. They got a nice shape and are just getting some signes of flowering. I have also cut like 2 or 3 Big leaves by plant, i Hope it'll be ok for them.

She is putting all her effort in growing two long and three little branches. I turned her a bit more towards the sun and out of the shade of her neighbour plant. As the weather is great, she needs more water now.

Ok so I'm a couple of days later with posting, though the images are of last Friday. They went full into flowering. At the same time, 3 of the 4 have some weird growth going on. Deeply ridged leaves, a bit springy plants. I raised the lights cause I also saw white points and other leaf burn. I have to get used to the nitro-fueled energy of these thoroughbreds and the 'on the edge' style of growing that autos deliver, as a mostly photoperiod grower, this is both exiting as well as a bit out of control in the style of a rollercoaster, once you get on - you have to do the ride. All in all amazed with the vigor, though clearly, the XLs outperformed the Forbiddens in growth. I have so many conditions going on, however, that all will be too close to call for now and in the long run my results will have been tainted by my experimenting and finding all optimal with these rocket-style plants. I'm amazed at this growth as Jack must have been when popping his magic beans. Still, they keep developing and power through with bud formation. I have to watch these lights, the SP 3000 by Mars Hydro is so powerful, that also getting this light optimal is a whole learning curve, but it does deliver a punch. I think I overdid the amendments at the start with the blood meal and that's why I see ridging so I'm careful with the Nitrogen and give them lots of fresh water with just some topmax in between. They seem to hold out but its on the edge. As far as bending, after the initial bend, I saw many branches develop that are nicely outward, tucked some leaves but I'm happy with the shape of the plant and will let the center bud develop. Take care and see you next week! Thanks for visiting!

I mean this genetics it's excellent ... if I would grow zombie kush again ... good job ripper seed ... she fought and was very strong against the plagues after a beginning outdoors ... she fought against the white fly. worms .. red spider and other insects ... and deserves your recognition ... it will not be the most beautiful plant with its leaves impeccable ... but she is a champion ... thank you ripper seed .. .

Ciao a tutti oggi 3/06/2022 è il primo giorno di vita della pianta ✌️🏼✌️🏼 Buon seguimento 😝😝

Last week for Studio & Rainbow Gelato Will chop the S54 today, RG has 3/4 days left Studio ist really beautiful, it looks like bought cali buds - really proud that she turned out that way RG is not pretty at all in my opinion maybe I screwed her up somehow, all leafs look health except the browned ones in the middle tops In her edges are no discolored leafs Bruce Banner fills its gaps, I moved the light to the back so she gets more I already started flushing her + 2 weeks overdrive before that - wasn’t so smart cause she takes longer in general - avoidable mistake All in all happy they turned out like that

Right from the bat this strain was awesome, I would recommend potting up these plants or just keeping in a smaller container, they really really like to be in a small pot. I have another clone of the big pheno in flower now in a 1gal with coco and she is taking off like crazy.

Susquihanna @Divine Seeds Candy Auto continues to stretch one and a half inches this week while flowering and has a ton of buds. We have had the best temperatures this week. It is in the 80s and is going to rain all week. We now have a hurricane or two- literally- heading this way. I only fed my candy auto once this week because it was so wet here. Miss candy auto got nature’s best, rainwater. I clipped a bud off and took some close-up pictures so you could see the differences one week makes from last week, I love seeing the “sugar“ on the cannabis buds. Take a look at the sparkle – candy sugar, for sure exclamation exclamation And, as always Find Your Happy:)

Die Ente hat sich relativ einfach gestaltet da ich nur Blätter abgeschnitten habe die kein Harz Besatz hatten. Die anderen zuckerblätter wenn sie trocken sind da es einfacher ist und sich so auch die Blüten schöner beschneiden lassen ich freue mich schon darauf. Mein erster Grow mit Divine Seeds Genetik macht Lust auf mehr!

Ho regolato il dimmer della lampada al 100% e distanza 30cm perché si sono allungate troppo i primi giorni. Continuo ad annaffiare solo con acqua ogni giorno con l’aiuto di uno spruzzino

Showing some color now. Smelling good in there. this is basically week 6 now, (i missed a week) and is getting more GP3 BLOOM, I did finally get in to do somewhat of a defoliation

Monaco - Nine Weeks Harvest Day 108 🚿 Watered her every second day with 2L of RO tap water, with defined nutrients, mixed individually in order and then pH'd to 6.3. From this week, I will gradually start to reduce her nutrients levels until she is receiving just plain water - she will be flushed for at least ten days before harvest. ✂️ I removed a couple of sugar leaves from around the flower at the top canopy to improve light penetration to help her mature 💪🏻 🌸 Shes into week 8 of bloom and she is just focusing on maturing her flower, which means it's time to prepare her for harvest.🍂 On inspection, her pistils have mostly turned amber with white pistils appearing from newer growth and her trichomes are all milky clear. Her cone shaped cola have taken on autumnal colours, with deep purples and blues popping from under the shimmer of the dense trichome coverage. Her aroma is also very present, with strong fruity and gas notes with undertones of spices! The goals for these final few days is to get her flushed and remove all unnecessary foliage as well as regular inspecting her for maturity levels, but also molds and pests. All good so far 🙏🏻

In the end I’m very happy how this first Grow went. Tomorrow I’m gonna finish the other half and update some pictures. Curing begins now, can’t wait to smell and taste the full cured terpens! 😋🌱

Bueno, para no perder a nadie, el sistema que manejo es con dos indoors en paralelo. Uno en flora y otro creciendo la madre. A la madre la hago crecer hasta sacarle esquejes. Luego pasan al otro indoor, la madre y los esquejes, y ahí comienza la floración. Y ahí mismo comienza la nueva madre en el indoor pequeño. La variedad es de un banco argentino que no sé si sigue existiendo. Se llama "kali seeds" y la variedad es superhaze. Que en teoría tiene unas 10 semanas de floración. Día 01. Puse la planta para obligarme a terminar el prototipo. En este caso decidí usar madera de palets y algunas otras cosas que encontré en la calle. Ya casi termino todo, pero me falta armar los cierres. No voy a hacer puertas, dado que no está centrado, así que uso una tela de microfibra que ayuda a opacar mucho y era mas barata que el blackout. Ademas es impermeable y me sirve para un nuevo mecanismo de seguridad para fugas que quiero implementar. Es bastante simple, pero me soluciona mucho. Hoy no hay mucho más que mostrar. Cuando lo haya terminado voy a ir mostrando como va quedando. No me voy a enroscar con los tsp. Voy a poner lo que use aca. Ahora puse un litro de agua con un poco menos de 1g. de Feeding Grow de Greenhouse. Al menos por ahora, ya que tengo que comprar medidores porque los míos ya no dan confianza. Día 4. Ya estoy terminando de acomodar el indoor. Lo forré con refractario e instalé las "puertas" que en realidad son telas tipo blackout, pero mucho más finitas. Me falta terminar de ordenar la electricidad para que cada sector tenga su timer. Van a ser 3 timer diferentes. Por un lado van a ir luces y ventilaciones de flora (12hs). Por otro lado bombas de aire, bomba de agua y probablemente vientos de floración (15 min/hr). Y por último luz y ventilación del modulo de madres (18hs). Hice el cambio del depósito, a uno de 5 litros, ya que los próximos 10 dias pienso intentar mantener la misma solución (mantuve la proporción 1g/L de feeding grow). La planta tuvo un ataque de una plaga que fue a sus primeras hojas. Por suerte en el momento puse tierra de diatomeas y parece haberse detenido. Pero se pueden ver los amarillos en las puntas. No me preocupa, dado que en hidroponia esos problemas se resuelven y la planta se recobra enseguida. Ahora igual habrá que ir monitoreando, dado que me había olvidado de desinfectar el indoor, cosa que hice luego de este ataque. Tengo fé que llegando al mes y medio de crecimiento, ya esté en condiciones de cortar unos esquejes. Día 07. Por el momento el crecimiento viene rápido cómo suele ser en hidroponia. En unos días le voy a estar haciendo el corte apical. La ansiedad me viene ganando, pero sigo con fé. Esta semana tengo que comprar un par de aditivos y medidores que me están faltando. Pero ya está todo encaminado.

Buenas, hoy subo mi primera semana con las Juan Herer! Me siento muy emocionado, este es mi primer cultivo de exterior. El cultivo lo empiezo en interior y para fin de septiembre lo trasplanto afuera directamente en la tierra. A ambas plantas le puse un nombre particular, #1 Gina Herer, #2 Juana Herer.

Día 64 (17/03) Riego con 500 ml H2O EC 0,45 Estamos en el día 36 de floración y empieza a mostrar una senescencia preciosa 😍💥 Día 65 (18/03) Riego con 500 ml H2O EC 0,45 Día 66 (19/03) Dia 39 de floración y la senescencia empieza a avanzar en algunas hojas. Unos colores preciosos! Riego con 150 ml H2O EC 0,45 Día 67 (20/03) Riego con 500 ml H2O EC 0,45 Día 68 (21/03) Riego con 500 ml H2O EC 0,45 Día 69 (22/03) No riego (vacaciones) Día 70 (23/03) No riego (vacaciones) Queda 1 semana (teórica) para la cosecha! 🚀 FastBuds 15% DISCOUNT code "NONICK" 2fast4buds.com @fastbuds.official 💦 BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ @biotabs_official 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE @promixmitch @promixgrowers_unfiltered 💡2 x Mars Hydro FC1500 EVO Led Grow Light (2024 NEW FC 1500-EVO Samsung LM301H 150W LED) - https://marshydro.eu/products/fc1500-evo-led-grow-lights/ - https://www.amazon.de/dp/B0CSSGN5D8?ref=myi_title_dp

The pics and videos are from day 37 of flower. All 3 of these are starting to beef up a little bit, they have perfect bud structures. I'm picking up a creamy kinda vanilla smell on them each having slight variations but what do I know? I really want to grow all 3 phenos again sincenmy clone runs always seem to be just a little bit better. I said this on my last post but for anyone droppin questions in my DMs just comment on a journal I dont go thru the dms its alot of the same questions over and over. That way anyone can see the questions and responses and I'll try to do a better job at responding to comments as well. I always have so many diaries going at once I rarely stop and read them all until the very end when things slow down. Hope everyone had a happy halloween3👊

Week 20, week 10 of flower started 10/18 and the lights are now off until next run! I'll be cutting them down later tonight! So blessed to have gotten this far! I'm at a loss for words after that, happy growing everyone ✌️🍀✌️ Harvest update to follow........