Keep watering with same nutrients mix, because I had add before to soil some extra worm castings, palm tree ash, bat guano and egg shells. Day 24. keep doing all the same feeding with 2.5L nutrients mix.

🌱 Day 29 - First Day of Flowering Phase 🌱 Hey everyone! 🌿 I'm super excited to finally enter the flowering phase of my first grow! I have to admit, I was quite surprised to see that the plant had already been in pre-flower for three days and are developing really well. 🌸 Current Conditions for the Flowering Phase: Watered today with 800ml + 1ml/L BioBizz Bloom 💧🌿 Humidity: 50-55% 💧 Light: 100% intensity, 50cm distance, 16 hours light, 8 hours dark 💡🌙 Current Issues: I'm dealing with a few small yellow spots on the leaves, which seem to be caused by a calcium and magnesium deficiency.

Week 18 Middle August : weather is changing. Return of heat and humidity: 28 degrees, a little bit rain. A heat wave is coming but near the ocean the maximum will be around 32 degrees. It’s good to grow in greenhouse during this period : -ventilation control: I adapted the rythme: for now it’s around 18h/24h intermittently -pests and diseases control: insect’s traps natural and artificial, less heat -humidity control: no rain problem Daylight 14h: 7h/21h Flowering time 😁. Healthy plant, beautiful green color, just a few yellow leaves on the base. More watering: 1,5L every 60 hours Same cocktail: Calmag (0,5ml/L)+ FloraGro (2ml/L), FloraMicro (2ml/L), FloraBloom (1ml/L) + Root booster + Cannazym Feeding soil with guano bat (NPK 3/6/10) for a slow dispersion + dried horn and blood (NOK 13/0/0) for nitrogen add. Protecting plant: sprayed Neem Oil, added diatomaceous earth on soil. I will make a defoliation soon.

Start of week 1 flowering. Growth is really amazing this week.

03/13/2022 Love the colors on Grape Skunk #1 others are not as purple, again i forgot Biscotti Skunk and lemon og. 03/14/2022 Uploading Biscotti Skunk pic's I'm really loving 3 particular girls this run,all plants are exposed to PW intentionally I need girls that can take PW with no issues and three plants are spotless. The first is the only Biscotti Skunk that was female of 5 cloning for outside run but will do great in basement without PW issues. The second is lemon og spotless, and the third is the grape skunk thats got most color the second tallest of the grape skunks, cloning for testing in New England zone 7 should get at least one if not all 3 to finish before cold sets in.

Hola amigos partiendo con la sexta semana, todas las nenas muestras claros signos de floración, se realizó la última defoliacion

Plants are growing very nicely! Strawberry Banana has really taken off! 3/12/22 Turned on Auto Pot system! Will wait a week or so before turning on Air Domes!

Que pasa familia, vamos con la sexta semana de floración de estas Wedding Cheesecake Fast Flowering, de FastBuds. Agradezco a Agrobeta todos los kits obtenidos de ellos 🙏. El ph se controla en 6.2 , la temperatura la tenemos entre 21/24 grados y la humedad ronda el 50%.Tienen un color espectacular, estan a 12-12, iremos viendo cómo avanzan. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

26.08.23- 51 день для сестричек северное сияние ✨ 1) Горшок 10 литров из проблем небольшой засол , который быстро устранен легким раствором , но пш корневой зоны ниже 5 хотя вход 6.5 ! Никак не могу понять почему кислый дренаж ? Подскажите в комментариях 2) Горшок 3 литра все отлично вход и выход одинаковы , малышка в горшке 3 литра опережает в развитии семтру на 1-2 недели визуально . Обе девочки цветут и не показывают признаков дефицита или блока веществ

By the end of week 3 both plants had 6 nodes and I topped both above node 4. Both plants were starting to grow rapidly and we watched for any slow down after topping. Started to use the Fox Farm nutrients. So far no issues. Plants really starting to grow. Watching how much water trying not to overwater. Lifting the pots when wet gives great reference to when water/feed is needed. Some time gaps in the photos uploaded...!

Just some slight bulking in the buds

Getting good temps and humidity , change the light to red and blues saw changes

Great climate, ideal. No problems to report, for the moment the critters are focused on something else. If it doesn't get too hot, I'll start reducing irrigation and defoliate more. Today 13.27 hours of light. My Gorilla is doing well, lots of flowers are forming although they are smaller than those in Special Kush # 1. Strong cheese smell. The supercropped twin branches will become one giant bud. August 19 update - Very initial mites infestation promptly treated with nettle macerate spray. August 21 update - first day of new heat wave

Hey guys :-) First of all I have to say that all 5 strains I have in the tent from Amsterdam Genetic are beautiful genetics 👍 . This week they were repotted into 8L fabric pots. When repotting, 2 g of Green House Powder Feeding Bio line were added per liter of substrate :-) . That's enough until the first flowers start 👍. Watering was done twice this week with 0.8 l each. Otherwise everything was cleaned and checked and fresh osmosis water was mixed. Stay healthy 🙏🏻💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 https://shop.greenhousefeeding.com/affiliate/MadeInGermany_PassionGrower 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.amsterdamgenetics.com/product/choco-cheesecake/ 👇🏼👇🏼👇🏼 Use the coupon code: madeingermany for 10% on all Amsterdam Genetics seeds Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany

Questa runtz layer cake è spettacolare.la adoro in tutto... buona di profumi ed effetto. Facile da coltivare e buona resa

Had to change the solution at day 4 because the Ph went up to 6.8 and I still don’t know why. And yes, I see… I need to learn how to make better photos. Got the info nearly every time when I upload. Ok.. ok.. :D

Waiting for first signs of life … While we are, I thought I’d give you a short explanation on the software’s graphics in case you did not follow my first diary. The one to the upper left, as its headline says, is the temperature graph. Most important line is the red one, showing the leaf temperature measured with an infrared temperature sensor. As there are no leaves yet, it is pointed towards one of the pot’s wall at soil level. Air temperature from a sensor that usually hangs around somewhere around top level is violet, and the grey line is the outside temperature close to the tent, helping the software to determine if a main blower action will effectively lower temperature. As I learned from the first grow a plant day that corresponds to the natural day can cause enormous gaps both to temperature and humidity, I inverted the plant day now, starting their night at 11 a.m. So after the first day temperature will only vary around 1.5 °C, which is of course due to the low light intensity too. Humidity graph on the upper right is quite crowded. Main line is the blue one, tent air humidity, which on this first day was between excellent 65 – 70% most of the time. For the moment humidifier is electrically disabled. There is quite some excess humidity on the tent floor and no reason to push this any further. Outside air humidity is grey again and taken from the same outside sensor that reports outside temperature. The soil humidity sensors are simple analogue capacitive sensors which have their flaws. I am interpolating their measurements to have a somewhat smoother reading, but as you can see from the turquoise humidifier reservoir reading (in legend named as plant soil hum 1), they can get confused when humidity is very high and start to report random numbers for some time. The most important graph for all growing stages is the lower left one, where the pink line meaning plant VPD should be inside the green optimum range for somewhat perfect conditions. This cannot be attained all of the time – dehumidifying isn’t as easy as humidifying –, but software tries its best to do so. Outside VPD is grey again. The last graph is more for amusement than anything else. The light intensity sensor is hard to position correctly, and everything you see about illumination and DLI (orange and green, plus grey for the accumulated 24 h DLI) should be taken with some spoonful of salt. Any resemblance to real world professional instrument readings can be considered purely coincidental. The violet line is the CO2 reading from such a sensor, and you can see that its tiny peaks correspond to even tinier black peaks at the bottom of the graph, reading TVOC values which in this case, once they will be more than possible measurement irregularities, can be interpreted as smell. ------- End of week 1: All seeds germinated. I wasn’t at home most of the time, and it turned out using the humidity sensor to monitor the humidifier’s tank wasn’t good for the stability of the system. Arduino crashed, so there are no pictures yet and no graphs to show. I have the feeling light was a bit low as the seedlings grew a bit tall, but with lights now up to 20% I guess this problem is fixed. More tomorrow when I have some more data to share. Even more end of week 1 (I extended this week to 9 days as I cannot tell when the seedlings started to show): Lights are at 40%, meaning 40 W in total. No reason to give them new water until next week. As some flies showed up from the BioBizz soil, I added 2 yellow cards. So far, everything in normal ranges. I’ll switch the control to grow phase soon which will raise the VPD slightly by 0.5 kPa. It’s interesting to see the CO2 level started to climb by 50% during their last night and has not come down to baseline afterwards. I restarted the app to check if the sensor had lost its calibration, but it still sits at around 660 ppm now.