The Grow Awards 2026 🏆
Likes
Comments
Share
@Lickey
Follow
The smell is insane and my carbon filter can’t handle it and wife is not happy. I am secretly happy. Plants are doing well. Water every 4 days or so. Just giving my last feeding at week 6… a little late. But just 1-2 tbsp of 284 power bloom from Gaia green and 1tsp of high P bat guano. Watering in kelp, cal mg, Herculean harvest… Going to be a decent harvest. 9 weeks or so from flip is what I expect. They are starting to flop over so I am lowering the trellis to catch some lower branches.
Likes
6
Share
@tiasmaaa
Follow
pretty happy, it takes much week because of the weather
Likes
12
Share
@Ziggs
Follow
I missed last week's diary but I did get these lady's transplanted last week and got the grow room all set up. I'm supper excited to start the training.
Likes
1
Share
@Ogchemst
Follow
First day in Flower! It's been... very interesting 2 weeks.. now that I survived tha, im having some lockout due to being unable to take care of my plants for the past 5 days and someone having no idea had to do the job, I'm not afraid of showing these mistakes I'm always looking forward to the outcome so I'm still having some hopes for this og kush, not everything here went as planned and that's why I want to focus on finishing up the grow and starting new ones, better ones as soon as possible, I will definitely never grow autos again as I'm just not a fan of them having to be on 18/6 schedule and I like having co trolley over my plants as sometimes things can go wrong. Og kush had a lockout after flush it grew beautiful but still ate up some of the upper leaves. Runtz.. yeah I like him he is a beautiful little bonsai he didn't get lockout too much but also did I'm looking forward to seeting the stretch on him if it so happens. Cherry gusher, a tiny pheno I got this time I'm looking forward to growing 4 next time and hunt down a pheno. They say outdoors you have to play with God and indoor you try to play God.. we are not perfect and that's why I'm looking forward to the finish line. Will i scrog? I have the net setup but I'm not sure if I will get enough stretch. Day 3 I noticed some light white spots on bottom leaves of the plant after a flush I did recently, I diagnose this as magnese or magnesium deficiency, I'm going to up the cal mag to 8 ml and a+b to 10ml per 5 L of water along with additives extra 0.5 ml just as a touch up. Also I noticed we are at 47cm at the tallest branch after topping and lst and this thing is an absolute bush.. I could probably hide behind it if I was a kid playing hide and seek!.
Likes
9
Share
@HashCakes
Follow
Another great week of growth. Started training down the main. Probably let her grow natural this coming week to see what I'm working with before doing more. Same regime but Watered twice this week. ****I will post this with every update. This was planted with 40 grams of real growers Grow Dots in 4 gallons of RG coco and 1 gallon of BAS 3.0 for an all in one amendment. ****
Processing
Likes
2
Share
@Ld966
Follow
Buds are now bulking up nicely and the smell is incredible cant stop smelling the beauty. Very please how its turning out now just the last 4 weeks left.
Likes
21
Share
@gr3g4l
Follow
la semana empieza con la poda de hojas abanico. y termina con doblado de ramas. La nº1 que sacó tres ramas por nudo va por libre, le cuesta más crecer y tengo que ir podando y doblando a medida que va creciendo. La nº2 y la nº3 ambas terminan la semana listas para despegar.
Likes
Comments
Share
Hi liebe Community and Welcome Back! 💚🌱 We proud to present the second Strain from Good Times Genetics! Die Jungpflanzen entwickeln sich prächtig und zeigen ein stabiles und gesundes Wachstum. Inzwischen lässt sich jedoch ein Unterschied im Wichsverhalten beobachten. Die einen legen etwas mehr an Performance zu, während andere Jungpflanzen noch etwas kleiner sind. Die Wachstumsbedingungen im Growzelt sind weiterhin am Optimum und Stabil: ——————— 🌞 Temp: 23°C 🌚 Temp: 20 °C 💨 RH: 58% VPD: 0,86 kPa 😎PPFD: 330 mqm ——————— Stay Tuned! 💚
Likes
120
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/15/22 😽💨 Week 4!! Everything is going great, all plants were defoliated on day 21 of flower and all growth on the bottom 1/3 removed, airflow couldn't be better now..all plants are fairly uniform but a couple are showing yellow on old growth, we've been very light on the nutrients and will try increasing their N slightly to see if this helps..beyond a few yellow leaves everything looks great! I read that this is a super long flowering strain and that looks like it might be the case, nodes have a good spacing and we're getting some awesome light penetration after thinning out the canopy..i think this will be a good yield ...Thanks for reading if you made it this far and happy harvests everyone!! ❤️💡🌱😽💨 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 1/20/22 Everything going pretty good, some of the older growth is beginning to wash out, we're already feeding a good amount so we'll attempt to lower the PH of the next feeding, thanks for dropping by, happy harvests everyone!! ❤️🌱 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~
Likes
47
Share
The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches desired% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.
Likes
33
Share
😶‍🌫️😶‍🌫️👏🏻👏🏻👏🏻
Likes
37
Share
Growing nicely! Second set of true leaves are forming, still only giving RO+Tap water to 160-180ppm Watering a bit more thoroughly instead of just the top inch. Got my sponsored setup too! Loving every bit of it! Thanks MarsHydro & AC Infinity ❤️❤️
Likes
17
Share
Day 16 week 3 of flowering. Wow this girl has really stretched!!! She is up against the light & I can't raise the light anymore as the fan & filter is above the light up against the roof. Had to super crop the tallest branch & have tried to open her up some more with some serious bending & tying down carefully as the stems split pretty easily. Defoliated her & some more lolliepoping, she is going to grow some really nice big buds 👍
Likes
2
Share
We placed the clones in 7 liter pots, 1 of the clones looks worse than the other 2, but lets give her some days, she need some nutrients and im sure she will get better
Likes
5
Share
Girls have exploded into flower! They had a big stretch and have started stacking very nicely. Flower came so fast, they are showing a slight phosphorus need, and perhaps a bit more cal/Mag to help with uptake and such. I’ve been introducing the Clyde nutrients slowly to try and avoid burn, but I clearly need a bit more. I am liking the results overall though. Happy Gardening 🇨🇦❤️🌱😎💨
Likes
9
Share
Got mold in one of the buds. So I removed it... don’t think she gonna make it... so much rain no sun.... amazing smell when visiting her But got a new problem I just discovered there’s a human path.... not far from the place I can see them they can’t see me... yet.... maybe try make some oil on here. She already really sticky