Likes
16
Share
Water only from here 1L at a time 13/09 - Watered @ 10:43 - Health inspection 14/09 - Watered with 1l - Added extra Fan 15/09 - No water needed today. 16/09 - Watered till run down for flush 17/09 - No water today damp 18/09 - flushed 19/09 - Flushed
Likes
2
Share
Buenas a tod@s... Bueno otra semanita más de estas hermosas nenas, ya más grandes y empezando a desarrollar sus frutos, la verdad q están creciendo muy bien, sin problemas, aunq hay veces q la temperatura este un poco alta las voy controlando y van muy bien, este cultivo yo creo q promete para bien... Me gusta ver buenos resultados cada vez q empiezo un cultivo nuevo, super contento y las niñas tanbm... 🙌🏻🙏🏻💀😎💪🏻 Buenos humos para tod@s...🔥🔥💨💨 🇦🇷🤝🏻🇪🇦
Likes
5
Share
week four of flower I have a feeling these are going to be monsters. I have never had an Auto flower this big before all my other grows with then they have been on the smaller side. so far, they look like they are going strong adding bulk and one is starting to fade in the fan leaves using up the N as the plant needs it. I did do some defoliation. on some fan leaves bigger than my hand this was the warehouse for the nutrients it has been grabbing from the soil. I might do 1 more round of Bloom booster and a Cal mag. the stems are pretty strong and are holding the weight of the buds well. nothing needs to be supported at the moment. cheers all P.S, Roll 2 fatties.
Likes
6
Share
Im really impressed with this grow, No issues to report, everything looks amazing Defoliated lots of the lower growth and bigger leaves .. buds are starting to really dense up and are looking beautiful.. Plants drinking 1l of water each day Back on a feed/ water schedule With nuts @ 75% strength Smell is getting stronger day by day ... Clone are also rooted and transplanted and in the little cloning tent ... Made big changes to the lights .. No more mars hydro .. not that i wasn't happy with them , i really did like them .. But got a amazing deal on this new light by eco farms 800w spider bar(STG-800W-D2) ... wow this light is really bright! .. Its drawing lots more power then my mars 2x1000 and 2x600 Hoping to get more dense nugs with this light although im about half way done ... Time will tell and i will review this light after my next grow
Likes
13
Share
@Pennuts
Follow
The drying process lasted 14 days and I'm in the 2nd week of curing, I've already tried some buds and neither the smell nor the taste are great, the taste and smell of both phenotypes is lemon.
Likes
8
Share
@Oldwied
Follow
Day 10 of flower The first flowers are growing. Happiness grows very fast. The living soil works great. Big thanks to florganics!
Likes
30
Share
I know these are not typical ways of training but then again the norm was not the norm at first :)
Processing
Likes
10
Share
Welcome to the beginning of week 13. Green Crack looks happy and healthy, if one can say that about crack lol. Not much else to report about this girl at the moment. Thanks for taking a look at my grow 👽🌳
Likes
9
Share
Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34
Processing
Likes
29
Share
Humidity has been the biggest struggle. The dehumidifier I bought was complete useless only moved RH 1% down. Tried a couple different things to try to combat the excessively high RH (75+%) openings up extra flaps in the tent didn’t work so I decided to turn on my carbon Filter fan. Which seems to be maintaining it at 55%, however prior to me being able to start my fan I had to clear the water out of my exhaust ducting. It had accumulated at least 1/4 gal of water, this to me was a clear indication of my humidity problem. Another thing I want to rant about is PH pens I haven’t been able to find a pen worth a damn and yes I have been properly handling them. My first one died on a watering day and I didn’t have a back up so I ordered two more off amazon which don’t seem to be working well either. I ended up doing it the old school way with the drops and shaking it in a tester. Oh I also gave nutrition a break past two feedings I had a slight burn on the tips will probably do one more plain water then put her back on nutrition. Went back to nutrition early then I intend due to a slight nitrogen deficiency I don’t thing it’s gonna be a big issue just gonna continue to monitor.
Processing
Likes
6
Share
Semanas andamento satisfatório uma esta com 4 semanas e as outras 2 com 2 e meia!nao vejo a hora de poder apreciar a engorda dessas plantas!
Likes
4
Share
Welcome to Veg Week 4 of Sensi Seeds Mandarine Jam I'm excited to share my grow journey with you from my Sensi Seeds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo Strain Mandarine Jam: Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Sensi Seeds • 💧Strain Info : 20-23% • ⏳ Flowering Time: 7-8weeks
Likes
3
Share
Likes
30
Share
Hello Diary. We have reached the end of the third week of flowering, Sherbet Queen is already a real beauty. She reached 89 cm which is one cm more than last week which means she has reached her final height. The flowers fill nicely, the scent is more and more intense and they stick to the fingers to the touch. The leaves are dark green in color and shine in the light. I cleaned the lower part of the plant earlier so that there is a good flow of air through the plant itself. Impressive plant, shape, height, ideal dimensions for my Farm. I water the plants every two days, they drink really a lot of water. This week I added Bio Grow, Bio Bloom and Alg-a-Mic from BioBizz to one watering. The temperature is around 29 degrees, during the day it even rises a little above 30 degrees, but so it is in summer, I hope it will not cause stress to the plants. Here’s what it looked like last week. 20/06/2021 - Day 36. Watering. I added 1ml / lit CalMg to 8 liters of water, I lowered the p.H. at 6.5 and with that amount evenly watered all three plants. Temp / Humidity on the farm - 29 degrees and 60% humidity. 22/06/2021 - Day 38. Watering. This time I just regulated p.H at 6.3. I did not add any nutrients. Temp / Humidity on the farm - 28 degrees and 47% humidity. 24/06/2021 - Day 40. Watering. I added Bio Grow 1.5 ml / lit, Bio Bloom 1 ml / lit and Alg-a-Mic 1ml / lit. p.H. I dropped to 6.4. Temp / Humidity on the farm - 31 degrees and 52% humidity. 26/06/2021 - Day 42. Watering and photography. p.H. I dropped to 6.5. Temp / Humidity on the farm - 28 degrees and 45% humidity. That’s all from me for this week, thank you all for your support, see you soon.
Likes
11
Share
@Farmer1
Follow
Love to watch here growing,she need a new pot and LST,I didn't have much Time but will be done in the next days.
Likes
Comments
Share
@madlangs
Follow
All going well. Only problem I have had is the big white widow got mold in a bud at the very top off the plant. Very strange
Likes
2
Share
First set of cutting got a bit of overwater change the container they were in n lef them outside n rain came n soaked dem .IYKYK fittest of the fittest will survive.. had to cut the mother's again earlier than I would want to jus to ensure we stay on track from the minor setback...also added gorilla #4 to the ship already cut her
Likes
17
Share
Well.. nice start of a new week. Still stretching so today changing water for fresh water. Going to level up the EC from tapwater 0.3 tot 0.7 with CalMag before adding nutrients. Then raising the EC to 2.2 I hope (depending on the PH not dropping below 5.8). Hopefully they will consume less water and therefore stop stretching.. We will just see what happens. Easy to lower EC afterwards and also easy to raise PH. I just have to add some tapwater. 13/7 some shortages and maybe too much light. Reducing time with half an hour daily. Raised EC to 2.3