first day of week 7, pheno #1 stretched very little with short internode looking compact while pheno #2 stretched amazingly with lots of young buds. I slightly increase the dose of bloom and quantity of water.being bushy plants a good defoliation did them good.See you next week, bless and protect ✋🌳

Hello Growers & Tokers! Roots, roots, roots. At the beginning of the week they got transplanted into their final pot, 11L fabric. Medium used was Light Mix from BioBizz. Synergy from Grotek nutrients was blended in the medium to help out the roots. They were a bit down after transplanting but by the end of the week they were doing better. I'll leave her be for a week then I'll be topping to spread that canopy out and have loads of colas. Or at least that's the idea but two of them seem to be growing faster than the others so I might have to die those tops down. Take care out there and happy growing!

📅​ 28/04/26 🗓️ D057 (B3 / D1) 🌡️ 1.1 💨 1300 💧 1L 🥗 Bloom A-B, CalMag, BigBud, Bud Candy, B52 ⚗️ 1.4 🔬​ 6 🛠️ Removeed SCroG 📋 I removed the net to allow them to stretch without constrains. I'm going to put another net just above to address the buds in the right place 📅​ 29/04/26 🗓️ D058 (B3 / D2) 🌡️ 1.2 💨 1300 💧 1L 🥗 Bloom A-B, CalMag, BigBud, Bud Candy, B52, Urtimax ⚗️ 1.5 🔬​ 5.7 🛠️ - 📋 - 📅​ 30/04/26 🗓️ D059 (B3 / D3) 🌡️ 1.2 💨 1300 💧 - 🥗 - ⚗️ 1.4 🔬​ 5.9 🛠️ - 📋 - 📅​ 01/05/26 🗓️ D060 (B3 / D4) 🌡️ 1.2 💨 1300 💧 - 🥗 - ⚗️ 1.4 🔬​ 5.9 🛠️ - 📋 - 📅​ 02/05/26 🗓️ D061 (B3 / D5) 🌡️ 1.2 💨 1300 💧 - 🥗 - ⚗️ 1.4 🔬​ 5.9 🛠️ - 📋 - 📅​ 03/05/26 🗓️ D062 (B3 / D6) 🌡️ 1.2 💨 - 💧 2L 🥗 Bloom A-B, Calmag ⚗️ 1.8 🔬​ 5.9 🛠️ - 📋 CO2 run out 📅​ 04/05/26 🗓️ D063 (B3 / D7) 🌡️ 1.2 💨 1200 💧 - 🥗 - ⚗️ 1.8 🔬​ 5.9 🛠️ - 📋 CO2 tank refilled ============================================================= Legend: 📅 DATE ​🗓️ ​DAY (StageWeek / Day) 🌡️ VPD ​​💨 CO2 💧 WATER ADDED 🥗 FOOD ADDED ⚗️ EC 🔬​PH (adjustements) 🛠️​ ACTIONS 📋 NOTES​ 📅​🗓️​🌡️​​💨💧🥗⚗️🔬​🛠️📋​

Flushed her for 3 Days, after that i didnt give her any water for 2 days, and now she is going in the dark room for 2-3 days and then will be hung. Had to cut one Main-Cola due to Mold. The Plants are growing awsome, strong smell, and rock hard nugs in all colors. Its now the last week, she has been in flower since 8 weeks. Be ready for the harvest and the smoke report ;)

So it is a new week and so far so good, this seems not to get my best grow, but the Zillions and Cookie Casket are developing good, Mimosa Evo is still a bit behind, but starting to get back into the "race". So far so good. PH 5.70 in the tank with EC 1670.😅😅😇 Edit: Raising EC to its peak of 1832 in the tank with PH 5.70 Edit: Now it is time to clean the tank and hoses from bacteria. Because of continous PH- drift, I have already setup a new tank with only Minearl fertilizers and Purolyt to clean the system for 3-5 days from bacteria. This is the normal consequence of using bio- adds in an autopot- tank system with airdomes. For bio- injection I will use hand watering from top twice a week, yes from the top in an autopot system. I designed an oCoQ- bio- injector in order for being capable of doing this! 😇😇

LST is doing great 😌

Burning leafs !! Too nutrients

Testing for Connoisseur genetics Outback haze #1 24th January 2022 She stretched a little bit 😆 Check out those thin arse sativa leaves 👌 Absolutely Glorious 👊 I gave them both aprox 6 weeks worth of Bio bloom , then I'll figure out what to add when the time comes . It will probably be guano and other goodies but this strain could take a fair while to finish so will need to keep adding to the soil as I go . Whether outback haze is a heavy feeder or not will need to be seen . This shit's about to get real 👈 Cheers for stopping by 👍

I hope you will enjoy my work, the peaks are to dry, share a few days for comments or advice, or questions please write to me.... !! peace & love

Changed into bigger pots and added the chemical bride

6 weeks in veg from seedling

Week 8 Light cycle=12/12 Light Power=180w Extractor controller settings High temp= 24c Low temp= c Temp step=0c High Rh= 50% Low Rh= % Rh step=0% Speed max=10 Speed min=1 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 22.0c Radiator off= above 23.0c Dehumidifier on= not in use Dehumidifier off= not in use Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Dehumidifier on= not in use Dehumidifier off= not in use VPD aim=0.6-1.4 DLI aim=40-45 EC aim=1.9 PH aim=6.4 Thur 15/2/24 #2 (Day 50)(Day 18 flower) 📋 H=93cm D=19cm DLI=65.0 Hst, remove some side branches. Fri 16/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=bloom nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=0.75ml/L Terra Bloom=4.0ml/L Sumo Boost=2.0ml/L Roots=0.2ml/L Easy Ph down=0.11ml/L Ec=1.85 PH=6.4/6.6 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L(13.5L) Total volume left=3L Total volume used=10.5L Volume per plant=2.6L (Est) Runoff. Total runoff=1.2L Ec=2.13 PH=6.1/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #2 (Day 51)(Day 19 flower) 📋 she is starting to show signs of light stress. Lowered light power from 180w to 170w. New DLi=60.0 Sat 17/2/24 #2 (Day 52)(Day 20 flower) 📋 H=94cm D=18cm DLI=62.7 Sun 18/2/24 #2 (Day 53)(Day 21 flower) 📋 Lowered light power again as they are showing a bit of stress from the light. Power was 170w now 160w. I'm going to have to have a think about my next grow, either I stick with this tent and hit the plants hard with light when I flip to flower to keep them small, or try and cram a slightly bigger tent in the space allocated for it. This tent is 61×76×150cm with the option to extend it to 173cm. Mine is configured to the 150cm height, but because its extendable the top 30cm is inaccessible at the best of times let alone when the plants reach a decent height. Extending this tent will be pointless because that's another 23cm of inaccessible space. Besides I only have a max head room for 160cm where the tent is. Mon 19/2/24 #2 (Day 54)(Day 22 flower) 📋 H=96cm D=16cm DLI=62.7 HST Tue 20/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Easy Ph down=0.01ml/L Ec=0.2 PH=6.2/6.2 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L Total volume left=2.4L Total volume used=10.6L Volume per plant=2.6L (Est) Runoff. Total runoff=1.25L Ec=1.33 PH=6.4/6.4 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #2 (Day 55)(Day 23 flower) 📋 Wed 21/2/24 #2 (Day 56)(Day 24 flower) 📋 H=100cm D=12cm DLI=65. She has reached a nightmare hight for this tent and I can't get my camera in there to take any pictures. She is progressing at a decent speed and looking great, she is showing a few signs of heat/Light stress so I'll have to dim the light a little soon. Back soon. Take it easy.

She has finally finished, since this journal was only to help me track my Success feeding, for the first time. Ill do my actual review and etc. for my Eternity cup entry. To sum this one up. Stank ass, Loud AF and greasy nuggets! Thank you all for stopping by and chatting. Enjoy this place 😁💪😻🔥🔥🔥🤘

So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.

Okay Madame LemonPaya Ltd.by FastBuds is history now haha. I am still a beginner, this is my second photoperiodic strain. Started growing in May 2023. And it was an Experiment, first time in coco with Autopots. Did a lot of mistakes at the beginning but catched her and send her into flower. The lower buds are Rock hard too, this was a little plant in a small pot, so i am happy with the end result. 647 wet trimmed and without stems/leaves. Is in my Cannatrol now for only 6 days. I will Post the dry weight in 6 days. Thanks to Terra Aquatica, FastBuds and Bionova. I will use your products again!

Mephisto Genetics Double Grape 4th week of Flowering 29th December 2019 This plant is really starting to impress me with it's smell and stickiness. Also the main stem seems to filling in with bud beautifully with very little spacing between branches that arent covered with bud growth. I gave her a 1/3rd of a cup of Mr B's Green Trees Bloom mix and a 1/4 tspoon of Great White. Thats it for this week See you back here in 2020 😁

Frosty strain ,sticky icky icky0

Hey guys . My cutting heating broke 3-4 weeks ago, which was fixed immediately and everything went wonderfully. Now, 3 days ago, the central heating broke down in the entire room, so that at night I only have temperatures of around 13 degrees :-( . One or the other lady is slowly starting to see a phosphorus blockage, as this can no longer be absorbed at temperatures below 15 degrees, like many other nutrients :-( . A friend looked at the heating yesterday and came to the conclusion that a real company had to do it, which is by no means possible for a stranger to enter my room. I quickly ordered heating mats for all the boxes so that the ladies could at least get warm feet. That's all I have this winter full can do . Let's hope everything will be fine 🙏🏻. As soon as the heating mats are attached in the coming days, I will post them in the pictures. Now for the update. Despite the severe cold, the ladies are still doing well and have made good progres . The ladies only had to be watered once this week, each time with 1 l, because it absorbs the water very slowly because of the cold and I don't want to overwater it. I took every single plant in the pot to take a close look at their roots. These are snow white and look very healthy 🙏🏻. It was also the last time neem oil sprayed so that the last trips are finally gone. Otherwise everything was checked and a lot of planning was done, like I do with the heating mats. Since a friend had the same problem in one winter and the heating mats got 10 degrees plus on the pots, I am very confident that it will at least bring something for the last cold month 😃 🙏🏻. I'll start flowering tomorrow by switching to 12 / 12 h because the ladies mustn't get too high because the small flowering tent is only 160 cm high :-) until then have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Strain at https://pcg.international/shop/pcg-int/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany