Likes
Comments
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 👊😺Woo-Hoo!! About half way there!! everything is going fantastic in this tent! (wish i could say the same for all of them😿)..The SP-3000 is crushing it again! Their nodes are spaced perfectly for fat buds, they start stacking super low, we would normally get light colored growth down there with our old LEDs, this is definitely penetrating deeper..We're still feeding with every watering but one standout will be getting just water this week (too dark)..we removed a few more large fans from the tops but nothing drastic...temps are much better since firing up a 2nd 390CFM for the far tent.. all 3 tents pump thru 6" host to a single 8" hose out a window, the ambient temps of the room are much warmer than the inside of the tents with that much air moving.. thanks @Asnoriu for confirming we wont be hurting much running full time with some negative pressure this summer..We're counting on these "Fast" strains to go about 8 weeks but time will tell.. not too much else to report, its been a breeze this week...thanks as always for dropping by and happy harvests friends!! ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
14
Share
D29/V25 - 29/04/23 - Benting D30/V26 - 30/04/23 - EC 0.9 pH 6.5 D31/V27 - 01/05/23 - LST and Benting D32/V28 - 02/05/23 - Some other LST D33/V29 - 03/05/23 - Added water and nutes - EC=0,9 pH=6,5 D34/V30 - 04/05/23 - LST D35/V31 - 05/05/23 - Nothing
Likes
Comments
Share
A new version of the classic. The old classic strain now improved and in auto version! Just like the name suggests. Expect up to 500gr/m2 of super big buds. Ideal for beginners. Top-quality buds without much maintenance or extra effort. Indica-dominant hybrid. A relaxing high that comes hand-in-hand with a pleasant head buzz.
Likes
6
Share
Vanilla Latte is very special strain for me: I've never grown the plant like this: thank you Humboldt Seed Company for such a good job
Likes
2
Share
@TowersD
Follow
In the beggining of week 4 of flower the phenos are showing differences. Nanaz x BBC are way toller that the Headbands. Also, Nanaz x BBC #2 has no pistils but it is a female plant. I have that happened before when I grew the Banana Butter Cups S1
Likes
21
Share
@Whitebelt
Follow
Beginning week 9 Plans this week: Make a long time lapse while away this weekend - post more photos too Lollipop Tuck and tie a bit Possibly build a second scrog level?? Thoughts anyone?? Research and purchase or build a “grow room controller” - tent: temp, rh, light(?), co2(?) — rez: ph, ec, temp, water level - maybe more stuff like tie in the cameras, also basement temp and rh, fan and lights and pump contro. Nutrient dosing and ph control would be awesome but likely too pricey— but I’m a geek and this will be fun! I’d prefer a prebuilt system but I’m not totally opposed to building an Arduino/pi style solution (reliability and time to get it right are concerns tho - plus I have an arcade cabinet project I’d like to get to soon) — **ANY THOUGHTS OR ADVICE ANYONE??? To do list: I picked up some angle aluminum and I plan to finally make a single frame for the numerous LED lights Mount things to the wall (temp and humidity sensors, timers, utility light, etc) General cleanup and house keeping - wire management etc Install new portable air conditioner in the basement - this will be a bit of a project - casement windows and other issues Hopefully this week: install a utility sink in the basement and tie into the water lines and waste lines of the house (no more carrying water and waste upstairs!!)
Likes
58
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Flowering day 22 since time change to 12/12 h. Hey guys :-) A wonderful week goes by and the lady is developing well :-). The buds begin to develop and give off a delicious smear through the tent. It was poured 3 times with 1 l each time (for nutrients, see nutrient table above). Otherwise everything was cleaned and checked. Stay healthy 🙏🏻 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at : www.Zamnesia.com Type: Banana ☝️🏼 Genetics: OG Kush x unkown 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Nutrients : Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4
Likes
55
Share
@valiotoro
Follow
Week 9!🤩 Light off I had like an illumination 💡 She looks like the Starry Night(Vincent Van Gogh June 1889) ⭐️🌗 Covered in trichomes❄️ I can harvest the super soil now for more « safety » but it’s not my style I prefer to push the plant until the limit🤠 Light at 100% In the light soil max 2 more weeks✂️ In coco she s flyiiiing buds are forming everywhere🤩
Likes
36
Share
@Salokin
Follow
Hi Growmies, She is bones and buds, all of them are rock hard, the nuggets itself stopped stretching and I therefore added some PK13/14 to induce and support swelling and later on the ripening . I got my hands on a sample of Rockzbastic from Atami, any thoughts, as this could be fed week 5-6 of flower, so I was thinking of adding it next week. Other than that are the expectations super high as of now. Guesstimate would be roughly 3-4 weeks to harvest.
Likes
14
Share
@Terpyboyz
Follow
Alright growmies 🍁🕺 week 6 of veg - girls are starting to get there Colour back into them now 🙌🏻2 girls have a bit off a potassium def but same strain so could be a sign(worst part about running multiple strains) that will clear up with the next few days. Little update on this weeks progress. Start cloning next, and repot will be on cards 👏🏻 light work 💪🏻
Likes
11
Share
FORBIDDEN 🚫 RUNTZ by FASTBUDS Week #8 Overall Week #7 Veg This week nothing really to report she looks like a half sphere how round she is she's round as she is tall right now. Stay Growing!!
Likes
3
Share
11/08- Week 4 of flower and the buds are really stacking up. The smell is getting stronger and the plants have pretty much reached their final height. The height of the tallest stem is 70cm which is perfect as it gives me about 50 cm of space between the light. I will water them today with some nutes. 16/08 - watered both plants with 1L of water ph 7. Increased amount of nutes as I noticed the plants are demanding more. 20/08 - watered again with 1L of just water ph 7. Hope you have a great day! Peace
Likes
15
Share
@Growshh
Follow
The smell is amazing and the swelling even better! Gonna taper the nutes off and wait for them to finish...
Likes
8
Share
Have lights on sunrise sunset. The been testing out best high intensity lighting schedule. Wish I had c02 to add into the tent. Plants were getting 1600-1800 par for 3 hours a day. I noticed they were getting slight tip burn so I lessened the light intensity a little bit and extended the peak sunlight from 4 to 6 hours. Now they get 1300-1400 par for 6 hours a day. They are getting really good air flow, humidity, temperature. I've been replacing the water every 2 days now and topping off almost every day. Just switched the ph from 5.8 to 6.5. I think that's recommended for flowering. Currently they get 2200EC I use ro water. They get 250ec of cal/mag. 400ec of lotus boost and 1400-1600ec lotus Bloom
Likes
29
Share
Was a difficult plant to maintain. Keeping her from getting rot was no easy task but she pult through and I got some really tasty bud, pungent, sweet and earthy. Some berrie taste. Really nice.
Processing
Likes
16
Share
@MG2009
Follow
Good week here #1 is 10" and wider,took a clone. #2 is nice too she is 8.5" tall , both are healthy i will be flowering soon, I want both about 12" when I flower them. So maybe mid week flip? We see. Thank you for dropping in hope you have a great day🙏 1/08/19 Mid week both one and two are females, I will try to a good picture to show her pistils. #1 is 11.5" tall, and # 2 is 9.5" i anticipate flowering plants at start of week 8.
Likes
8
Share
Likes
7
Share
😅😅Girls were developed by different methods one were topped when she has only two nodes (third I topped), second was only LSTed. They were transplanted once from 10L bag to 20L bags. Topped roots developed much better then untouched had. Topped growed for about 71 day, and untouched 72. Wife noticed mold on few colas, I cutted them and cut out the affected areas. Bushes were Ripenning for about 12 days, Unfortunately I didn't flushed them at all. So topped girl was putted to hermetic container and placed in freezing camera exactly from cutting. Secon one I putted to growbox under the out fan. I bought vacuum pump and jars, and dry topped by quick freezing method. And untouched was dryed by usual way. After all results are: Wet weight: Topped: 450g buds&stems; Untouched: 380g buds&stems. Dry weight: Untouched: 80g buds, 10g stems; Topped: 110g buds, 13g stems. This is my firs grow, I think its great result. The common mistakes are: uncontrolled environment ph, humidity, and that I stopped plant growing height with early low distance to the lamp. Thanks Bulks for great genetics .: 1: Awesome strain, Great, really easy to grow, I think if I had fan I could easily avoid mold. But I haven't =))) High is awesome energetic uplifting, I wanna go to training or begin to cleaning in my house. Good luck. May the Force be with You.00
Likes
30
Share
Welcome growfessors 👽 another week begins for the outside grow. Green Crack and LSD are slowly progressing. They're in for a hot week this week, temps between 26 & 30°c. Not much else to report, peace growfessors 👽🌳💚
Likes
35
Share
Monday, March 1st 2 of 3 Seedlings showing up, the 3rd may have Problems,,, i can see it, but it looks like its wilting i gave some aloejuice around the Seedling and covered it again... we will see The other ones looking good, and will develop good Friday, March 5th Now all show up and we can start counting Weeks