Recommended
Likes
21
Share
@Hoodoo
Follow
My biggest harvest yet from a single plant! Closing in on 1 pound per plant which is very exciting. I could have vegged this plant longer but it still takes forever to mature. It never produces amber trichomes in my hands and just stops growing even though it's still consuming nutrients. This is the nicest LST/topping job that I have done yet and every branch produced a massive cola. I lost one cola to white mold but I have busted up the rest and inspected everything so I think it was an isolated incident. It smells amazing and it's gonna cure in the jars now! Thanks for following along on my 3rd White Widow run. I am going to be focusing on autoflowers
Processing
Likes
21
Share
Likes
60
Share
Beginning of week.. I went up a tad on the nutes today.. And went down on the light power last week.. It was about 65% - 70% power which was quite a bit, I guess.. I put it at 50% power and she is finally starting to get some height to her.. I noticed more pistils toward the very top. I really hope she doesn't start flowering too soon.. I'd like to get some LST done on her. But she is happy and healthy! Next day... Even more pistils! Its been awhile since I grew an auto.. So I kinda forgot how early pistils can start poppin out but still be in veg (preflower). I just really wanna turn this girl into a flat bush! 10 mins later... Ok.. So looking back at my other autos.. This is pretty typical for them to start showing preflower this early.. She should still have 2 or 3 more weeks of veg with preflower! Mid week.. This is a day early.. But close enough.. 3rd week and growth is beginning to explode! The very first node's branches aren't really doing much.. Plus they are damn near to the ground.. I'm wondering if I should just remove them.. Maybe not yet.. But soon.. Or when I finally apply some LST. She is doing great!... No deficiencies.. No excesses.. Autoflowers are a trip! Can't wait to see what she looks like in another 7 days! I wanna try to do the entire grow without removing much, if anything.. But if this bottom branch doesnt start doing something.. I'm gonna have to remove it.. Its just bothering me way too much lol. Actually mid week.. SoI have been noticing a little bit of clawing and darkness.. BUT ONLY on the new growth.. As the leaves get older they seem to straighten out and lighten up a bit.. But I'm pretty sure it's nitrogen toxicity.. So I went down from .66mL/L to .33mL/L.. I use 3L to water daily.. So basically 1mL per feeding of all the base nutrients and the CalMag.. The Floralicious Plus has a bit of nitrogen too so I went down a tad on that as well. I read someone else's grow that says these girls are a bit sensitive to nitrogen.. So that's where I'm at now. Flushed this morning, and now for a small feed tomorrow morning. Will be updating with pics at the end of this week. Later that night.. Went ahead and flushed with just 2L of pH'd water.. Going in - pH: 6.3 PPM: 240.. Runoff - pH: 6.1 PPM: 640... So the PPM is still a bit high, but during the feed tomorrow, it should go down some still.. I should have ALOT of runoff tomorrow. I had the same amount I normally do when I use 3L just from these 2L.. Just cuz its 12 hours early.. The medium was still nice and moist.. And will still be in the AM for the next fertigation. Next day... Waking up this morning, I found that the oldest set of leaves that had been clawed cleared up.. For the most part.. Still dark asf.. But not as much clawing..the newest set were still clawed tho.. Which is understandable.. I made 3L of nutes.. Only used 2L in the AM.. Going in pH: 6.3.. PPM: 420... Runoff pH: 6.2.. PPM: 480... Not bad.. And I still have 1L left over which I am going to have to give her later today.. And will update with the runoff info also. Some say not to worry about the runoff pH.. But I think that is only because when people see it really low, they tend to give make the nutes waaay too high in order to combat the low runoff.. I just make my nutes 6.5 till ai see the runoff coming out at the area that works best for my grows.. Which is 6.2 or 6.3.. Let me explain why I use 6.2 to 6.3... My first 2 grows in coco I was using 5.8 to 6.0.. It worked well in veg but it was only during the transition and beginning of flower that I had calcium defeciency.. GWE website said that in hydroponics/coco that calcium is best absorbed at 6.3 or so.. So ever since I've just ran my girls at 6.2 or 6.3.. No lower, no higher.. The entire grow.. And haven't had any issues with deficiencies since! So that is MY sweet spot.. I may let it drift to 6.1 or 6.4.. But I try not to, for the most part. Later that night... I went ahead and did 1L of pH'd water first.. Then did the 1L of nutrient water.. Runoff came out at 420 PPM 6.2 pH... Nice... Also, I went ahead and ponytailed the top and pulled some of the longer branches on top of the fan leaves.. I'm only going to keep it ponytailed for the rest of the day (6 hours left of lights on).. Never tried this before, but with these super fat indica leaves blocking literally every branch.. I figured it couldn't hurt to give it a try. I may do it for another 6 hours tomorrow.. But I havent thought that far into it yet. I just want her and her branches to be long enough to begin some LST by the beginning of next week.. And already more than halfway through this week. Happy with the way things are going, for the most part... Almost end of week.. Ponytailed her again for another 6 hours this morning.. Just trying to give the side branches a little head start before the LST next week. End of week.. Welp.. I couldn't wait one more day to apply some LST.. I went ahead and did it today.. I also removed the bottom node, leaves and branches.. They were weak branches and I figured I could get them to take root and breed some seeds with them using Collidail Silver method! I really like how these branches have grown on this girl! It's like they already grew into a lollipop!!! Still only using the light at 50% power.. Which is helping keep the temps down a bit... Niceeee... I haven't defoliated anything (except the bottom node due to very weak branches and horrible looking leaves.. Which I'm guessing is because they were so low, possibly getting nutrient water on them during watering) but again, cloning those to breed with! She has completely exploded this week! Very happy with this girl! On to the next week!!!...
Processing
Likes
38
Share
@snowybudz
Follow
There is definitely some deficiencies present. I had planned on doing a flip to flower however this will put me off for another week or two while I correct any nutritional problem. Other than that they look good, very bushy. What do you guys think? Am I going to have a good 1212?
Likes
4
Share
Likes
9
Share
@Headies
Follow
So I have spider mites. I screwed up so much i think this is going 15 weeks. Lost coast to the rescue! time to finish these buggers off
Likes
2
Share
Likes
7
Share
Hiiigh friends 🙌 Welcome to week 8. 😍 Due to too much unwanted stress, flowering is delayed. The big lady was unable to withstand the training. Her neck is broken. But she is far from giving up and will fight to the end.. 😊 See you next week. 👋 Arturo for KannaKullektiv 🙏
Likes
103
Share
After two years of cultivation we wanted to re-propose one of our favorite strains 🤩 The first time we debuted we did it with her and we hit the box office by winning the first place in the competition .... LET'S SEE IF WE CAN REPROPOSE US BY IMPROVING CULTURE APPROACHES ! I hope you enjoy the content and I leave it up to you to judge the progress of my growing experience
Likes
12
Share
@GizaWRZ
Follow
That sick girl finish her life it was not point to keep her alife And she wasnt autoflowering that's mean i will not finish her even. I replace it by new one from another rent :) She name is Blue Dream'Matic :)
Likes
17
Share
@Naujas
Follow
This is my second growth in a suitcase, I got 30 grams of dry flowers from the first growth, but this growth together with FastBuds is obviously much better than the first one :) although the girl's leaves burn from the light, which is only 10-15 cm from the flowers, but the girl copes with it perfectly :) good luck to everyone.
Likes
19
Share
Almost to flower lighting. Doing a high frequency fertigation. Due to the properties of the growing medium. Made up of pretreated coco coir at about 70%, the rest is perlite. It seems to be difficult to overwater. I found the coco for cannabis website and have been following their recommendations for feeding twice a day. Trying to keep the run off water at 20-30% of what I add to the top of the pot. EC readings comparisons to input values have made watering twice a day with less total water each time. Is the only way to keep my ec measurements within 400 or .400 depending on the meter. Of the input. So I don't want the run off to read higher than 400 micro semens ec reading than the original solution fed to the plant. Going to stick with it. Purple stems are on all the plants. So magnesium is not being absorbed as well or I don't know. Not enough in the nutrients. I'm skeptical to use magnesium sulfate. Very alkaline.
Likes
105
Share
@Natrona
Follow
Frostbanger Plants 1-6 Week 8 May 18– 24 FLOWER 4 Nutrients : GH Micro 25 ml GH Gro 10 ml GH Bloom 30ml CalMag 30 ml Recharge 10ml Green sensation 16.5ml Power buds 7.5 ml 5/17 PH 6.3, PPM 1130, temp 71 1ltr each 5/18 PH 6.67, PPM 935, temp 68.5 1 ltr each 5/20 PH 6.67, PPM 1330, temp 68.5 2 ltr each 5/21 PH 6.66, PPM 984, temp 69 1 ltr each videos & pics 5/17 Defoliation of yellowing leaves, feed, pics As I mentioned last week, I must monitor and control the tent environment manually. For the past month, the humidifier has been an issue putting out way too much humidity; often leaving water in the bottom of the tent. In addition, the temperatures are also out of control. I added an AC last week to keep the temperature below 80. I finally determined the exhaust vent is also broken and has been for some time. AC Infinity does not extend the warranty to the replacement parts. I guess that makes sense since they would be in a state of perpetual free replacements. I bought a new one from Amazon that came with a new controller which is different from the controller 69 currently using. I decided that while it is very inconvenient and inefficient to monitor the tent through the day, I would rather finish this Frostbanger run without introducing a new unknown variable. I will continue using 3 circulating fans, the 4” exhaust vent from my 3x3. I have the AC pushing air in and the exhaust pulling air out. This creates a neutral pressure tent environment-neither positive nor negative. It looks like growth has stopped and plant height has been reached. Now is the time for buds to fatten and frost up. All 6 of them are short remaining less than 3 ft. They range from 15 to 31 inches. #4, 5 &6 are showing some fade, particularly #4. Upon opening the tent, a melon smell comes off the buds if I get close, and more stickiness was observed during the process of defoliation. They are living up to the new strain’s name. #5 is the frostiest followed by #2. Wow week 3 of flower and that much frost already. Before FastBuds announced the strain name and characteristics, I was disappointed that FBA2502 could be an indica sleepy strain but the universe provides what you need at the time. The new strain profile indicates a whopping 29%THC with mainly sativa uplifting, euphoric, social effects with sweet fruity flavors which I love and enjoy. In addition, I recently bought a dap press and this strain is frosty and resinous. She will be great to press for live rosin. FBA2502 is FROSTBANGER. Meet Frostbanger Auto, an autoflowering and Indica-leaning hybrid packing a staggeringly high THC content averaging 29%, making this one of the most potent strains on the market. It was created by Fast Buds through crossbreeding Gorilla Glue and Chemdawg, two equally iconic strains. Growers must know that these difficult-to-grow plants will pose specific challenges in terms of environmental control and nutrition, making them best suited for cultivators with some experience under their belt. The flowering cycle is short, averaging only 50 days, and yields are usually around 300g/m². The Frostbanger Auto flavor and aroma are both mouthwatering with a delightful combination of sweet, fruity, and flowery notes. The high is mainly Sativa-driven with uplifting and happiness-inducing effects that lead to euphoria and a general sense of well-being. You might feel sociable and talkative, but too spacey to say something. Following this surge of energy comes a deepening sense of relaxation, leaving you sedated and completely at ease with the world. Due to its potency and these long-lasting effects, medical patients hail Frostbanger Auto for treating chronic pain, stress, and even depression. Measurements: #1 15” #2 20” #3 17” #4 30” #5 31” #6 24” Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫
Likes
15
Share
@Jazzvet
Follow
13 Out - 22o dia- A planta atingiu os 13 cm e 4 folhas reais, uma boa altura para começar com os fertilizantes, 4 ml de Root Juice e 2 ml de Bio Heaven e Active-Vera por cada litro (2 L Total) 16 Out - 25o dia - Regada com a mesma mistura. 19 Out - 28o dia - Transplantei a planta para um vaso maior (7,5 L), ainda não estava pronta completamente Root bounded mas acho que mais vale antes que depois. Regada com 4 litros de água com 16 ml de Root Juice, 4 ml de Fish-mix e 8 ml de Bio Heaven e Active-Vera. Continua...
Likes
29
Share
@Rangaku
Follow
Moved her into a 27 L pot and started tying her down and spreading her out , had a small accident and ripped off a branch so had to duct tape it on and support it , pretty sure she’ll be sweet . Same same next week then start thinking about flipping into flower
Likes
11
Share
@dutchm913
Follow
colas growing in tremendous amounts, she is happy 😃
Likes
Comments
Share
@UrbanBoer
Follow
Another Day another Dollar, a week later and I am starting to like being attentive when it comes to my babies, reminds me of the lock down days… dark times, but cultivation kept the days ticking and the mind clear. This Lady over has truly made a leap from her miniature pot to a whole 20lt highly rich compost mix, posted a video showing my mixing skills… it is getting warmer as the days progress, I am nervously awaiting the first Thunder storms, my makeshift greenhouse will be put to the sword, would be a sad day if that sword prove mighty, this structure has saved my babies through cold fronts, negative temperatures, speaking of weather the picture of the thermometer and my catalogued weather don’t correspond due to, The thermometer is showing my greenhouse’s room temperature, and I am cataloguing atmospheric temperature and humidity, I will get better in logging other such as water ph, for now all I know is I use rain water, and when I water I use 250ml of water per 24hrs, each plant to keep soil moist, I will increase the volume as soon as the morning temperature are at double digits. I cannot be disappointed with how this grow is proceeding. When Summer Shines it burns.