Likes
Comments
Share
@Chupus
Follow
I put it in a glass of water , later I will transfer it to paper towels . as practice shows , the method is working . It's not the first time I've used it. the main thing is to squeeze a towel well, so that the seeds do not rot. temperature 24-26 humidity around 60%
Likes
4
Share
This week is pretty routine plants look good was going to flower for 10 weeks but most of the fan leaves are turning yellow indicating that it's almost time to harvest. There aren't too many new white hairs growing most are turning orange.
Likes
5
Share
Absolutely beautiful flowrs, ashamed that I had to flip her to flexor after a long time in veg period, I wish I had made her achieved a bigger size considering she's in a 25l pot, very sweet haze, you can really feel the blueberries in her flowrs, very special haze, I'm excited to taste her buds, killer seed, I'm gonna grow my last 2 beans as well which you'll be able to see here in my page, hope yo grow her many more times! Stay tuned to see how this flowrs develop on this 4th week! 👨‍🌾😋🍉🍍
Likes
253
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Girls still beautiful, the end is arrived 🏁🏁, Keep flushing Neighbors said stop to the party, Trichromes should be ready, smeel is so so strong 😱😱😱😱 💧 Give water each 2/3 day 2 l Water + Flash Cleaner (3 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 28 cm Mars Hydro Fan kit Setting 9 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - High Mars 36% THC🌲🌲 https://anesiaseeds.com/product/high-mars/
Processing
Likes
37
Share
@MG2009
Follow
09/12/2018 Purple tip cutting seems to be taking .#1 is filling out well lots of fresh flowers stacking up nicely.#2,#3,#4 all doing well👍hope they finish up in 4weeks🙏 No feeding this week just molasses for soil microbes, 09/17/2019 Did some defoiliating and green tie 's to spread out lower branches on #1 . she is a beast. Seeing, some differences between #2,#3,#4 .#4 being darker green, #3 is paler green #2 not as pale, #1 lighter green but not pale at all. Given deep soaking today, and I noticed phase 3 flowering is starting!🙏 should start stacking them fat buds for next couple of weeks hope she done at 10 weeks fingers crossed.
Likes
17
Share
@RoyColt
Follow
Always R.O water -Day99 watering 5 liter with Sensi Cal Mag Xtra 1ml/L - Total 200 ppm Ph 6,3 (Drain 0,75 Liter 950 ppm) -Day101 watering 4 liter with Only R.O water - Total 15 ppm Ph 6,4 (Drain 1,25 Liter 640 ppm) -Day104 watering 4 liter with Bio Organic Bloom 2ml/L - Fİnalpart Ripen 4 ml/L - Total 1800 ppm Ph 6,5 (Drain 0,4 Liter 1300 ppm)
Likes
9
Share
So for this week the training comes into play . So 1 ogkz was topped, 1 ogkz was broken , * note on the brake it was the best brake I have done , not because I am getting better at it mostly because the outer skin of the plant with the OG kz was much thicker and stronger than I'm used to so it broke quite easily. My guess is the correlation with the autoflower plays a big part in that. And 1 ogkz I just left it be . Green crack 1 kept as a mother 2 were broke 2 topped
Likes
5
Share
When the lights are off I will post another video so the green is easy to see!
Likes
9
Share
pics are from right before harvest on day 60 of flower. 9.5 weeks of flower
Likes
85
Share
Start of day 14 ... Oct 23 Check out the full grow video on latest weekly update Exceptional Growth thus far and each day ..... Decided to ponytail them today DAY 14 and 15 for 18hrs and will remove just before lights out.... Day 16 - 18 Leaf Tucking Day 19 begun LST , hopfully they don't run away on me.... Watering only when needed and adjusting lights when needed .... Rain Water Only !!!!! Can see the differences in Pheno types .... Loving it .....
Likes
226
Share
@HighTV
Follow
| 📅 Week 0 | | 🎪 4ft x 4ft | | 🍃 201 CFM | 11/06: Soaked 6 blocks of rockwool and the hydroton in 5.8 PH water to stabilize before contact with seedlings, 11/07: The germination of the seeds were started directly inside the rockwool that's lightly damp with 5.8 PH | 📅 Week 1 | Days 1 - 7 | 💡 450w 📏48' | | 🌡️️🌞 77 - 86 | | 🌡️️🌑 70 - 77 | 11/09: After 2-3 days of germination 4 seedlings have sprouted and the last 2 have cracked their shells and are making the climb to the light! Were going to let them stretch a little to better fit into their final netpots. 11/10: Plants placed in temporary net pot for more space under dome. Added water + air-stone to increase humidity from under the net pot. 11/11: Added water the the seedling with a dropper at 5.8 PH. Lowered the light to stop the stretching. 11/12: Added 5.8 water to the seedlings/rockwool with a dropper. 11/13: Adjusted Light some more. Added 5.6 PH water to seedlings with a dropper. 11/14: Added 5.6 PH water to rockwool through a dropper. Removed humidity dome for temperature. 11/15: Hydroton for final netpots soaking in 5.8 PH water. Added 5.8 PH water to seedlings. This Diary will be a little bit different. While the comments will include the whole tent and all the tasks done in it, the timelapse and vast majority of the pictures will only be about the focus plant for a better lapse experience. 😎
Likes
4
Share
Plant decided it wanted to switch to flower so I guess week 4 is officially flower for her. there’s a smell beginning to linger as well hard to describe but very delightful.
Likes
15
Share
And off we went, the adventure with Zamnesia's F1 Hybrids started off great, with a stunning 100% germination 8/8 born without any hesitation after a very short time in water and subsequently in soil. She is exactly at the 10th, she is the Wurlz, she grows well regularly and very similar to the little twin. One of the characteristics of the F1 Hybrids is stability and for now it has been thoroughly demonstrated since day 10. For the rest we have to say everything is going very well, the parameters are in order, the girls were born in a biodegradable jar which biodegraded a little earlier than expected and I proceeded with the potting, no repotting, be careful the seedling never came out of the jar biodegradable the roots pass it at a certain point of decomposition. So we are now in a comfortable 11 liter house that is perfect for autoflowering in my opinion. Unfortunately, the Zamnesia pots are about to arrive but I didn't have them in time, I preferred to repot them for the sake of the plants, we need to photograph them of course but first and foremost I'm a grower and I care about the health of my little girls. Something tells me we will be growing a lot of Zammi plants so we will use them in the Official Grower version next time. Wurlz F1 seeds specifically https://www.zamnesia.com/10669-zamnesia-seeds-wurlz-f1-automatic.html Site Description ZAMNESIA SEEDS - WURLZ F1 HYBRID AUTOMATIC: EFFECTS TO LEAVE YOUR HEAD IN A WHIRL! As the end product of combining Runtz with Watermelon Candy, Wurlz F1 hybrid Automatic showcases a reliable, uniform, and, above all, easy growing experience. The resulting buds offer mind-blowing flavors and soothing effects, making Wurlz F1 Automatic more than worthy of being on your radar. GROWING WURLZ F1 HYBRID AUTOMATIC As an autoflowering strain, it takes just 9–10 weeks for Wurlz F1 Automatic to move from germination to harvest. Fortunately, there's very little required other than a bit of maintenance along the way. This is partly due to the F1 genetics that make this strain robust and uniform, resulting in plants that reach a similar height and provide a similar (large) yield. Moreover, Wurlz F1 Automatic is highly resistant to disease, pests, and other ailments. Reaching heights of about 65–80cm, Wurlz F1 Automatic is not an overbearing plant and can fit into smaller spaces with zero fuss. Once ready to yield, growers have the potential to see a return in the region of 450–500g/m² indoors and 50–150g/plant outdoors. AROMAS, FLAVORS, AND EFFECTS OF WURLZ F1 HYBRID AUTOMATIC After Wurlz F1 Hybrid Automatic wows you with its easygoing growing experience, the best is yet to come: the smoke test. Teeming with terpenes, this cultivar offers a fruity and candy-like flavor tinged with just a little bit of pine for good measure. In terms of effects, Wurlz F1 Automatic is bolstered by 24% THC and a finely tuned array of cannabinoids, making for a soothing, physically relaxing, and, in larger amounts, couch-locking high. So settle in with some of your favorite friends, snacks, and movies; this is relaxation at its finest. As for fertilizers, I'm doing a small comparative experiment to finish off the fertilizers I had at home, it's not 100% indicative, it's only on two specimens but given the stable genetics I decided to try to compare the results of Plagron Vs Aptus, both excellent brands which they will certainly produce beautiful plants which are already of excellent stable genetics. In the next few weeks the comparison will be more evident now the seedlings are still very small and just potted. So seeds of all brands, in addition to these great F1 Hybrids and the entire Zamnesia line, fertilizers and everything related to the world of cannabis, you should buy them from the best online store in the sector www.zamnesia.io
Likes
8
Share
Almost ready, want to give 1 more week for some brown trichomes. Otherwise it's ready. Tones of super nice dence crystal buds. Great genetics. Last few times watering with raw cane molasses or just water. Very good genetics 💯
Likes
13
Share
Hi Gromie's, well it's the end of another problem free week! Week 9 going into week 10 of veg! I don't usually veg for this long but I'm just trying to get the timing right for perpetual harvest. Plants in flowering tent were harvested & drying now for 5 days, so these girls will be transferred to the flowering tent in the next few days for the start of flowering, I've allready planted new seeds for the following grow, so just trying to get on top of the timing for everything related with perpetual growing. Thinking of setting up a 4x2 tent with a 4 inch extraction fan & filter for drying, so I can cut out around a week, that way as soon as I've harvested & cleaned the tent I can transfer plants from veg instead of having to dry in the flowering tent. Have developed really strong & thick structure's from the H.S.T & L.S.T training. Plants are nice & healthy. Performed 1 last defoliation before they go to flower as they get very bushy quickly.
Likes
38
Share
@J_diaz420
Follow
Encantado de la oportunidad de crecer estás variedades, sin duda, llenaron todas mis espectativas 🍀😍🤩
Processing
Likes
97
Share
I’m baaaaack!!! Sorry I’ve been away for a while. I’ve been busy getting everything together for the next phase… Welcome to the Dude Garden 2.0! I now have 3 grow areas. Two 2x4 tents (one for clone/veg, another for mothers) and a large 10x12’ish flowering area (its actually larger than that, but I’ll be conservative). The tents are running 300w LED’s and a T5 for the cloning/sprouting station. The flowering area has a 1000w HPS!!! I’m totally psyched to see how the HPS does with flowering for me. From all the research I’ve done It seems to still be undisputed that HPS is the best for flowering (but not so good on the electric bill). I moved all plants from the tents to the new flowering area under HPS. That includes 3 Blackberry’s (FastBuds), NYC Diesel Auto (Barney’s Farm), DinaMed+ and Critical+ (DinaFem), Cream & Cheese CBD (Seedsman) and 3 Cherry Hemp (Elevator Supply Co). You’ll see the first 2 Blackberry’s are getting close to harvest, but looking a bit funky due to the issues they had early on as seedlings. The 3rd is looking much better and will probably yield more than the first 2 combined. I do love the purple and the aroma is insane. Note: The HPS gives much more of a yellow wash on the pics than I was expecting. I tried to color correct the pics the best I could and tried to get to the real colors, It should be pretty close.
Likes
153
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 The flowers are in maturation, look already end approaching, I given only 1 time water this week, I check trichromes, 1 time per week, For moment almost milky. Maybe end in 2 weeks. 💧 Give water each 2/3 days. 1,5l Water + RQS Bio Flo Pack PH @6 - Bio Flowering Booster Pack Thicker Flowers 1,2 ml/l Bigger Flowers 1 ml/l Sweeter Flower 0.8 ml/l 💡Mars Hydro - SP 3000 100% 57 cm. 🔥 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾💚🌲. Mars Hydro - SP 3000 💡💡 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light RQS - Epsilon F1🌲🌲 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/620-epsilon-f1.html
Likes
3
Share
Processing
Likes
62
Share
February 28, 2019 Update: Getting close to the end here. I'm going to start flushing the Cherry Hemp plants this weekend and chop them down the following weekend. The DinaMed, Critical+ and Cream & Cheese should only be a week or two away from flush also. Feeding only MegaCrop & Cal+Mag Pro until the flush. This week I took pictures with the lights off and my camera flash on, I think these pics look better than last weeks. Bonus pic at the end of the view from my bedroom window. I'd love to see my buds get that frosty! 👍