Likes
Comments
Share
** COST ** TO RUN - Used previous ⛺️ setup : $0.00 - Monthly electricity : $36.73 <-- other ladies sharing ⛺️ - 1 Gallon Fabric pot : $0.10 - Bonsai wire : Apx. $0.03 - Reused soil from last run : $0.00 FOR NUTRIENTS - Jadam Microbial Solution : $0.00 - Fermented Plant Juice : $0.00 APPLYING - JMS : 30ml / 1 Litter - FPJ : 30ml / 1 litter TOTAL COST : $36.86 Throughout the week, I give JSM, and fermented plant juice once each ^^ Hope you guys have a wonderful day today ^^v *** Please Like, comment & share *** Highly appreciated -----/-----<@
Likes
17
Share
@Mastr
Follow
So happy can't wait to harvest Anyone know how long for flowering for this strain???many thanks happy growing
Likes
9
Share
@Cheezy
Follow
Due to the tiny growth of this plant I haven't been keeping up to date with its diary. Photos have been taken throughout the process and I do plan on updating it eventually. I'm hoping that the quality of smoke turns my opinion around on this strain as I have had to turn to humor to deal with the absence of growth... But shes a perfect mini Christmas tree and boy does she smell good!!
Likes
4
Share
Well I’m a bit behind here. I left out of town for a few days and come back to some issues. Issue 1: Overwatered Issue 2: Light went bad and wasn’t producing enough to give my babies what they wanted. They stretched and didn’t actually Grow any bigger just taller. They was very weak and was almost like a noodle. I had a old 600w burple light that did the job. I tested UVs and she was still producing like a champ, she just gets warm. Issue 3: Mfing PEST. I noticed in my soil to what I thought might of been beneficial mites, I was wrong. After some great knowledge from GD pros come to find out it’s Baby Gnats. Found some organic DIATOMACEOUS EARTH garden safe. I had to transplant my babies already but only went to a little bit bigger pot and not the final one. Burying the stem, and left watering. My soil was moist enough to feed during transplant obviously bc their doing a lot better. I’m applying my DE to the dry soil and to help prevent any issues im going to do a straight 6.5 water feed from the bottom. Just applying the water to my tray and letting them go get it. I’m hoping the DE clears the bugs up and I can get these girls back on the right track. Lowered the RH to help fight off these bugs. As of right now they took well to the transplant and already have gotten stronger at the stem. With challenges come knowledge! Thanks for checking it out Peace love & grow
Likes
17
Share
We’ve officially rolled into Week 7, and it has been a glorious one! We were blessed with non-stop sunshine and temperatures hitting a balmy 30°C. I didn't touch the LST at all this week. The training did its job perfectly—the plant has a great, wide structure, the tops are leveled out, and the heavy stretch phase seems to be wrapping up. To keep up with her heavy flowering needs, her diet now consists of tap water mixed with CalMag, Bio Bloom, Top-Max, and a little touch of Fish-Mix. Appearance & Color: This girl has put on quite a growth spurt over the last few weeks! She actually shot up enough to slightly overtake the Black Orchid in height. But the absolute highlight right now is the color development. The flower clusters are turning a fantastic, dark purple! Even though the pistils are still bright white, the base underneath them is showing those beautiful violet tones. It looks absolutely stunning! Don't forget to check out the Black Orchid Auto diary on my profile to see her unique dark foliage!
Likes
7
Share
@Jschnabs
Follow
I highly recommend LST and topping the plant at least 2 weeks prior to flower. This strain reacts very well to it and getting an even canopy of big frosty buds is great. I must say that in the past 2 weeks the smell has become very steong. Be sure to seal whatever air leak you have in your flower space if you are concerned about smell. I use a 6 inch AC infinity long filter and it handles the 2 plants decently. As soon as you open the door to the flower side a wall of fruity-ish smell hits you. The resin production is amazing. I have never had a plant produce so much.
Likes
109
Share
2 of the cookie's had a little P deficiency Problem has been solved Rock on Growmies
Likes
14
Share
EVERYTHING IS HARVESTED NOW AND TRIMMING LIKE A MANIAC. STAY TUNED FOR THE NEXT BIG GROW. THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 https://strivenutrients.com/ Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Processing
Likes
22
Share
@Luv2Grow
Follow
Day 37 - Did a little defoliating, I’m really hoping it doesn’t stunt her too much. Guess time will tell! Day 38 - Everything seems to be ok after defoliating a bit yesterday, just feeding and waiting on her to really start flowering! Day 39 - No major changes with her, still growing like a weed. Day 40 - Still looking good. Day 41 - Just waiting on her to start flowering. Pistils are popping but no budding yet. Day 42 - Growing like a weed for sure! Really starting to stretch. Think she might be starting to flower finally. Hopefully, cause she’s gonna outgrow the tent if she keeps stretching!
Likes
19
Share
This weeks update as we finished out week four and started pre flower on these 420 fast buds Gorilla Glue
Likes
15
Share
@Uwish
Follow
The run continues nicely, we still had some temperatures of nutritive solution a little high with the heat of Danielle. It drops drastically in 2 days so I will finally finish this growth in the calm one and will be able to begin my bloom on September 24th. I apply hydrogen peroxide at a rate of 0.5ML/L, twice a week as a treatment. The root Rot X is used every ten days when changing the nutritive solution. I put less water in my system, in order to create a wet zone and a dry zone, I make sure that the roots are always immersed of course. As soon as the temperature drops, I will switch to 800 ppfd for the end of growth and depending on the evolution of the plants I may add some sensi grow a and b to increase the ec a little. If you are attentive, you will observe on the tips of the leaves or even on the leaves, spots of burns or deficiencies, it is simply the consequence of the pythium a few days earlier. The last growth update will be around September 24/25.
Likes
9
Share
It was a easy strain to grow and was happy with the several watering she needed! I was feeding her every couple of days and she rewarded me with some immense dense buds! I have one more of this strain that might be heavier! I just got done with my 2nd plant and she was a big one! Got 792grams or 27 Ozas Wet weight! My best so far with a 5 plant limit this is the weight of only 2 of the 5 I grew..
Likes
30
Share
@Momentum
Follow
Moderator - Words Remain (Video) mir ist das gras ausgegangen, wurde vorzeitig geköpft. die anderen 2 autos laufen weiter
Likes
16
Share
Bud sites everywhere now, I’m hoping these are gonna yield over 100grams to see me through this epidemic that we’re all going through right now. They’ve all been great genetics to run, I’ve learned a lot from these girls and realised just how nitrogen hungry they can be and also how cal mag is essential because coco seems to hold onto it if it’s not added in.
Likes
24
Share
@AutoCrazy
Follow
Week 6 This Lady is up to 8 tops😎. Now I just have to get each top in the right locations at which point I’ll let them get a few nodes taller and then flip. This Lady is growing a little slower than her roommate (A Mimosa EVO) so I left a few extra fan leaves on her in the hopes that will speed her up a bit. I have noticed that this plant seems to throw the two main branches at a node but it also throws out additional branches. I’ve had a plant do this before and in my experience it makes the buds denser. We will see how it goes with this lady. Cooler internals are: 6.0 pH 0.4 EC 56 F solution temp. I can’t wait to flip the tent !!!! 🔥🔥 Onward 😎🍻
Likes
72
Share
Likes
5
Share
Bonjour à tous, Très jolie départ sur (21g) (21 de sortie 👍👍👍). Mise en pots définitive aujourd'hui 😊 c'est parti, maintenant je vais encore plus les bichonner 😊😊😊 j'ai hâte qu'elles grandissent. Je vous ferai une photo tout les jour pour voir leurs évolution. Bonne journée à tous 😉