Day 78. All is good, think next weekend is last day for two Alaskan Diesels. Need to put few pure water waterings through them. Other girls still need food, so I took all N and CalMag away and will keep feeding for few more weeks. Northern Lights are ridiculous behind ... But they were in shade and still trying to achieve something .... Happy Growing !!!

nice harvest , very resinious , gluing my fingers. i ll update when it will be dry. i hope something like 100g on this plant but i will be happy if i have 80g. i dried a bud in oven to try the effect , it's mainly indica effect, goos to watch a movie or doing relax activity, to drawing, or making music.

It’s been 7 days and one of my amnesia hazes is getting yellowish spots on it not 100% sure what’s the issue im going assume it’s too much water? Confused cause the other have same soil and every same amount of water and don’t have those issues I have the light right now about 1.5 ft away from the plants moved the light down I felt like they was stretching and becoming real skinny been keeping the temp about 75 and humidity somewhere around the 60% also I used fishshit today in the watering hopefully that’s helps The sour diesel I’m pretty sure I dropped the seed to deep my mistake so I removed a little soil until I seen top of it and now it’s looking like it might make it it just a little behind the amnesia haze The two in red solo cups (black Truffles) are growing pretty fast looking bit better then the amnesia haze and I found them seeds lol anyway if you looking and see anything that could help (Please do!!!) also if your using ac Infinity controller 69 I need help!!! Today the first time I messed with it to make make the 18/6 schedule and not 100% sure if I did it right yet I wanted to make it on 5am-11pm off the other 6 I had it on 24/7 all last week and not sure is that caused the yellowing or not I doubt it but I’m NEW and I’m not sure I’m a YouTube university grad 😂😂 But yea thanks for looking and I’ll try to post more day D14

Pretty lil pink thing , going on a flush now and coming out next week

Lets grow my ladies. Looking good in the big box 🌲

It smells of nothing but diesel n a very pungent Kush smell the berries nor mango scent hasn’t quite poked thru yet but it definitely smells of quality bud in the veg closet ha may need to upgrade my carbon filter. Gonna move these ladies at the end of the week. Thanks for tuning in!

Compost tea turned out well and if your curious about the microscopy, check the comments on my GMP grow. No signs of senescence yet so no feed needed, they are in a second run of the same soil so there should be plenty in there from before. Not very resinous or smelly, with weird wide stumpy buds. Definitely my least fav pheno of any plant I've grown so far, but it's the end product we're after so she may yet surprise.

Welcome growers Third week of life ended for this this little CREAM CARAMEL 🍬🍭🍫 She still growing in a growbox, 120x90 (cm) with nine other ladyes of different genetics 🌿🌿🌿 Looks pretty happy, great vigor and big leafs 🍁 Earlier in the week I transplanted into a 3l plastic pot.. Usually my choice of pot is the smartpot or the airpot 💯 And so, considering that the soil will obviously remain less aerated than usual, I have chosen to use a greater quantity of coco coir in the substrate I roughly prepared a mix of 50% light-mix (Canna professional and Biobizz), a 30% of coco coir (Atami), 10% worm-cast or humus (Atami) and around a 5% perlite wich it's already present in the light -mix.. I have also put a few micorizzae (Micosat F), like 10 grams, in direct contact with the roots and around 4 grams of Microlife (Bionova) in pellet form I will use this last one also for making an areated Tea, but during flowering.. About nutrients 👇 In this week i have giving their always organic/veganic nutrients.. Root-Juice (Biobizz) and Rizostimo (Biomagno) for the last time, plus a little bit of silicium (Bionova) and then Activator (Biomagno) / Crescita (Biomagno) / The Missing Link (Bionova) / X-Cell (Bionova) {This last two i have used in a foliar spray solution} Simply a little bit of everything at any watering 💧 About the lights 💡 I currently using for the first time, two Mars-Hydro SP3000, running at 25% of the power for now.. Next week im going to increase at least to 50% ⬆️ Onestly this lights looks pretty solid, definetly intense, with a spectrum really close ro the sun light One of the cool things about it it's that you can connected each one toghter with a cable and so you can controll the intensity of the lights very easy, in a precis way 👌 We will see in this months how they works And that's all.. See you at the end of week n°4 📆 Thanks a lot for reading, hope you enjoyed 😎👍 FC ✌️ 🇮🇹

4/1/2023 Week 7- Day 1 of Veg (Day 59 overall) Water Change Day!!! Water was really low it was just above the hump in the Res cutting it close to not having enough water in the system to keep it going. They drank a lot making it close going the full 14 days. I am still going with the previous grows and adding 36 Gallons but even looking at the root I think the SILICA is working and the roots are further along at this point than in previous grows. This next two weeks will watch how much they drink and how low my Res starts getting, and will make a decision on changing the water weekly from here on out or still keep on the plan of every other week until Week 4 of Flower. Added 36 Gallons Mammoth SILICA= .5Mil/Gal = 18Mil CALMAG= .5Mil/Gal = 18Mil Root Drip= 1Mil/Gal = 36Mil FloraMicro = 5.4Mil/Gal = 194Mil FloraGrow = 4.2Mil/Gal = 151Mil FloraBloom = 4.6Mil/Gal = 166Mil ORCA = .5Mil/Gal =18Mil PPM= 536 PH=5.84 PPFD=500 Tent Temp= 76.5 Water Temp= 71.4 Humidity= 58% 4/2/2023 Week 7- Day 2 of Veg (Day 60 overall) Not much today, PH was at 5.81, I brought that back up to 5.90. I took care of some badly needed defoliation in each of the back sides .. I was able to see some really good clone material to use on the lower backside of each of the plants. I will be taking two clones from each to breed over the next few weeks depending on when I am going to flip them. 4/3/2023 Week 7- Day 3 of Veg (Day 61 overall) A little FIMing, A little Topping, and a Little bit of defoliation. Might have to take my clones during the week this week, I am trying to wait until Saturday to hit week 8 but again they are getting all over the place and I need to trim some of the sides and lower areas. 4/4/2023 Week 7- Day 4 of Veg (Day 62 overall) I decided to take my clones and clean up the lower half of the plants. I took 2 clones from each plant to go into the cloning machine. 4/5/2023 Week 7- Day 5 of Veg (Day 63 overall) Water Temp is sitting at 73. Right in my ideal range for my setup. Ideal range 70-74 My Temp Tent is my ideal zone75.6 Ideal for this grow 70-78 The lights are still waiting the switch to flower to get maxed out... The Humidity is coming in right at 60% I love it.. I took so much off yesterday I figure it was a good day to let them rest. 4/6/2023 Week 7- Day 6 of Veg (Day 64 overall) I needed to Defoliate some and I topped a little. The plants might force me to flip them soon. Next Wed is the 10 week mark half way through the 20 weeks. The net is Bingo... Which means that If/when the plants hit the net I will have to flip them. The Net is set to the max height that I can let them get based on the Breeders Stretch report 75%. 4/7/2023 Week 7- Day 7 of Veg (Day 65 overall) #3 is 22 inches Tall, #2 is 19 Inches Tall. Net is set at 24 inches. Net is also set as my Bingo point, if they hit the net then I have to flip no matter what to account for the Breeders recommended 75% Stretch allowance. I think I am going to have to flip right at the 10 week mark of the Competition which is Wed 12 Apr. I topped a little, I de-foliated a lot to start getting it ready for the anticipated Flip.

Starting to feel like autopilot. Running into some minor problems this week in terms of feeding. Plant #3 had a runoff PPM of around 4000. Immediately decided to fllush her, but because of the medium's waterholding - the earth feels really heavy, even multiple days afterwards. She will be enjoying a two week flush and will then be chopped.

Vamos familia actualizo ya esta semana, tengo un amigo que está convencido de que las corto pasadas y que mirándolas con el microscopio pues dice él que ya están. Yo les daba 2 semanas más pero soy muy cabezón, y esta vez le voy hacer caso aun sabiendo que puede que no tenga razón pero, le haré caso. Son 2 ejemplares de Zkittalicious, no saldrá mucha producción habiendo 8 ejemplares más dentro de ese indoor y siendo 300w . Creo que en seco rondarán los 40/50 gs entre las 2 pero no lo sabremos hasta el día de la verdad. Llevan ya el lavado de raíces rapidísimo se le echó el tiempo encima y les di agua esta semana. Veremos también si no varía el resultado final al ser un Corte tan temprano. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Las maximas de temperatura no superon los 26 grados y las mínimas no bajan 20, así que no me puedo quejar. Los niveles de humedad también son los correctos van entre 50%/60% de humedad relativa. Por supuesto el Ph lo dejamos alrededor de 6. Hasta aquí es todo, buenos humos 💨💨💨.

This week I found fungus gnats I added sticky boards and mosquito bits. A small amount of fading on oldest leaves. I did a small defoliation of the yellow fan leaves. I added bone meal to the top layer of soil and worked it in. Water at 6.5.

Última sett.di flush

Vamos en la semana 12 y esperando con ansias que el 2022 sea bn prospero..!! jejeje

Nice healthy plant nothing to complain about I’m excited about this one

Looks great 👍

Starting week 7 in heat. What a weather ! 30°C ! But how are they pretty despite that hot temperature 💋 They are soldiers ! They will be the best of all time, they will beat that heat 💪💪💪 They will stay strong and elegant until Harvest. No one will defeat these Gorilla and Pineapple flowers. Light everywhere, excellent bio nutrients and CO2 against this dark weather. This will be the weapons of my plants. LET'S FIGHT !!!!🤝

sound week on the soil. this grow is really lovely. starting to see some promising bud sites. I think i might trim too much but i want the buds to get the light. topped them and they recovered very fast. still yet to see some purple. dont want to mess with pH just yet

Spread this girl out a bit using some string and mild LST. She's responded super well and all the bud sites seem to be getting a nice dose from the TS1000 :) Bit late uploading this week but the pictures were taken back on Tuesday meaning this is still an accurately dated upload.

All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.