Recommended
Likes
Comments
Share
Day 29. No problems as far as I can see. Started doing daily feeds from day 20, figuring I'll keep consistent track of the runoff PPM, and it is right now at 330, which is the highest reading so far (too high?). Inflow has been steady at 420-460 PPM for a while, and will continue until flower. Last weeks topping turned out to be a FIM, and I now have 8 new tops.. "fuck I missed" indeed
Likes
98
Share
@Targona
Follow
Hello GrowDiaries friends. 70 days since my little girl sprouted from seed/harvest time🌱 Technical and general parameters from Zamnesia breeder: Apple Fritter Automatic 🍎🍏🍎 Growing Apple Fritter Automatic according to breeder: In the grow room, Apple Fritter Auto is a true pleasure. Its height rarely exceeds 100cm, and its structure is typical of an indica 🍀🍃🌲; think short internodes, thick, dark-green foliage, and vigorous growth. While Zamnesia’s photoperiod Apple Fritter responds extremely well to both low and high-stress training, Apple Fritter Automatic is best left to its own devices due to its short life cycle (which averages about 70 days from seed to harvest). 🌱🌿🌾 My experience: I made two major mistakes while growing it - high pH at the beginning of flowering and over-fertilizing during one watering 💩💩 It affected all the plants in the tent. Some more, some less. This plant was one of the resistant ones. Although the breeder himself states how sensitive autoflowers are and I can confirm that they really are, this strain handled this strain very well. This is definitely the most beautiful and strongest plant of the round 💚🍎🌱 The harvest turned out accordingly, I am really very satisfied 👍🌞 Strain data sheet Apple Fritter Automatic Brand: Zamnesia Seeds Parents: Sour Apple X Animal Cookies X Ruderalis Genetics: Indica-dominant Auto Flowering Type: Autoflowering Flowering Time: 10-11 weeks from seed to harvest THC: 23% CBD: Low Height (Indoor): 100cm Height (Outdoor): 100cm For cultivation I used: ------------------------------------------------------ Growing tent Mammoth PRO+ 80: 80x80x180cm 1x circulation fan: 15W 🌬️ LED lighting: Mars Hydro TS 1000 - 150W - vegetation and flowering 💡💡 Exhaust: duct fan - RAMTT100 🌬️ Odor filter: PRO-ECO HF carbon filter 160-240m3/h - 100mm - maximum air flow up to 240m3/h 4x Airpots 11 l I mix substrate: Biobizz Lightmix + Perlite + Coco coir For sale here 👇👇👇👇👇👇👇👇👇: ⚡⚡⚡⚡⚡⚡https://www.zamnesia.com/7653-zamnesia-seeds-apple-fritter-automatic.html ⚡⚡⚡⚡⚡⚡ Thanks for the likes :) See you soon 😍😍
Likes
18
Share
Empecé la germinación el 23/01/23 en un vaso de agua durante 12 horas, después al taper con servilleta húmeda 24 horas más. Radícula de 2cm y las planto en maceta de 1L Actualización estado de germinación 03/02/23: Meto fotos ya con las macetas rellenas al 10º día y fotos del 7º día comparando las macetas y los tallos. En cuanto el 2º par de hojas sea mas que evidente empezamos las semanas de crecimiento. Dentro de 2 o 3 semanas quizás, trasplantamos a maceta definitiva de 7Litros. Lo veremos. Actualización 06/02/23: Meto unas fotos de las plantas mas grandes, 3 días después para que se vea la diferencia de crecimiento. Además un video mostrando el cultivo entero, la luminaria y la extracción. Llevamos 13 días desde la germinación. Actualización 08/02/23: A partir de aquí voy a empezara a contar ya las semanas de crecimiento. Hemos tenido 15 días desde la germinación. Venga va, día 10/02/23 meto unas fotos mas, llevamos 17 días desde la germinación
Likes
21
Share
@PeterSage
Follow
wonderfull colours and smell, plant is looking fine, i see another 2/3 weeks from now, for a full development of the buds. heavy and frequent rain occurring, didn't have to water so much, hope it get better from here to the cut. i am gonna decrease on the nutrients, to make them disappear in 10-15 days and a have a full week on just pure water. the quality of the smell is incredible, very sugar-candy like, not so citric.
Likes
4
Share
@Greenbum
Follow
The grow went great except for the males in the bunch (buying fem next time). Grew incredibly fast during veg which was hard to keep up with if I didn't manage every day. Very leafy and responded well to LST and topping. Fim didn't seem to give as good of a response as topping did. Had a accidental top of about 2 or 3 nodes and every branch underneath just about exploded. I kept the nutes in check (800ish) included with a 6/2 light cycle during veg. The 2 hour night cycles really gave them a chance to recover so my leaves looked pristine the entire grow. Flower she stretched more than expected but the last time I grew this strain was my first time and in dirt.... with a low budget light. The Buds are dense and compact so unfortunately there's no forearm size nugs after drying. Still curing but the "sample jar" is already A+ potency and doesn't taste horrible. 4 days of flush, 5 days dry hanging after wet cut, still working on cure +2weeks. The pictures don't do the trichomes justice, just covered.
Likes
6
Share
@pzwags420
Follow
On day 3 week 3 of flower shes putting out a lot of preflowers and the tops are staring to put out pistils and start of sugar leaves. Im giving a max of 1100 ppfd on tops with an average of 900 ppfd on all tops. Im very happy with the pheno so far and look forward to her expressing her aroma! :)
Processing
Likes
14
Share
All smiles probably the best plant by fast buds I've ran , smells dank going be a nice haul easily over 4 zips best nutrients and lights:) should be done within a month :) drinking water everyday at this point:)
Likes
4
Share
@Autower
Follow
Another day another week and coming along nicely only difference this week is I have started pumping some overdrive through them now seems as it’s week 6 flower. 2 weeks on that then hopefully ready for a flush with pure water and a few days dark then harvest time. I’ve got a feeling the papaya is going to be ready before the cookies waiting for.my microscope for my phone to come then will update with some pictures of the trichomes.
Likes
86
Share
The cold is taking a toll, that’s for sure. Still looking decent but I’m sure I’ll get my fight with this one ________________________________________________________________________ Light from @MarsHydroLED 😎 FC-E6500🔥 730 Watt⚡️💥 2.85 μmol/J🔥 Full Spectrum 🌈 WiFi smart connection 😱
Likes
13
Share
Ottima crescita ora si è un po’ rallentata ma sono sane e belle
Likes
14
Share
@DsTrees
Follow
*** CURRENTLY DRYING *** Dry Date Start: 3-15-21 Trimmed: 3-23-21 Total Dry Weight: 112 grams.
Likes
51
Share
12/30/23 - Day 54 - Hello All! I started this week a day early. I wanted to update everyone on something I have been thinking about a lot. Curing. I feel if there was a hole in my growing skills it would be curing. Last grow there was more than I had anticipated. I was not set up for curing 1 lb. I threw in an audible at the last minute. It worked out but I know I can improve with some trial and error and hands-on experience. So after reading a ton, and going off of some of my prior builds for drying, I came up with this design. I have a controller that will turn the air on and will run when the contents inside the box hit whatever RH% I want to set it at. I think the first week I will set it for 78%RH, then every couple of days go down a % until I hit 62%. The thought is that if the bucket gets above the set RH% then the air will kick on and distribute air across the buds until the RH% is back down to where you want it. It will force the humidity out. I won't need to worry about burping. It will happen on its own.... in theory. Ill update tomorrow with some pictures after the water change. 12/31/23 - Day 55 - Everything is looking good. The water change completed this morning while I was in the shower. Its adding nutes now and will do so over the next hour or so. She is starting to get stinky. I had to add the extra carbon filter to the room. I've got some pics up top of that. Happy New Year! Next time I post it will be in 2024! Have a great night and be safe! Dont drink and drive, your life and anyone else involved in an accident is too important! C' YA! 1/4/24 - Day 58 - I have been thinking of trimming her for a while.... I got a comment on the bushy-ness and I got self-conscious and gave her a trim. Lol I have been going bath and forth for a while and that gave me the push to give her a little trim. She looks great and is growing really quickly. Ill update with more pics as it goes along.
Likes
11
Share
3/28/25 chopped and humidity was a little high starting off 3/30/25 have them drying at 60% and 70° 4/3/25 Still needing a day or so of drying to be at a stable humidity Beautiful plant. Fan leaves with Triched out patterns visibly everywhere. Even though i chopped quite a bit off of the plant, i still got quite a bit bigger yield than i expected. All sizable nugs. Pulled 65 grams.
Processing
Likes
13
Share
@MG2009
Follow
Flushing begins week#8. Water only now, looking for the fade. Will veg longer next time and defoliate. Last pic is a leaf I took of it has 2 calxys on its stem. Next run with 2 plants in this tent should be good. ( plenty of room ) I think the curling up of leave's from low humidity? 48% because I feared getting mould, any thoughts? 02/04/2018 Lost power for about 30 hrs, she has been in the dark with no aeration. Hope she did well update tonight,
Processing
Likes
48
Share
All defolated and flipped today into flower 💚😊🌱
Likes
6
Share
Shit getting heavy in the veg tent but I got too many plants up in there so gna have too make some decisions and start moving some gals in too the flower tent ⛺️ alot of real-estate in there but been stressing this girl topping her defol and I just transplanted her into 3gal pot with roots organic soil