Girls started to flower about a week ago and so far looks good and healthy to me. I have only 20cm space left above the light so I truly hope the stretch phase is getting to the end :) I feel like every grow I have done so far I thought I switched too early and in the end I worry about the space so my next grow will be experiment 12/12 from seed. I have seen very interesting diaries utilising this method so I can't wait to test it. Not much else to mention, standard 2.5 EC (my starting tap water is 0.4 probably due to chlorine?) ph 6.0 humidity is around 55% and 60% during the night, I will definitely get dehumidifier foe the last month, because mould has been my biggest enemy during my previous grows. temp is getting close to 29 celsius during the day. I just ordered some additional clip fans so it hope fully helps to reduce any possible heat stress. I defoliated quite heavily about a week ago and when I finished and put them back, I was a bit worried if I didn't go too hard on them, however just two days ago it was back to normal. Did little bit of defoliation once again today, got rid of some bottom branches and older fan leaves getting no light at the bottom. Really excited about next few weeks, if you have any advice let me know in the comment section. Thanks for checking and have a great day!

2000 ml alle 2 Tage PH-Wert: 6,2 EC-Wert: 2.1 Temperatur: 22ºC Luftfeuchtigkeit 62% Schädlingsbekämpfung: Nematoden PPFD: 510 µmol/m²/s DLI: 33 Düngemittel: Mineralischer Dünger 3,5-6-6 Besonderheiten: Wurden direkt in die erde gepflanzt in einer Kokos-Quelltabletten. -Tag 65 Heute haben wir sie mit 2000 ml Wasser gegossen, versetzt mit 1,5 ml Calmag, 5 ml Canna PK 13/14, 1 ml Plagron Green Sensation und 1 ml Plagron Power Buds. Der EC-Wert lag bei 1.460 mS/cm und der pH-Wert bei 6,2 -Tag 67 Heute haben wir sie mit 2000 ml Wasser gegossen, angereichert mit 1,5 ml Calmag, 6,5 ml Canna PK 13/14, 1 ml HY-PRO Epic Blast sowie 0,32 ml HY-PRO Generator. Der EC-Wert betrug 1.510 mS/cm und der pH-Wert lag bei 6,2 😍 -Tag 69 Heute haben wir den PH wert des Runoff Kontrolliert und er ist leicht zu hoch mit 6,6. Der EC-Wert lag bei 230. Wir haben ihr angepasstes Wasser mit Mikroorganismen gegeben.

Приветствую всех, кто следить за мной. Ваша поддержка очень важна для меня. На следующий день после того как я обновил прошлую неделю дневника наступило время пересадить растения в более крупное ведро. Я покажу вам как использовать дешовые пивные стаканы для пересадки ваших растений. Вы можете посмотреть это на первом видео. Когда я пересаживал растения я дополнительно добавил микоризу в большое ведро. Мои АК-47 показывают сативный фенотип, поэтому они были слишком высоки, поэтому я был вынужден поместить стебель растения как можно глубже и заполнить его, чтобы корни начали расти из него позже. Я также срезал первую пару непродуктивных листьев и побегов с них. Если вам интересно следить за приключениями травки в России.

Pretty good week overall! Day 80, I am posting a little early to coincide with my expected harvest in 2 weeks, and because today I officially started the flush! At this point I am anticipating the harvest between 5 and 14 days from now, depending on how quickly the buds finish ripening up. I am guessing the taller plant has about 75% red hairs and over 50% cloudy trichomes at this point. The shorter plant is slightly behind with maybe 40% of her hairs being red and maybe a third of the trichomes are cloudy. They have made a lot of progress over the past week, so🤞 they will continue that trend. Did a pretty decent defoliation on the shorter plant, due to some fan leaves that were blocking light from the lower canopy turning yellow. I have decided to try molasses with my flush water, hopefully that will improve my final product. One final note is the smell.... it is considerably stronger this time than either of my first 2 grows. Typically I do not bother with a carbon filter, but the smell was so strong it leaked in from my garage and permeated my entire house! So I added filter (and a very strong candle) and it seems to have helped the problem. Super excited for the harvest, will definitely keep everyone posted!

12/24/2021 So far only one male has been identified. Glad I just reviewed my video I didn't even notice how light green #3 is, guess I mix her nutes up separately and see if she just hungry? Or naturally lighter than others. All other plants are using coast of Maine mixed into soil (her too) so I'll give her a little mirimichi 901C this week and see what happens. 12/30/2021 Noticing that there is two distinct differences between these girls, color light green and dark green.#1,#3,#8 are light green and #2,#4,#5,#6,#7 Other than that there very much similar growth and node spacing, little differences but very happy with uniformity.Both light green and dark green maintained their magenta petiols, gonna make notes on stem rub notes next week and see how they will compare.

Toutes les 5 ont germées, 2 moyennes banana+ 1 grosse .(racine) 1 moyenne purple bud +1 grosse et une très petite (racine) Elles ont germées toutes en 3 jours. Puis je l'ai ai mise dans des pastilles de coco et chaque tourbe dans des petits pots en plastique, sur un plateau métallique devant ma fenêtre (je n'avais pas encore de box) du 2 mars au 7 mars.

Tea once a week, ;))))

Update day 10 of transition to bloom this Goofiez 2 it’s soy strong !!

Welcome to week 9 of my Runtz gum by original sensible seeds. Some lovely flowers... Plant is really enjoying the light which is converting its energy into some tasty weed... Lets wait for coming weeks development. Viparspectra discount: Amazon: http://url-9.cn/0y9i Amazon US: https://amzn.to/3e0P2bk Amazon CA: https://amzn.to/3bTnEJC Amazon discount Code: it10smokwiri XS1000 10% XSsmokwiri XS1500 8% it20smokwiri XS2000 5% it40smokwiri XS4000 5%

Early lemon berry might not be early (har har har) but it sure is gorgeous and the scent is 100% lemon berries. This is about to be the best smelling fruit strain I've harvested to date for sure. Ample flower caked in trichomes. Ethos is one of the best and this is proof. 1 bean popped, 1 keeper cut found.

Finally my QB 240W come and it's incredible bright. i flip it to 12/12 this week to make sure the small tent 90 x 90 x 180 not blowing up. after 4 day i witness good stretch from the tree and the temp also decrease to 30 celcius average. I'm happy with my grow so far hope to get 100 gram out of this harvest.

Well I have cutting down the nutes that after this I will start to flush her. I think she still need like 12 to 14 days. But for now she is doing very fine. The smell is amazing and the Trichomes are showing so much! Well see ya next week again.😀

OSS Sherbet Moonrocks 🔹⊱╮🔹╰⊰🔹 GROW Started 03.10.24 INFORMATION 🔹╰⊰´🔹⊱╮🔹 🌞Environment - Maintaining 80F and 65%Humidity 🌾Training - Nothing this week just letting the seedlings veg out. ⚱️2-Gallon 📊6.2 PH 💧 Feeding - Using Horti Grow 8-11-21, Bloom 5-15-26, Late Bloom 0-24-26, Cal 12-0-0 🌞Medic Grow Smart 8 760 Watts 🕷️ IPM - CannControl from Mammoth and Mosquito Bits as needed 🔹⊱╮🔹╰⊰🔹 PLANT UPDATES 🔹╰⊰´🔹⊱╮🔹 📝 Notes - These girls have completely transformed into their new buckets and have started to drink up, increasing the amount of fertigation, (Nutrients and H20), and defoliation to expose the lower growth. 🗓️03.29.24 Maintaining Temps and Humidity - Plants are Looking Great! 🗓️03.30.24 Today fed with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. I defoliated the plants to water them better and the middle growth could get more light and develop. 🗓️03.31.24 Maintaining Temps and Humidity 🗓️04.01.24 Today fed with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. Check out the amazing growth and recovery after the defoliation! 🗓️04.02.24 Maintaining Temps and Humidity, watching these ladies are just nailing the veg phase. 🗓️04.03.24 Today fed with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal 🗓️04.04.24 Maintaining Temps and Humidity, closing out week 2 of veg and these ladies will need to be defoliated again, this new nutrient line from Greenpnaet is killing it, and so easy to use! ╰⊰🔹╰⊰´🔹⊱╮🔹╰⊰🔹╰⊰🔹STRAIN INFORMATION🔹⊱╮🔹╰⊰🔹╰⊰🔹╰⊰🔹⊱╮ Introducing our latest powerhouse Sherbet Moonrocks one of our strongest weed strains to date setting a new bar for potency and effect. A combination of US genetics Sherbet Cake and Purple Moonbow create this potent sedative with THC levels, above 30% that will take you to celestial bliss. An exquisite terpene profile offers a tempting treat of sensational fruity tastes, flavors, and aromas that will seduce your mind and body and take you to a serene place of pure tranquillity. Ocimene, Caryophyllene, and Limonene are the predominant terpenes they produce a wonderful array of sugary berry fruit flavours with floral hints and spicy undertone. Growing these feminized seeds is effortless and straightforward regardless of your growing skills and at harvest time you will be generously rewarded. Plants will mature to a manageable height with a flowering period of 65 - 70 days and will develop thick dense buds glossed in thick layers of THC resin crystals packed with indica power that will lure into a deep relaxation. Expect an indoor yield of 600 - 700 gr m2 and outdoor production of over 1 kilo per plant. Indulge yourself, add Sherbet Moonrocks to your shopping cart today, and explore the outer spheres!

Starting week 4 Attempting to LST two plants Will switch to Flo probably this week Feel free to give tips ! Day 26 : Transplantation + 1, only one plant is a little bit sad. Should be ok the next days

Week 7 for Ztrawberry by greenhouseseedco, End of week 7 for this cultivar, Shes been growing quite nicely. Not too much to report on her just letting them growth vertical now just maintaining the tops at the same quite as well as i can.

my ardent hello to everyone!)) I generally have a weakness for color) and I am especially fascinated by varieties that change color. I really like this visual effect. I had to try to display it in the photo .. (a rather difficult task to convey the entire spectrum of color in the photo) the foxes began to change color not from the surface, but from the back side) and the color very slowly appears on the surface of the leaves .. I imagine what it will become in a few weeks ...

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

Just needing a little more amber to show up. I don't want to jump the gun. Day 83.