The Grow Awards 2026 🏆
Likes
Comments
Share
@Fonzo412
Follow
This will be the start of week #2 of seedling stage. Had an issue 😢 with my blue dream plant I believe I’ve might of over watered . It looks bad hopefully it can recover. Yield may be stunted really lagging behind. Also I have another blue dream seed so I’m thinking of starting that one fresh so I can pot into the finale medium. I didn’t want to use the cup but didn’t have enough soil at the time 🤷‍♂️ The strawberry 🍓 banana 🍌 auto and the power plant fem seems to be doing good 👍 so far. All in all I’m happy 😊 with how things have been going throughout my grow . I’ll will be feeding my plants nutrients and dropping the lights 💡 for the start of Veg next week. Let’s goooo… 😎😏
Processing
Likes
21
Share
This weeks update! Grow tent- so I had a buddy do my res change I talked him through the whole process couldn’t make it to the grow this week. Number and everything where perfect but!. He didn’t close the valve all the way to the blue dream res tank and left the drain pump on🤦‍♂️🏾. So when I got there this week leaves where curling and brown thought it might be a nutrient issue. Opened the res to check it. And there was only about a gallon of water in there out of the usual seven. No major harm I was planning on doing my last defoliation to her this week anyway. But that could have been bad. They are both receiving half strength nutes of the ripening mix GH recommends. Would have been a perfect week if not for that. No harm no foul tho. But def bout to start pushing them on the flower nutes and get back up to my 1000 ppm range buy adding extra bloom formula! #Staykited
Likes
167
Share
🗓️ 5° WEEK FLO // DAY 29-35 (from switch) // DAY 106-112 (from dry seed) ⚡- Light: 30 cm / 250 watt; ⌛- Schedule: 12/12; 🌡️- 22° C - 65% RH average. Unfortunately the last month has been very cold and this has slowed things down a bit, next month should be cold anyway so I don't expect an exceptional yield this time. I'm worried about the root zone: cold is good, too cold means problems; 📑- PH 5.9 - EC 2.3; 💧- That's the 2° week with the same solution. I'm just doing some top up when needed. The phenotype #1 is drinking about 2.5 LT/day, PH is swinging between 5.9 and 6.2. The phenotype #2 is drinking about 1.5 LT/day, PH is swinging between 5.6 and 5.9; ✂️- A new big haircut for them on day 29 flo. Removed a lot of leaves and a few lower branches. Due the lack of stretching I removed something under the net but not everything, so I let at least 30 cm of buds. That's my goal, as always! 🌱- We are in full flowering stage, let's see how things develop. Pheno #1 is doing great so far, a way better than pheno #2. I think we need 4/5 weeks to harvest. 🆕- This week I got the TrolMaster TCS-1 (@TrolMaster_Europe) and I started to track my grow box data. I will add these info once I harvest!
Processing
Likes
49
Share
Day 56 Flowering: We are finally at an harvest window after only seeing the poor fft#8 pulled early. FFT#9 is still giving out lots of new pistils so wants to continue a bit longer . She has some very nice bud stacks that will benefit from another weeks swelling and growth. I decided to end the drought stress and feed again as I could not risk slowing the. down too much at this stage now. She has a lot of trichromes covering her sugar leaves and buds too but they are still fairly clear when I looked at them with the loupe. By the amount of fresh pistils still showing and popping out , she will be good for at least another week and plenty more feeds. This strain is a beautiful smelling and growing beasty. a sure fire winner once released. FFT#10 Has been in the dark for nearly 3 days now and will be trimmed up later for her drying period. She looks absolutely perfect in the flesh amd pics do not do her justice. Nice, fat , long and trich covered colas throughout the plant amd I cannot wait to sample that beautiful candy smelling trich monster. Be safe and Well growmies
Likes
43
Share
Hey everyone . This week she has developed further :-). They look beautiful and are bursting at the seams 😅. The water tank was also completely reprocessed and replaced. Next week something will be cleaned and trimmed below. As usual, it smells very good 😍. I wish you all a lot of fun with the new update, stay healthy and let it grow 🙏🏻👍 You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.5 - 5.8 💦 💧
Likes
92
Share
135 days 3 part harvest 1st was wk 16 430 wet= 97 dry: flowering 60+ days. 2nd part 105 wet= 20g Dry 3rd part well, I got a weight after 5 days of drying. It turned all the white hairs all amber and it actually finished off perfectly. The wet weight was a lot more than I was guessing. I got nearly 55g dry + 3 grams I've been picking up the last 2 days on bits that dried earlier as I hung it in my grow room. RH was 60% temp 21c. Had to remove nodes on the outside to allow the inner buds to dry. 40% was dry on day 3.5 rest took another 1.5 days to dry. This time I didn't over dry it. Still a nice bit of mostiure in it. I'd say the weight wait on this one was 200+ gave back 58Dry.. Was a task doing a 3 part harvest between partly flushing, restarting and then flushing and restarting and then finally I gave her a 10 day flush on flawless finish. She was dying off, showing she was coming to end of life. Really happy with the results of her, nice to get a decent amount of bud from the jars. This 1 plant will probably give more than the other 4. Smoke report to follow soon. Thanks for following, reading and commenting. Be sure to like so I can visit your diaries gottagrowsometime
Likes
9
Share
ALL THESE PHOTOPERIODS WILL GO IN THE 8X8 TENT ONCE THE AUTOFLOWERS ARE CHOPPED AND I WILL SWITCH THE LIGHT TO FLOWER THEM IN THERE FOR MORE ROOM FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
3
Share
@KOKO_B
Follow
I did an aggressive lollipop
Likes
97
Share
@Roberts
Follow
The time has come for cbd crack 1:1. Going into darkness tomorrow, will update harvest video in a few days. It has fox tailed pretty badly, but that is ok. Thanks again fast buds🌱 Update- harvested and video uploaded Time to dry. Thank you grow diaries community for the follows, likes, plus the subscriptions on my YouTube channel. I greatly appreciate the support. Happy growing 🌱🌱🌱 If anyone needs to purchase fastbuds here is a link for my affiliate program, thanks 🌱 https://myfastbuds.com/?a_aid=60910eaff2419
Processing
Likes
4
Share
So the first full week since germinated and putting into final pots has gone by. The stems are looking very weak and thin and one plant actually toppled over. I ended up adding more soil around it to support it better. Not sure what this is due to? I have only been giving plants tap water around 6.8 PH and only when dry up to first knuckle.. which I check normally once in morning and at night. Light schedule is 19/5. Will be changing to 18/6 once my new lights come in. Been running a 19W led strip about 10-12” away from pots. Good airflow to help strengthen stems and not sure what is going on with the leaves discoloring and whatnot. Any tips or advice as to what’s going on??
Likes
6
Share
11/03 - 2x2 (6 clones) 4x4 (11 clones) - 4x4 trimmed and ready for flip this week - 2x2 being trimmed this week and flipped same time as the 4x4 - Only clean water and carbo flush feeds for this week. Drip line emitter added to the 2x2 with a 5 gallon res - each pot has 2 lines. 11/07 - Heavy water flush - Prep for trim & flip - heavy defol - dropping net - clean water feeds till next week - both tents will be flipped at the same time. 11/09 - 4x4 - 2x2 clones running efficiently - Hard defol in the 4x4 - Hard defol for 2x2 coming - flipping both tents on Wed - Hard flush out this week - running high humidity for the next 2 or 3 weeks.
Likes
325
Share
Hello to You all my familly and usual visitors. Thank you for stopping by and all the likes and comments....you are the best! Everything runs smooth, the girl seems in good condition and fattening nicely. The bright2.32 Mars Hydro TS 1000 is kept at 33 cm from the top of my plants is is running on full power. TS 1000 gives a full spectrum of light to the plants and you can see that...the leaves are lush green and develop without any hindrance, Mars Hydro did a very good job producing this lamp. Thanks to Mars Hydro for supplying the necessary equipment for this grow. My diaries are four days late, so it's possible i will update the next week very soon ;) That's it for this week folks, have a wonderful week and please come beck visit in three days time.
Processing
Likes
18
Share
Well this girl has recovered very well she was doing just horrible because I had the lights to low at 22" when 34" was way better . These led lights had me thinking I could go lower then I could ... She is doing great and will be getting the nutrients she needs I'm feeding her a 100% Canadian and organic line that got from a local company .. getting excited to see where we are next week and about do her transplant too. Cheers and thanks for following along .. canna family
Likes
15
Share
Week 2 has gone just as well as I'd like it too! I had an accident during the week where I had dropped a sticky bug trap on one of my girls, this led to me accidentally ripping off a fan leaf and a half, but she seems to have come out of it just fine! (Thankfully). I have been feeding 1/3 strength nutes the past few feeds, stepping it up from 1/4. I will be watering until I see runoff from now on to prevent nutrients from building up in the coco. Update(day 15, 4/12/20) Today I purchased a new oscillating fan, co2 bags and a new hygrometer that hooks up to my phone and shows me stats. The girls have been putting in a lot of work over the past 24 hours. I also had a Purple Punch photo seed sprout today which I may be turning into a mother plant. I will be starting a diary for this girl too. Update (Day 16 5/12/20) Second purple punch photo popped today, going to keep 1 inside and give the other to my mom to take care of. The girls got their first 1/4 dose of calmag today fed at 6ph due to all the nutrients settling there.( I do have ph +/- but I'm going to try run this whole grow at 5.8-6.2. Update (Day 17 6/12/20) Plants seem happy today. Fan leaves producing a the pre-existing nodes are starting to shoot out quite rapidly. Unfortunately, my streets power went out today for ~90 minutes, I opened the tent, windows and doors to get any light in I could, thankfully the power came back on shortly after. I fed the girls today with very little run-off(I'm trying to perfect the amount of water they need). Update (Day 18 7/12/20) The girls have jumped up over night! I wont be feeding today as I'd like the coco to dry out quite a bit more. Update (Day 19 8/12/20 Gave the girls a small feed today with very little run-off Everything seems to be going well so far, I'm very thankful! Update (day 20 9/12/20) Everything is going pretty well today. I will not be feeding as the increased humidity has kept the coco more moist than usual. Will be feeding full strength nutes tomorrow! Thanks for stopping by, HMU with any questions or tips you have.
Processing
Likes
12
Share
Que hay familia, nuestras única variedad con predominancia sativa, bastante vigorosa, flores bastante compactas vemos como van formándose y engordando, desprenden un aroma bastante dulce me recuerda al regaliz rojo. Humedad y temperatura controladas dentro de los parámetros.
Likes
19
Share
@Budha420
Follow
GOOD MORNING VIETNAM😈💚 Week 6 Day 35: Pics from this noon. Mutants main cola is strecthing like crazy😁 like 30 cm in a week. Not as many white pistils as the other 2 girls. Tb; i topped the 2 other ones. I'm lil worried mutant cola will continue streching till it hits light😁 they continue drinking lots of nute water and no complaints yet😎 One love 💚 Day 37: no nute burn!! I was fully expectin bad nute burn when i fed them on 1600ppm😁 but they seemed to be ok with it ä, although i gave them ph water the next day (36). I might be dumb but seeing the girls are not showing any sings of slowing down or nute burning and all checks out, i gave 900ppm feeding. ( All cal w 0.5 ). Colas have starting to see first snow💚 Day 38: Morning fellow greenthumbs💚 Today i defoliated #3 mutant, did some lst aswell. Gave feeding of 1.9 ec ph 5.7. checked runoff and came as 6.3 and ec 1.9 (might be high from 1600ppm feed😂) no signs of lockout or burns👌👌snapped brach yesterday cos forgot not to train after watering🙁 but got it taped up really quickly and seems like it has maked a recovery😇 Day 39: Had quite busy day as i germinated 2 other strains so no pics. Gave girls ph water of 5.9, 1.8L per gal. No news, mutant is streching but 1 and 2 are full flower and fattening sites😎💚 Day 40: gave #3 and #1 feeding and ph 6.3. skipped plant 2 cos pot was heavy and had still lil bit of runoff. Amazing budsite and frostness development! Even the fan leaves are getting real frosty❄️😎 Day 43: All good , giving 5.9ph 900ppm feedings and check runoff. Beatiful snowy tops😍
Likes
17
Share
@Naujas
Follow
it's amazing, this growth looks much better than my first attempt, my decision was to put a smaller pot and change the light - the girl really liked it, FastBuds goriilla cookies with a small space manage perfectly:).
Likes
Comments
Share
Aún las tenía metidas en casa por la noche, por qué las plante en pretemporada y no quería que se congelarán.
Likes
41
Share
gave them a potent compost tea Starting 4th week of flower
Likes
116
Share
Закончилось долгое увлекательное путешествие, мне даже немного грустно. В этот цикл я впервые попробовал технику мэйн-лайниг, надеюсь моя работа вам понравилась, я старался чтоб куст получился красивым. Хочу сказать спасибо сервису GrowDiaries - это уникальная база данных по выращиванию от тысяч гроверов со всего земного шара. Я, в свою очередь, в этом дневнике стрался очень подробно описывать и фотографировать все свои действия, возможно мой опыт также кому-то будет полезен. Отдельное спасибо всем, кто посетил и комметнировал мой дневник - вместе мы совершенствуем наше мастерство. 👉Забавный интересный факт👈 На приготовление компота для полива за весь цикл выращивания было использовано 241 литров воды 😉 Спасибо, что были на связи, и будьте здоровы! 🙏