Hi meine lieben, 🤗 Die 2. Woche der Wachstums-Phase steht an... ..und die realität schlägt zu. Hatte versucht diesen Run mit einem höheren VPD-Wert und dadurch ohne zusätzliches CalMag hinzufügen zumüssen laufen zulassen. Da laut einer Studie, man durch einen erhöhten VPD, kein zusätzliches CalMag unter LED's hinzugefügt werden müsste. Allerdings gieße ich noch mit Leitungswasser. Also hatte ich mir mal die werte meiner Stadtwerke angeschaut. Und in meinem Wasser habe ich Calcium = 78 mg/l und Magnesium = 5,3 mg/l und somit ein verhältnis von 14:1😰. Was von einer Optimalen versorgung von 2:1 - 4:1 CalMag etwas entfernt ist... 😅 Beste Lösung wäre ein Filtersystem wie der Watertrim zu nutzen. Günstiger ist es Mono-Magnesium (oder bei bedarf Mono-Calcium) zu besorgen und das Wasser im richtigen Verhältnis auszugleichen. _________________________________________________________ Optimale CalMag-Versorgung in den einzelnen Phasen: Sämling: Cal: 50-60 mg/l Mag: 20-30 mg/l Wachstum: Cal: 80-100 mg/l Mag: 30-50mg/l Blüte: Cal: 100-120 mg/l Mag: 40-60mg/l ______________________________________________________________ Wie mein Ablauf in dieser Woche genau aussah, habe ich auch diesmal für uns Dokumentiert. Ich wünsche dir viel Spaß & Happy Growing 🌱🤗: _______________________________________________________________ Umgebungswerte der Woche: - Temperatur: 25°C - Luftfeuchtigkeit: 65% - VDP (Room): 1,1 _______________________________________________________________ Tag 8: - Nur beobachtet 😋 Tag 9: - Pflanzenhöhe gemessen: 20cm 🌱 - Stamm-Durchmesser gemessen: 0,44cm = 44mm Ø - Licht Intensität eingestellt - PAR - PPFD: 320µmol / DLI: 21 Mol Tag 10: Bewässert 👇 (Leitungswasser): - Volumen: 1000ml - PH-Wert: 6,15 - EC-Wert: 0,46 - Temperatur: 20°C Run-Off (Drain) gemessen 👇: - PH-Wert: 6,7 - EC-Wert: 3,6 - Temperatur: 21°C - Volumen: 220ml Tag 11: - Nur beobachtet 😋 Tag 12: Bewässert 👇 (Leitungswasser): - Volumen: 1200ml - PH-Wert: 6,1 - EC-Wert: 1,52 - Temperatur: 20°C Run-Off (Drain) gemessen 👇: - PH-Wert: 6,7 - EC-Wert: 3,2 - Temperatur: 22°C - Volumen: 260ml Pflanzen Training: Topping, Vor-Lollipopping Lampenabstand eingestellt: 50cm Licht Intensität eingestellt - PAR - PPFD: 300µmol / DLI: 19,5 Mol Pflanzenhöhe gemessen: 22cm 🌱 Tag 13: - Nur beobachtet 😋 Tag 14: Bewässert 👇 (Leitungswasser): - Volumen: 1200ml - PH-Wert: 6,1 - EC-Wert: 0,48 - Temperatur: 21°C Run-Off (Drain) gemessen 👇: - PH-Wert: 6,4 - EC-Wert: 2,95 - Temperatur: 21°C - Volumen: 160ml Pflanzenhöhe gemessen: 25cm 🌱 Stamm-Durchmesser gemessen: 0,67cm = 67mm Ø Lampenabstand eingestellt: 40cm Licht Intensität eingestellt - PAR - PPFD: 350µmol / DLI: 22,7 Mol

June 25 - transplanting to 35 LT pot! 💣🔞 June 27 - LST&HST Day! 💚 June 28 - The plant is growing great and fastly! 🛫

This lady is killing it so far! Another beautiful pheno of Mimosa EVO by Barney's Farm, It's a pleasure to work with their genetic, this plant looks absolutely gorgeous, I hope that she performs well under the Spanish sun this season, we can have very high temperatures but I think this lady is gonna handle the summer without any issues, let's see how this lady keeps developing guys!!

Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

Common soon

Week 8 begins for LSD and Green Crack. These ladies are getting close to the end, there was a lot of yellowing leaves on each plant, so they were removed. Not much else to say. Thanks for stopping by growfessors 👽🌳💚

Die Babys starten in die 9. Lebenswoche. Ich habe nochmal einiges entlaubt um möglichst allen Budds Licht zu gewähren. Die sind echt sehr Dicht, Steinhart und wahrscheinlich brauchen die Babys noch gute 2-3 Wochen 🙏🏽 Bin echt gespannt, der Geruch der Terpene ist auch soweit Top aber nicht mehr das was es früher einmal war, jetzt hat es den typischen Runtz Geruch, süß und fruchtig, früher hatte barmend Farm Cali Runtz und die Terpene waren eher Pinie 🌲 Bin trotzdem zuversichtlich auf Fette und Qualitativ hochwertige Ernte 😍

The green sensation product is doing magic you can see that they love this 😍🙏

Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.

Its taste is so amazing this round

Look what I did to my girl, poor lady. But i'm sure she will bounce back, but with all that leaf shit It's hard to properly tie them down. So i broke off a total of 2 branches (yellow tape) and managed to attach one back to it. Otherwise she took all the stress LIKE A CHAMP - yet. We'll see. To be honest, i was quite lazy with her the last days, it was pretty stressful but look at her, she is basically growing herself! As long as you can cool it, have some sort of system to change water and some, basic nutrients and ph- DWC is the easiest system for me, 100% Look at the roots and i did not fill up the reservoir for like half a week, so a lot of it wsd exposed to air for a longer time still she is growing and growing. Two more weeks and i might have a problem with her in flower, because she will drink so much water the reservoir won't hold a long time haha. Almost forget, i need to add either more fertilizer /ml or give extra calmag. will probably do both kekw Cheers guys! (whoever reads this, this is your sign, get high 👌)

🍓🍌 No trainin No toppin Jus test run

Lights off for 28 hrs, because of a North Easter, looks good gonna break out my 420 scope tomorrow, and check trichomes, 8-10 week strain. Hopeing she is close. 03/07/2018 Trichomes mostly clear some are cloudy, maybe 1% Amber. More flushing,perhaps another week of flushing,as haven't noticed any fade? 10-14 lights should help hastening ripeness.

Day 52-64 (Day 54) I’m going to thoroughly inspect each plant and remove bananas if found. So far it’s only been the one on #7 but I don’t want to take a chance. I’m also going to give a watering with some runoff. (Day 55) Can’t find anymore bananas but that one. I will probably find a few bag seeds but who knows. It’s way too late for pollen to really have effect anyway. These 5 plants finish nice and early compared to my other tent flipped on the same day. I would never take this strain 65+ days like last time. I would do 56-60 days next time I flower this strain (Day 58) Holy shit this tent is fading like crazy now. They are starting to show some beautiful autumn colors. #1 #5 and #7 are definitely done. #3 and #6 could use a little more time so I’ve decided to take them down on the 24th. I haven’t seen anymore bananas and the one that popped out on #7 has shriveled up and receded. (Day 63) I’m seeing what look like seed pods starting to form in some of the main colas on my picture perfect pheno. #7 is showing 3 or 4 little bananas too. All of the top buds are definitely done so I’m going to harvest as soon as the lights come on tomorrow. I’m going to give one last watering right now and then harvest. I’ve noticed that harvesting a watered plant will extend the dry time by a few days and that’s exactly what I’m looking for. A nice slow dry. Plants are being full plant hung + dry trimmed and tent is being kept at 60-65 degrees and 60-65% RH. Cutting everything down was a pain in the ass. I had to individually cut each square the scrog net so it wouldn’t contract and squish all the buds. I chopped down my other tent as well so I have no other plants in flower right now.

Strain Links Oben : Super Lemon Haze Strain Oben Rechts : Break Pad Breath Strain Mitte : Auto SFV OG Strain Unten Links : Lemon Orange Strain Unter Rechts : Velvet Moon

Did LST and topped Pheno 1 & 2, 3 is too funky to mess with. I think PH was just my issue and possible too high intensity light as I lowered to 60%, but also brought my PH to 6.5 so I'm guessing that helped too.

Habe insgesamtit 2 Strains und 6 Pflanzen 500 Gramm geerntet

- Water: tap water at 300 PPM, I add 0.6g of Hybrid powder and 0.4g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I water every 2 days because it is too wet, I water until the water runs out of the pot (to release the nutrients from previous waterings) -Daytime temperature: 21-26°C -Night temperature: 21-23°C -Humidity: 55-80% :/ too high -Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation 5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits https://www.mars-hydro.com/?acc=hou-stone