Z

29.3.25: This week has flown by. Everything is looking good. I've been watering alternatively with Bud Explosion PK booster and Sea K(elp) by Greenleaf nutrients. Also, plain water I'm between feeding. I watered yesterday and had run off from 2 pots, so I will wait for them to dry out sufficiently before watering again. Trying to mitigate the risks of mildew and / or mould due to too much water / humidity. 31.3.25: I cleaned out the tent and disinfected it again. Had a bit of runoff, which had left a bit of residue on the floor. Today, I took all the photos and videos whilst cleaning the tent. The pots had sufficiently dried, so I will water with the Greenleaf nutrients. I watered with dechlorinated water PH'd between 6.2-6.4. 6.5 litres contained the following nutrients: ♡ 1/4 Tsp Mega Crop Part A. ♡ 1/2 Tsp Bud Explosion PK booster ♡ 1/4 Tsp Sea K(elp). (All by Greenleaf nutrients). Thanks for hanging out 🍃 ✌️ 💚 🙂

The little one is catching up and the bigger one is starting to fill out the net

First grow finally done! . I battled a lot of inconsistencies with my environment and watering schedule. Despite this, and my big top gun growing pollen sacs, I had a great grow, and seedless buds! Top Gun 1 Gal harvested 25 grams dry Top Gun 5 Gal harvested 60 grams dry I really enjoyed the 1 gallon a lot more, easier to manage and rooted up the whole pot, going to try 3 gals next grow.

Bin so hyped!🤩🤩

Por fin se empieza a ver algo de engorde, los cogollos están compactando bien y de resina, a pesar de las altas temperaturas, van bien servidas. Principio de la 5ª semana de flora.

Thanks for all the Help and experience you growers share with us 🤝 It is a big help for me!! Never thought growing your own medicine will be that hard cause you never know how the plant will act. But Overall I love it! Hope you guys enjoy my first Rollercoaster ride with this Grow! Happy Grow to you all! Switched to a 250W HID for constant temperature.

Final painting and floor trim completed. Walls are white and bright. I started to construct the main flood table. It is made of 2x3's and a sheet of chipboard. I fastened some rails at the perimeters and used caulking to seal all gaps. I will coat the face of the chipboard with a polyurea flat roof coating to make it completely watertight. I have 1/4 : 12 slope on it right now so that it drains to the reservoir end. I stained the sides of the table grey to match the floor trim because ambiance matters Shelves are up to hold my nutes/test pens/genetics/nug/papers/etc... I brought in one of the 3 HLG 550 clone qb's to test for light as I have never seen them in action. WOW!! Having one running is quite intense, I cant wait to see what all 3 going over the 4x10 area will look like (with shades on of course) A minor adjustment is needed to the height of the A/C exhaust vent. It is currently too high by 2" and needs to be lowered. Kind of a pain in the ass, but needs to be done for the table to fit snug. Previous total spend $2430 This weeks spend = $50 (hardware) $165 - killer deal on ebay for 8 inch fan/filter/ducting. open box, new

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

[DAY 78] - 12/12/2022 - TS1000 40 cm distance - 100% dimmer: 144 watt; - Light cycle 20/4; - Height: 74 cm from clay (the other one is 83 cm from clay); - 24° C - 60% RH during light - 19° C - 70% RH during night; - EC 1.7- PH 5.9. [DAY 79] - 13/12/2022 - 24° C - 60% RH during light - 19° C - 70% RH during night; - EC 1.5- PH 5.9. [DAY 80] - 14/12/2022 - 24° C - 65% RH during light - 19° C - 80% RH during night; - EC 1.4 - PH 6. [DAY 81] - 15/12/2022 - 22.5° C - 73% RH during light - 19° C - 80% RH during night; - EC 1.4 - PH 6.1; - Defoliation. [DAY 82] - 16/12/2022 - 22.5° C - 70% RH during light - 20° C - 80% RH during night; - EC 1.4 - PH 5.9; - Pretty fine, some spots here and there on the leaves. [DAY 83] - 17/12/2022 - 22.5° C - 70% RH during light - 20° C - 80% RH during night; - FLUSH EC 0.3 for 24 h. [DAY 84] - 18/12/2022 - 22.5° C - 70% RH during light - 20° C - 80% RH during night; - EC 1 - PH 6.

The purple lemonade is flowering nicely the buds are showing purple already and the gorilla cookies auto is flowering it has very tight node spacing which will mean bigger and fatter buds my tent is smelling great at the moment it will intensify as they grow

Start of day 70 ...... Dec 18 Start of week 10 ........ 44 DAYS INTO FLOWERING ( SMELLING GREAT ) !!!!!!! Check out the full grow video on latest weekly update Super Exceptional Growth Daily Still adjusting LST when needed and leaf tucking....... Water Only when needed but its drinking more every otherday and adjusting lights when needed...... Rain Water Only ....... ( DAY 26 AND BOTH NL 1 & NL 2 SHOWED PREFLOWERS ) ( DAY 49 AND RESIN PRODUCTION HAS STARTED ) ( DAY 57 , EQUIPMENT FAILURE , main FAN , over heated😡 tripped breaker , reset light timers , lost a DAY, REPLACED new Main Fan 😁 back up running 👌) ( DAY 70 AND IT SHOWS A SLIGHT DEFICIENCIE MAYBE A CAL/MAG GETTING CLOSE TO END OF LIFE ) IM ALSO DOING VERY LITTLE, SLIGHT DEFOLIATION ( DAY 70 DID ITS FINAL FLUSHING TODAY TO GET RID OF ANY BUILDUP ) ( DAY 75 AND ALL IS GOOD , THERE FATTING UP ) I hope you enjoy my growlog...

Day 70.. So excited to harvest her next week!! This pheno is completely different to my previous fastberry, this one is super super dense. But her odour is identical, so im interested to see what shes like.

It has been raining and raining since whatever... 2 weeks....checked the trichomes nice milky white. Based on the fact the the weather won't be better and also the temperature is lower day by the now usually 6 Celsius degrees in the evening and 13-16 during the day or less, I decided to harvest next week. I was thinking to let her out 3 more weeks just to have more amber trichomes but she is OK, ready but this weather is not ... She is sativa dominant as I saw in the breeder's description so totally cool. So she ain't gonna be maturing that much she reached the point.... especially because no sun.... ... but compare to that she has som nice colas so I am excited let's see soo guys. Thanks all of you checking this progress out. Beautiful lady, large LST made her really nice literally she looks like more plant but yes ONLY ONE PLANT IN THE PICTURE AND THE GARDEN :) Have a lovely day :)

Thanks to Creepy_Steeve for the legendary tips, in this diary he guided me to remove a shell that was stuck on a seedling, now it has become one of the biggest plants in the crop 💪🙏 Flowering begins.I did defoliation on the lower tiers on day 4 of flowering ------------------------------------------------ Water: tap water at 300 PPM, I add 0.7G of Hybrid powder per liter to reach 800PPM and I adjust the PH to 5.8. Currently I water my pots with about 1.5L of water every 4 days -Daytime temperature: 27°C -Night temperature: 23°C -Humidity: 45-65% -Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 2/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation 5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits https://www.mars-hydro.com/?acc=hou-stone

This weeks a little early, wanted to show the cut. Going to flower in 1-2 weeks depending on how she recovers.

So I finally have time to finish this review. The buds cured now for over a month and I consumed them a lot because I simply don't want to smoke something else. The details are in the strain review but to make it short: 10/10 high, 9/10 taste, 0/10 grow (she hermed).

WEEK 2 DAY 14 Since last week the babies have taken off! They didn’t have much light until yesterday when I added another 100w led and since then I’ve seen a huge difference ! They are looking super healthy the roots said fuck the pot and grew right through it I’m actually super interested in seeing how these grow up.. The 3 clones that were separate last week are now moved into one single pot to further develop the experiment. They are on the same feed as the mother with flora grow/micro/bloom and cal-mag . And In the last picture you can see my ghettos man way of cloning .. going to see which 2 out of 4 are better rooted and I will move those to a pot in about a week or so. If you guys have any questions or want to know where I got these exotic seeds message me!! Or comment below !

These ladies were a treat to grow and even better to smoke, looking forward to my next run 👌🤙