Likes
Comments
Share
CBD Star bud seem to be thickening up despite obvious signs of deficiencies, likely due to a pH induced nutrient lock out. Phosphorus, nitrogen, calcium, manganese, molybdenum? It’s basically the periodic table of deficiencies. Main cola started to turn purple due to molybdenum deficiency? Found a spider mite on Cheese… sprayed the leaves down with a 1:10 alcohol:water solution which seems to have taken care of the mites.
Likes
Comments
Share
She looks stunning at the beginning of the 5th week of flower, amazing sweet aroma, very densd buds, beautiful purple colors, it's just a dream, super sticky, just awesome, it's being an absolute pleasure to grow her, love this strain, let's keep on working and let's see how she performs at the end! Peace gardeners! 💚 🌱 ✌️ 💎
Likes
15
Share
Plant is growing well. First 2 sets of leaves had deformities so had me worrying but another growmies from here told me totally normal for first set of leaves today I have started using biobizz bio grow feed following the feed chart of 2ml per litre of water the only thing I am struggling is how much should I water my plant currently watering 100ml - 170ml. Per 5 days But other than that she seems to be growing nice and healthy. And strong I was advised to tilt my fan towards my plants a little to help with oxygen and to help stiffen stems ! So I have done that I am wondering when I should start low stress her And is she the right size for her age
Likes
21
Share
@BLAZED
Follow
W17 (23-5 tm 29-5) 23-5 Temperature: 23.9 degrees (lights on) 19.2 degrees (lights off) Humidity: 59% (highest) 47% (lowest) Watering: None. 24-5 Temperature: 24.5 degrees (lights on) 19.2 degrees (lights off) Humidity: 67% (highest) 47% (lowest) Watering: 1000 ml. No pictures. After some waterings without any NPK nutes, the leaves are still very green, this indicates there is still enough nutrients available in the soil. From now on the last 1.5 weeks of flower i will only give RO water with an PH between 6.3 and 6.4 25-5 Temperature: 24.4 degrees (lights on) 20.4 degrees (lights off) Humidity: 67% (highest) 50% (lowest) Watering: None. 26-5 Temperature: 24.9 degrees (lights on) 19.1 degrees (lights off) Humidity: 67% (highest) 45% (lowest) Watering: 1000 ml. No pictures. 27-5 Temperature: 24.2 degrees (lights on) 20.5 degrees (lights off) Humidity: 69% (highest) 40% (lowest) Watering: 1000 ml. 28-5 Temperature: 26.1 degrees (lights on) 20.9 degrees (lights off) Humidity: 69% (highest) 40% (lowest) Watering: None. 29-5 Temperature: 25.5 degrees (lights on) 20.2 degrees (lights off) Humidity: 70% (highest) 46% (lowest) Watering: None. The buds are swelling nicely, are full of THC and smells very intense like candy. I cant wait to see the end product!
Likes
48
Share
Just starting week 6 and These girls are starting to get some smell finally . This is the same strain as my other big plant but I learned that this strain doesn't like to be over fed so I have been feeding these 4 plants a light feeding but the two plants in the back are showing they are hungry so this feeding today I upped their food . Checked the soil ph and it was in at 6.4 . Defoliated a few of the big fan leaves that were blocking the buds down the stalks and its looking pretty fat. Also the trichome production is much farther ahead then my big plant at this stage . The small leaves are covered in them . Still have about 4 to 5 weeks to go .
Likes
12
Share
@Roberts
Follow
Mint Runtz automatic is doing good. She is growing fast. She should be going into flowering this next week I don't see any pistils yet. Hopefully a good stretch is to come. I want to get some use out of the under canopy Saturn 240 light. Everything is looking good. She is likely due for a solution change soon to a more blooming mix. Thank you Spider Farmer, Elufah, and Spliff Seeds. 🤜🏻🤛🏻🌱🌱🌱 Elufah (Power by Growpros solutions) UAP1500,Die-cast radiator and featuring an optical lens design(Uniform PPFD),150W,PPE3.0μmol/J,PPFD1500umol/s/m²,Use the verified commercial-grade spectrum;Full/Epar Boost Spectrum adjustable,A very excellent grow light; By entering the discount code, you can enjoy an additional 10% price reduction when making the purchase. Amazon discount code:SAVEURCASH10 product Link:https://a.c1ns.cn/uap1500 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g.
Likes
17
Share
Vamos familia actualizamos la cosecha de las Purple OG KUSH de Dutchfem . La verdad que el secado muy bien 7 días en Malla y a los botes, 40% humedad y 24 grados es la temperatura ambiental que han tenido en el secado. Por lo demás de miedo os la recomiendo. Gracias a DutchFem, Agrobeta y Mars hydro , sin ellos este proyecto no sería igual 🙏. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Buenos humos.
Likes
58
Share
Flowering day 37 since time change to 12/12 h. Hey guys :-) The buds have developed incredibly nicely this week. The smell is getting more and more extreme :-) . The whole plant itself looks perfect 👍. The growth has slowly stopped as the full energy goes into the production of the buds. This week it was watered 3 times with 1.2 l each (nutrients see table above) They were individually inspected and checked for their health. Osmosis water for the coming week was refilled in a 100 l tank 👍. Have fun reading the diary and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.thegratefulseeds.com/shop/feminized-seeds/limited-edition/blue-javaz/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany
Likes
28
Share
Que hay familia, vamos con la sexta semana de floración de estas Apple Fritter de Zamnesia. La temperatura está entre los 21/24 grados, la humedad está entorno al 55%, y el ph lo mantengo ahora al principio en 6.2, el foco por supuesto está enchufado 12 horas , estan creciendo bien fuertes. Y aparte añadimos nutrientes de Agrobeta, que no puede faltar semejante gama. Todo correcto hasta ahora, ya empiezan a formarse las flores y ya están produciendo tricomas, estas próximas semanas veremos cómo avanzan. Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Hasta aquí es todo, buenos humos 💨💨💨.
Likes
2
Share
Likes
11
Share
@CalGonJim
Follow
12/5 did some LST yesterday the first time I tried it she’s responding well I’m going to continue nutrients at half strength and that’s all for now 12/6 there are more bud sights on this than I’ve ever seen on any auto flower. I’m already seeing a lot of crystals in the leaves she’s responding well to the LST and I gave her a 1 mL per liter feeding of nutrients with 2 L of water I’m trying to be very careful. I have been using SF1000D lights I bought them a few years ago,they’re not bad they do get hot, especially when I’ve tried to put two of them in one tent it is very difficult to keep cool. Viparspectra I’ll keep it running at 80% and that should be good enough for one autoflower, I got the XS1500. I want to see if there’s any difference in the newer LEDs compared to my older Spider Farmer lights . I found a discount code in one of the discussions here in the site somewhere, and it actually worked it came to about 145 total. It’ll be here tomorrow. 12/7 💎💎💎 I love this seed company. This plant that I topped between three and four and did LST two days ago on is showing me bud sites that are fuller and more full of crystals that I’ve ever seen. this is my 10th Autoflower, my first one from this company and it’s completely different, way better, it’s just phenomenal. I like a clean and symmetrical and even grow. Doing this will make it much easier to process. I’ve never seen a plant grow like this. This is my first time trying LST and I’m glad I did it. It completely changes the plants you can definitely see there will be much more. 12/7 she looks great. because I spread the branches out the way I did, and only have one light on the leaf surface temperatures and the bud surface temperatures are all between 72 and 74° which is perfect. 12/8 Resin production is incredible. it looks like millions of tiny angels jizzed all over my plant it’s the most beautiful thing I’ve ever seen 12/8 I got the new Viparspectra light today. It has about 100 more LEDs in the SF 1000 D I’ll take some magnified pictures of the LEDs. The new one is much heavier I like the dimmer that way I don’t have to put in secondary lights for seedlings. It’s not a bad light I like being able to dim the light I ran it at 100% and the temperature was a little hot for me and I’m keeping it kind of close to the plant so I’ll probably lower it down to 75% and that should be good I think. Also I noticed that this one Viparspectra light looks to me brighter than 2 sf100d lights. 12/9 I turned the Viper spectra light down to a little bit less than 75% to bring it down to 100 W. When I did that the temperature stays around 95° on the board and about 98° on the driver, so it is far cooler and more efficient at the same wattage than the older spider farmer lights which were at 110 to 118°( about the same as the XS1500 at full power). So a single 150w xs1500 is about the same as 2 SF1000D lights as far as heat I'm sure the PPF or whatthehelleverthatis is higher ,very nice, If the SF1000D's would have had dimmers they would have been perfect. 12/10 awesome 🤩 12/11 I am seeing lots of resin production more than I’ve ever seen. I think this is so far been my best most successful grow this plant is great. I’m glad I found the seed company. The other ones I used before were pretty bad, I don't LOVE them at all. Also my Yamaha A4A 1600 receiver is total junk, I mean total... I'll never have the money to spend on something like that again, I was totally ripped off. Unrelated but so many formerly trustworthy companies are just TOTAL garbage
Processing
Likes
14
Share
@stevieb21
Follow
Things are coming along OK this week. Maybe I spend too much time with them but it just didn't look like much was happening this week. I am dealing with a bit of leaf burn from the LED so I moved it up to 48" and the plants seem to be responding better now. It could be it was getting too much stress from the light intensity. Will see how the next week goes. I was hoping to hit it again with Ton-O-Bud but I'm not sure it will be a good idea now that I'm a little behind. I'd almost rather start the finishing nutes for the Indicas but will see how the plants look when that time comes.
Likes
4
Share
Start of week 6, day 45, 7th oct. All topped, and have had a problem with little caterpillars, switch to flower soon, so far so good.😜
Likes
28
Share
Shooting powder added to the tank and buds still swelling nicely. Looks like a great yield for under a weeks veg.
Likes
54
Share
@RastaGrow
Follow
Greetings Rastamans, as you can see my girl is getting thicker and is growing weekly. Every used fertilizers have very good results. Slowly aproaching the time of harvesting, This is evidenced by the trichomes as well as the timing of the flowering cycle. I believe that the harvest from this plant will be great. Use of the necessarry techniques at the right period of times gave me the results that you see yourselves. It is the last day of lighting. It will be in dark for 36hrs. Also today defoliation will take its place and I have already splited main stalk. hope you get enjoyment and also knowledge from my diaries. Wish you all good luck. Yours trully Rastagrow
Likes
12
Share
Plantas saudáveis, ótima qualidade, estão reagindo muito bem a alimentação, regas todos os dias e alimentação todos os dias,.cheiro doce
Likes
26
Share
Dear Growers , Welcome to Week 6 or Flower week 3 // Day 42-49 from Sweet Seeds Permanent Jealousy Xl Auto. Incase of Moving to a New Home . I Decided to skip 3-4 Weeks from every Diarie of the 12x12 Automatic Project . Everything should be Normal in the next Weeks . Whether you're a beginner or an expert, you are warmly invited to join, ask questions, and share your own experiences along the way! Project Setup & Conditions: • Brand/Manufacturer: Sweet • Tent: 222cmx150cmx150cm • Light: 2x 720 Watt Full Spectrum • Humidity: 50% • Soil: Narcos Organix Mix • Nutrients: Narcos Products • pH Value: 6 If you want Germinitation results like mine , check out Kannabia Seeds with my link [https://www.kannabia.com/de?ref=61966] and grab the germination device or the strains I used . Trust me – it’s worth it for sure ! Get another 20% Discount at all products using the code [GGD] at the Checkout . Stay curious and keep up Growing —we look forward to welcoming you back for the next chapter soon!
Likes
6
Share
@Xpie77
Follow
Kweekverslag Week 3: Cheese van Seeds Genetics Datum: 18 maart 2025 Het is weer tijd voor een kweekverslag, en dit keer over mijn Cheese-plant van Seeds Genetics! Week 3 is voorbij, en het is geweldig om te zien hoe deze soort zich ontwikkelt. Laten we eens kijken naar de details van deze spannende week. Groei en Ontwikkeling: In week 3 is mijn Cheese-plant flink aan het groeien! De bladeren zijn robuust en hebben een heldergroene kleur die doet denken aan een weelderig weiland. De internodes beginnen mooi te verlengen, en ik zie al enkele takken zich ontwikkelen die veelbelovend zijn voor een goede opbrengst. Het is echt een plezier om naar te kijken terwijl de plant zich zo goed ontwikkelt. Voeding: Ik heb de voedingsstoffen zorgvuldig afgestemd op de behoeften van de plant. Deze week heb ik een combinatie van stikstofrijke en kaliumrijke meststoffen gebruikt om zowel de vegetatieve groei als de bloei te stimuleren. De Cheese-plant lijkt deze mix te waarderen, want de bladeren stralen gezondheid uit en zijn stevig. Licht en Temperatuur: De lichtcyclus blijft op 18 uur licht en 6 uur duisternis, wat optimaal lijkt voor deze soort. De temperaturen variëren tussen de 21-24°C, wat ideaal is. De luchtvochtigheid heb ik rond de 52% gehouden, wat perfect lijkt voor de groei en voorkomt dat de plant uitdroogt. Training: Ik heb deze week ook begonnen met low-stress training (LST) om de takken in bedwang te houden en meer licht naar de lagere delen van de plant te laten komen. Het is ongelooflijk om te zien hoe Cheese zich aanpast aan de training. De takken zijn al begonnen te groeien, en de naastliggende scheuten krijgen ook meer kans om zich te ontwikkelen. Gezondheidscheck: Tot nu toe is alles gezond en in topconditie! Er zijn geen tekenen van plagen of ziekten, en de bladeren zijn vrij van vlekken of andere afwijkingen. Ik controleer regelmatig op eventuele problemen en zorg ervoor dat ik de plant goed water geef. Conclusie: Al met al was week 3 een fantastische periode voor mijn Cheese-plant. De groei is indrukwekkend, de geur begint zich te ontwikkelen, en de plant voelt sterk aan. Ik ben benieuwd naar wat de komende weken zullen brengen en kijk ernaar uit om meer updates te geven! Tot volgende week! 🧀🌱