Super stoked for last week, watching her flower is pretty incredible, so from pretty much week 9 of veg up till now I've been feeding her half strength base nutrients with fluctuating strengths of sensizym and Cal-Mag always mixed with 8L of basic filtered water. Update January 5 2020. Back from my fishing trip! Happy to say that everything with the durban is going swimmingly, I fed her today 8L with half strength base nutrients and half strength of sensizym. I will probably do one more feeding with sensizym and call it good.. in two-three weeks I will start adding my Overdrive nutrients to my base. January 11 update: Not much going. Just playing the waiting game now. January 13 update: its gotten really cold here, like -37 with wind so I put a ceramic heat emitter back in, now back up to 250w heat running 24/7. Growing in an unheated shop is definitely a challenge! But with the other one in things are picking up and shits drying out finally. Should have put the other heater back in a week ago. My bad. January 15 update: -37!! Holy fu*ck, fed her 3L of mixed nutrients at half strength. With just a splash of overdrive. January 17 update: outside temps finally warming up to -25°c yay!! Inside grow box temps up to 28°c she likes it warm, Fed her the remaining food I had mixed up, she got about 5L. Seeing fattening of the bud sites👀👌 January 19 update: No idea when this happened but it did.. got a crack right at first top. Now I know to leave more of stem above where it splits off into two. Quick tape fix till I figure it out, fed her 5L of mixed food with just under full strength OverDrive and some organic growth plus.. it has a high pk so I'm using it once. More updates to follow. Update pictures daily!! Happy growing everyone!🌱👍 Stay warm my Canadian friends.

Ok so this week I did a defoliation and a tigh down too the netting , I really was not planning on doing such a big defoliation but the leafs became thick and dense and there was almost no light penitration down too the lower branches of the plant , so she is opened right up now and the humidity and temperature has dropped loads and the air is moving alot better around the leaves and branches , I will not take anything more off her now , I have also added Cal mag too the nutrients for this week only , she is well into pre flower now but the stretch has not yet started so I figured it's no or never too defoliate and tigh them down , this grill really has grown right out this week and is unrecognisable from the plant just a few days ago , I am very happy with them so far and being new too all this it's all very exciting , Thanks for looking :)

🌱 Week 1: The Journey Begins! 🌟 Hey Grow Fam! 🙌 We’re off to an epic start with our TrolMaster adventure, and I’m already feeling the love for the setup, the seeds, and the growth happening in the room! So, let’s dive right in and get into the details of this exciting week! 🌿 Germination Update: Our first Gorilla Melon seed from Fast Buds didn’t sprout, but no worries—round two was a success! 🦍🍈 The second seed has germinated and is looking full of potential. I’m throwing in a Sweet Seeds Papaya Zoap into the germination station too, so we’re keeping this exciting lineup going strong! Germination is such a key part of the journey, and having a healthy start is what it’s all about. 🔧 Room Build & TrolMaster Setup: The build is coming along beautifully, and I gotta say, the TrolMaster system is blowing my mind! Everything’s under control like magic 🎩✨, and the TM+ app? Wow, just wow. I mean, I can literally be in the bathroom and still keep an eye on the plants—check all the metrics, adjust settings, and fine-tune what I need, all from my phone! 😂💧 This level of control is next level. I’m loving how smooth and seamless it makes managing the room. The gear is just unreal, and seeing it all come together is truly something special. 🌱 Nutrition Talk: As for feeding, we’re starting light but smart! I’ve begun with 0.15ml of Regulator and 0.25ml of Startbooster per liter for now. I always believe in starting easy and ramping up as the plants develop. These early stages are crucial—balance is everything. For the time being, I feel this is more than enough to keep the babies happy and healthy. 🌿💧 The Regulator is working wonders in maintaining plant structure and health, while the Startbooster is fueling the early root and vegetative growth, laying down a solid foundation for the weeks to come. It’s about getting it right from the start—too much too early can be a killer. Keeping it steady with precision, that’s the goal! Big Shout-Outs: To the amazing team at @TrolMaster, @Fast_Buds, @Sweet_Seeds, @AptusHolland, and all the incredible sponsors—I’m beyond grateful for the support! 💚 And to my GrowDiaries fam and followers, you guys make this journey what it is—thank you for the love, and I’m so honored to have you along for this ride. 🙏 We’re just getting started, and I can’t wait to show you what’s next. Stay tuned for more updates, epic builds, gear reviews, and plenty of insight. Don’t forget to follow me on GrowDiaries, YouTube, and IG for exclusive content, and let’s make this grow the best one yet! 🌿🔥 Growers Love to All 💚💚💚 P.S.- A deep dive into the Full Spectrum Quantum Sensor (MBS-PAR): The Full Spectrum Quantum Sensor (MBS-PAR) is an essential tool for any serious grower looking to optimize their light environment. This sensor measures photosynthetically active radiation (PAR), which refers to the spectrum of light that plants actually use for photosynthesis—typically between 400 and 700 nanometers and more depending . What makes the MBS-PAR sensor special is its full spectrum capability, meaning it accurately detects not just visible light but also far-red and UV light—which are crucial for maximizing plant growth, development, and flowering. With this tool, I can monitor the exact intensity of light my plants are receiving, making sure they’re getting the optimal levels for every stage of growth. By using this sensor in my grow room, I’ll be able to ensure that the light distribution is uniform across the canopy. Plus, it allows me to fine-tune the light output from my ThinkGrow LED setup, ensuring my plants are thriving under the best conditions. Whether it’s increasing light during the vegetative phase or fine-tuning it for flowering, the MBS-PAR sensor helps me keep everything on point. And the best part? I can monitor it all through the TrolMaster app, ensuring I can make adjustments whenever needed—even if I’m not in the grow room! This level of precision means healthier plants, better yields, and maximum efficiency. It’s a game-changer for taking the guesswork out of lighting and getting closer to growing perfection! 🌱💡 Growers Love to All 💚💚💚

The transition is officially happening—the plant has now fully entered the flowering phase!🌱 The stretch is kicking in, and it’s growing rapidly, really taking off this week. It looks incredibly healthy, with vibrant green leaves and strong development. Thanks to the LST, it has spread out beautifully, allowing for even light distribution and great bud site exposure. I’m really happy with how things are progressing and excited to see how the buds start forming in the coming weeks! This one is looking very promising.💪😎

Not actually sure if end of week 5, I will check at some point maybe :P Removed 3 Hermies, will check think 1 wasn't random/"?". Pinched tops of pretty much all plants. Chopped the males up a bit, probably just remove them soon anyways, but some super early pollination would be okay I rate. Maybe try grow like, a carrot, pumpkin, between or where I removed males. Guess today I feed a lil bit and water well otherwise. About 700ml per plant now.

420 Fastbuds BlueDream Auto Week 4 Holy 420 Fastbuds these girls have exploded thus past week. I'm start to see preflower sites all over which is very exciting because we all know what that means. Off to flower we go. I still have fed them 2 liters of well water daily and so far no signs of any nute deficiencys. All in all Happy Growing

Week 5 started well, plants looking good and time for some defoliation and lollipoping on low branches.. probably gonna flip to flower next week… let’s goooo

25cm vertical growth this week!!! She's nicely into flowering now!

как видите малышкам все очень нравиться!пока подгиб сделал только парочкам девок остальные плотные и мне их страшно гнуть.

🌿 Woche 3 Eine weiter recht heiße Woche.🌡️🔥 🌱 Wachstum Beide Damen haben einen schönen Wuchs und Grünton. Die anfängliche leichte Verbrennung hat sich perfekt rausgewachsen. Nun sollte die Livingsoil den Job super ausführen können. Noch sehen sie beide auch sehr identisch aus. 💧 Only Water Ich habe mich dazu entschieden, meiner Livingsoil ein wenig mehr unter die Arme zu greifen. Ein Grow-Kollege hat mir verschiedene Dinge empfohlen, die man machen kann. Ich habe mich dann für 2 Mittel entschieden, die mein Only Water Experiment nicht aushebeln: 🔹 Effektive Mikroorganismen von Multikraft 🔹 Mycorrizae von R&R Beide Mittel gelten nicht als Dünger für die Pflanze, sondern als Booster für den Boden. Dementsprechend kann man diesen Run immer noch als Only Water bezeichnen 💦✅ 📟 Blumat und Gießen Ich freunde mich immer mehr mit dem Blumat Digital an. Ich wüsste nicht, wie ich ohne ihn durch den Mulch den Gießzeitpunkt ermitteln sollte. Rumwühlen oder den Topf heben ist leider keine Option ❌. Deswegen bin ich wirklich froh, dass es ihn gibt 🙏. Ich gieße weiter nach Fahrplan: 🕒 Alle paar Tage bei 110 mbar 🚿 2 l Wasser Diesmal habe ich etwas EM Bodenbuster mitgemischt. Damit hab ich dann den Boden mit zusätzlichen Mycorrizae geimpft. ☀️ Wetter Wenn man bedenkt, dass es tage­lang locker über 33 °C heiß war 🌡️🔥 und ich dazu keinerlei RLF-Unterstützung hatte 💨❌ – sehen beide Damen top aus ✅. Manchmal denke ich: „Oh Gott, geht das gut?“ 😅 Aber ich lass es drauf ankommen. Und bis jetzt läuft alles nach Plan 🛸✨ 🎶 The Grow must go on! 🌱🔥

08/07/2020 Flowering week 2 for the bigger plant, all are cuttings of Red Sky I'm growing outside but this one is stinking some crazy smells not sure how to describe burnt rubber? And pine tar? Best I can say. Application of L A B this week to feed the microbial communities. Application to leaf surfaces to combat pw (prevent) bud rot.

The first half of pictures are before defoliating a little second half after Just chopped the one pictured above 1.27.18 Aromas are very strong and I would describe it as earthy and pine trees with chem like undertones that will raise the fuzz on ur peaches real quick. The buds packed on the weight in the past two weeks and bulked up heavily. The stalk is built like a brick shithouse even the side branches are holding up easily. On the smaller side due to some training but I expect a decent yield as the lowers on her are pretty developed. Rinsed with R/O H20 after chop mostly to retain moisture and drying at 58%-62% /68°f. Pumped the way this one turned out will update harvest when final numbers can be logged.

This strain was a little inconsistent for me, but the one that did end up doing well was well worth me trying this one out again. Overall the process was great and she performed very very well. 9/10 would grow again!

I'm expecting at least another week on the hubba bubba as it's getting nice and thick, and I haven't noticed any new pistols form in a few days. The ABxRKO is still trucking, and it makes me excited for the next drop that tree1four did. It smells heavy on the burger side, but not super meaty. It has a slightly sweet gassy meaty smell to it.

Belle couleur gorilla sherbet#1 sens très fort.

Gave her water last night and plan for shut her down sometime this week. Today is day 84 from when she sprouted.

She is expanding and drinking more and more water. The smell is getting stronger as well. At the end of next week she gets a lollipopping which is good because I cant reach the soil anymore without making some leaves wet.

I’ve switched to a custom fertilizer blend, flushed all the plants with the new solution until the runoff matched the input values. I’ve transplanted the original 3 seedlings into 1 gallon bags of promix cx (coco). Topped them and rooting the tops to make clones for this mom hunt. 1 of the originals (gorilla glue) has failed to thrive and is stunted at the 3rd node.. I’m ready to toss her. The 4 replacement seedlings are also ready to transplant but not quite ready to top for cloning, needs a little bit more stem growth before I prune back to the 3rd node. I’m very happy with these ladies so far. I could send the first 3 to flower right now but I’m going to wait for the other 4 to catch up first so I can run them all together.

Bit more growth from her this week 😁 Another 3.5cm 😀 Still no idea what I'm doing 😂