Likes
Comments
Share
Tale of two plant. Plant 1 has been the perfect plant so far during flower no really issue and is growing frosty. She look like she will be ready in a week or so Plant 2 is finally coming into shape and starting to get frosty, still lagging behind plant 1 in bud form and frostiness hopefully by harvest it will catch up about 2-4 weeks left
Likes
12
Share
day 27 flowering: The Blue gelato has some beautiful forming buds on her that remind me of ice cream oddly enough. She smells nicely if sweetness. sticky to touch and healthy as hell. I am a little dissapointed with her node spacing and hope her bud sizes can make up for it. she would have been better in scrog than quadlined i think but lessons learned. Do love her look though.
Likes
24
Share
Something is fckng with me heavy,I'm using tap/RO water 50/50. and still my cal mag issues are getting worse..I'm hoping that I will be able to finish this grow without big loss in potency or yield .
Likes
3
Share
Stressful grow honestly I have ptsd from my last grow being a complete Hermie den I literally had to check them every single day wondering if the swollen ovule’s were actually seeds lol well anyway I had to harvest at week 6! And this shit still came out ridiculously good smell✔️Taste✔️Bag appeal✔️✔️✔️ Great strain can’t wait to grow it again !
Likes
14
Share
@NewMan
Follow
Další týden pryč, prostříhat sem je nestihnul,tak snad tenhle týden to už vyjde. Zálivka každý třetí den 4.5l , jedu podle tabulky od Athény takže snižuju na půlku základní složky a Green Sensation stále 1ml/l. Ph 6.2 , ec 2.4 . Trošku jsem se nedomluvil s controllerem a díky změně času jsem holkám svítil 13/11, naštěstí jen 4 dny tak snad se to nijak nezbláznilo, vypadají pořád stejně tak asi dobrý.... Viděl bych to tak na dva týdny , doufám teda 😀.🖖
Likes
9
Share
@NanoLeaf
Follow
End of Week 11 (Fourth week of flower) The ladies are frosting up more and more by the day and there are trichomes everywhere! I Added about 8g per plant of GHF BioBloom and a cup of worm castings a small final feed to make sure the ladies have what they need to grow big dense buds. And increased the CO2 to 1400ppm and in 2 weeks time I will cut the CO2. The main top-sites are bulking up more and I am very happy with the inter-nodal spacing as well as the bud formation. Trying to keep the training to a bare minimum and ONLY removing fan leaves that are blocking bud sites. I have been keeping a cooler average temperature - and also keeping the relative humidity lower. Pest Report: None
Likes
30
Share
well what can i say this is what I saved from the fusarium outbreak that I had with the mother and all the clones. Managed to save 5 clones 2 are with a friend now. I have 3, one is a great specimen and the other 2 are lil clones that could. Round 2 here we go! Wish me luck!
Likes
14
Share
Dear Friends, 👨‍🌾 👩‍🌾 we are here to show you our journey with the BLUE SUNSET SHERBERT™️ by Barney’s Farm. Every plants of Barneys is a guarantee. Also this strain (that I had growed months ago LoL) is a miracle of the nature. Vigorous plant covered of preflowers! Easy to grow and perfect to train. Germination started on the 10/11/2022, the root sprout on the 12/11/2022. 27/11/2022 Transplanted into 15L Smartpot ✅ VEGETATIVE week #7 (LAST WEEK) 30/12 SWITCH 12/12H 📅this week goes from 26/12 to 01/01.📅 💡💡💡Viparspectra XS2000 is working at 50% power. 💉🔍Fertilization schedule:🔍💉 26/12 3ml/lt TOP VEG 30/12 TOP MASS 0.2ml/L + 2.2 ml/L TOP VEG 31/12 SENSI CAL MAG EXTRA 2ml/L foliar spray This new strain is hybrid produced from a cross between Sunset Sherbet x Purple Punch. It is a mostly indica strain, so, short flowering and big and dense buds! At the end of its flowering stage it will take a lots of colors, it is also beautiful to see!! I can’t wait to grow this strain! I’m excited like a child!! 🤓 🤓 We are glad to have the opportunity to try this strain from this experienced seed bank, we will do our best to grow this baby as well as possible. THANK YOU Barney’s Farm ❤️❤️❤️ ***WE ARE BACK!!! We are back after a little pause. We take a break because we were too busy to post high quality diaries. In the last diaries we tried to post as good as possible and we have to publish about 6 or 8 diaries (in addition to these that we will publish shortly). We opened also an educational Instagram page, we growed a lot in a short amount of time BUT, Instagram suspended our account and we lost all our posts, I was so sad and disappointed... a lot of work lost in a night....*** 🤓+DATA SHEET+🤓 BLUE SUNSET SHERBERT™️ Cannabis Seeds Strain Specifications Type: Feminised Photoperiodic Genetics: Sunset Sherbet x Purple Punch Effect: creative euphoric sativa high + full body Indica tranquilising calming experience Indoor Yield (g):up to 650-700 gr/m² Flowering Time (days): 59 - 63 Taste: Sweet Candy, Citrus Aroma: Sweet Candy, Citrus Zest, And Sweet Berry 💸💸💸💸💸 Buy BLUE SUNSET SHERBERT™️: https://www.barneysfarm.com/blue-sunset-sherbert-551 _______________________________________________________________________ 🔧💡OUR SET UP💡🔧 ✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕 ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light: Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. Until now, built quality is really awesome. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was creazy fast! This awesome brand also offers 3 years warranty. This lamp has no rivals. A special thanks to Emily of Viparspectra ❤️❤️❤️❤️ HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl and here you can buy other awesome stuff: https://www.viparspectra.com ✔️ 💲💲💲MARSHYDRO 🚀🚀🚀🌕🌕 📦120X120 GROW TENT: an awesome box, easy and fast to assembly. Made by strong materials, solid zips and it is totally lightproof. The position of holes is optimal and the two lateral windows will make easier the work inside the box. There is also a double end, so you are 100% sure that dirt or liquids will not spill out. You can find it here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-48x48x80-1680d-4-x-4-size-keeps-all-light-in-top-quality-1680d-canvas-is-tear-proof-and-double-stitched-light-blocking-fast-installation-for-sale 💡TS 600 FULL SPECTRUM 100W LED GROW LIGHT : with this light you will achieve excellent buds, you will not need anything more. This lamp replace a 150w HPS lamp, but, with this Led Light you will smoke bigger, harder and tastier buds because Led have a complete spectrum and a powerful light penetration, so your plants will work as much as possible to make you happy. Psssssss it it extremely cheap and it is only 100w, your bills will never be too high, YOU HAVE NO EXCUSES!! Here if you want this little beast: https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light Thank you Eleen of Marshydro❤️❤️❤️❤️ 💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd. Samsung LM301B 288 led/board 3000K 0dB noise +24led/board led Osram 660nm Efficiency 2.6 umol/J 220 lm/w Driver: Meanwell HLG-480H-36B 💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd. Samsung LM301H 504 led 3500K 0dB noise +24led/board led Osram 660nm Efficiency 2.7 umol/J 220 lm/w Driver: Meanwell HLG-240H-48B -ESTRACTION FAN: Blauberg 125 Turbo Pro Series Maximum air flow: 430-560 m³ / h 50W 32-44 dBA 💊💉💊FEEDINGS: We are growing in BioBizz Light Mix, it is perfect also for the first weeks. TOP CROP: -DEEPER UNDERGROUND: to stimulate roots system -TOP VEG: for a excellent growth in the vegetative phase -GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth -MICRO VITA: bacterias for equilibrate the soil and to make the plant healty -BIG ONE: to stimulate bud sites and to stimulate resin production -TOP BLOOM: to achieve excellent big and hard buds -TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight -TOP BUD: to enlarge buds and to gain weight PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency GROTEK: CAL MAG for cal mag deficiency HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil. GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess - Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot These two products improve A LOT the smoke of our babies -PURPINATOR to stimulate flavonoids and to have a better taste and smell. ____________________________________________________________________________________________ 🙏❤️ THANK YOU FOR BEING HERE ❤️🙏 Please leave a comment with your opinions, it is very important to us to have a comparison. If you like our job, tap the weed button and follow us. It will be really appreciated.🙏 We want to thank again everyone that help us in our project. You support us to support our dream. ❤️ SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD 🌿Thank you again🌿 ❤️Sweet hugs❤️ 👨‍🌾CHILLING_RACOONS👩‍🌾
Likes
2
Share
@SKIDR0W
Follow
edding Cheesecake: ein Leckerbissen für Geist und Körper. Ein Hybrid mit Wurzeln in Asien, Afrika, Europa und der USA. Unvergleichlicher Geschmack und Wirkung. Weiter oben im Wedding Cheesecake-Stammbaum sind die OG Kush, die Granddaddy Purple und die Purple Urkel von der Westküste der USA sowie die beliebtesten Sorten von Sensi Seeds – die Hindu Kush, die Big Bud und – beide Seiten der Familie beeinflussend – die Durban, die wirksame, reine Sativa aus Südafrika. Die feminisierten Wedding Cheesecake-Hanfsamen von White Label zeigen die gewünschten Eigenschaften von 5 Zuchtgenerationen. Ein komplexes, intensives Geschmacksprofil, eine unglaubliche Harzbildung sowie große, dichte Buds an einer robusten, kompakten, schnell blühenden Pflanze. Die feminisierten Wedding Cheesecake-Hanfsamen wachsen in einem Gewächshaus oder draußen in einem warmen, sonnigen Klima, bevorzugt mit einer relativ niedrigen Feuchtigkeit. In Innenräumen unter Lampen gedeiht diese Sorte jedoch am besten. Als schnell wachsende, pflegeleichte Sorte kann die Wedding Cheesecake sogar von Einsteigern kultiviert werden. Die wichtigsten Faktoren für diese Variante sind viel Licht und wenig Feuchtigkeit, um ihr Blütenpotenzial zu maximieren. Züchter sollten auch berücksichtigen, dass der Duft dieser Sorte ab Beginn der Blüte zunehmen kann, sodass ein gutes Belüftungssystem wichtig ist. Das komplette Zuschneiden der Zweige für ein enges Aneinandersetzen (auch Lollipopping genannt) wird nicht empfohlen. Das enge Aneinandersetzen und ein guter Ertrag sind möglich, indem kleine Klone mit der Sea of Green (SOG)-Methode zum Blühen gebracht werden. Durch Beschneiden/Topping der Hauptstämme größerer Pflanzen lässt sich die Anzahl der Austriebe und der Gesamtertrag steigern. Die Wedding Cheesecake verdoppelt bei der Blüte ihre Größe, wobei einige Pflanzen um 150 % wachsen. Ab und zu verdreifachen Exemplare ihre Größe in der Blütephase. Die White Label Wedding Cheesecake blüht schnell und kräftig und bildet massive, schwere Blütendolden in der oberen Hälfte des Hauptstammes und der Zweige. Kleinere, aber dennoch gleich dichte und harzige Blütentrauben befinden sich an den unteren Nodi, sodass an den kompakten Pflanzen erstaunlich wenig freier Platz vorhanden ist. Die Blütenkelche sind sehr harzige Kugeln, in der Regel mittelgroß, mit langen Blütenstempeln, die sich während der Reife manchmal pink statt orange verfärben. Die Kombination aus großen Buds mit mittelgroßen Blütenkelchen und üppigen Trichomen und langen Blütenstempeln verleihen den Hauptblütendolden der Wedding Cheesecake ein einzigartiges Aussehen, das zur selben Zeit flauschig und funkelnd ist. Nach der Ernte bleiben die Buds groß, fest und klebrig durch das Harz. Wenn sie aufgebrochen (oder nicht vorsichtig behandelt) werden, riecht man das tolle Terpenprofil aus dem Wedding Cheesecake-Stammbaum. Die stärkste Komponente stammt von der Cheese – einer grandios intensiven Skunk mit starken, süßen Beerennoten – in Kombination mit starken Zitrus-, Erd- und Holznoten von anderen berühmten Vorfahren. Es liegt auf der Hand, dass White Label Wedding Cheesecake eine extrem starke Wirkung hat und selbst von erfahrenen Konsumenten mit Bedacht eingesetzt werden sollte. Beim ersten Mal ist es ratsam, einen oder zwei moderate Testzüge zu machen und dann kurz zu warten, wie stark die Wirkung ist. Das High dieser Sorte erzeugt in jeder Dosis das typische warme, positive und anregende Gefühl. In mittleren bis hohen Dosen kann die Wirkung von starker, kontemplativer vollständiger Körperentspannung bis hin zu einer überschwänglichen, die Kommunikation fördernden und kreativen Stimmung und sogar psychedelischen Momenten reichen.
Likes
28
Share
Just started this journal, this is my 3rd grow in this box, experimenting with 3 toppings for 8 main colas
Likes
16
Share
@GRow_M8s
Follow
During week 7(bloom) like corona lock down wasn't enough we had major weather change. Temp dropped significantly and humidity levels increased to 70%(outdoors RH). As far this goes on it is necessary to use a strong dehumidifier inside tent for half an hour every 2 hours as once the lights are off the humidity climbs 65%+ without it. Feed remained the same. GG# 1 looks like most of its pistils are orange so in the end of the week I ll have a look with the microscope and might start flushing it.
Likes
14
Share
For LIQUIDS & Nutes ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.
Likes
2
Share
🌸 Week 9 – Opening the Door for the Flowers Blueberry Muffin has always had an interesting personality in this tent. She's not the tallest plant. She's not the largest plant. But she's been quietly building herself into a compact flowering machine. And that's exactly why I decided that a little selective defoliation was appropriate this week. We're not trying to strip her. We're not trying to make her naked. We're simply opening some space. A few leaves here. A little overlap there. Removing foliage that is no longer helping the structure we're trying to maintain. The goal is simple: More breathing room. Better light movement. Better airflow. Less unnecessary congestion. And when you have twelve different plants sharing the same room, sometimes opening one plant slightly also helps the environment around her. That's the beauty of working with the whole garden rather than looking at each plant in isolation. ✂️ Defoliation – It's About Purpose, Not Punishment I've talked about this before, but this week is a perfect opportunity to repeat it. Defoliation isn't about removing leaves because leaves are somehow "bad." They're not. Healthy leaves are incredibly valuable. They're photosynthetic organs. They're producing the energy the plant uses to grow and develop. So when I remove a leaf, I want to have a reason. Maybe it's heavily overlapping another leaf. Maybe it's sitting inside an increasingly congested section of the canopy. Maybe it's shading a developing flower while contributing relatively little to the structure. Maybe removing it creates a much better pathway for air. And sometimes... it's simply part of cleaning the plant. That's the approach we're taking with Blueberry Muffin. Selective. Intentional. Moderate. We're not trying to win a defoliation competition. We're trying to create a healthier, more manageable flowering plant. 💨 Airflow Becomes More Important as Flowers Develop This is where the timing becomes particularly interesting. As the plant gets deeper into flower, the canopy naturally becomes more complicated. Flowers get larger. Leaves overlap. Branches carry more biomass. And spaces that were wide open earlier in the grow can gradually become pockets of dense vegetation. That's not automatically a problem. But it's something worth managing. One of the reasons I wanted to open Blueberry Muffin a little more this week was simply to maintain air movement through the plant. Good airflow doesn't mean blasting the flowers with a hurricane. It means avoiding stagnant pockets of humid air trapped inside dense vegetation. And as we move further into flowering, that's increasingly important. Because nobody wants to discover a problem after flowers have already become dense. Prevention is much easier than trying to fix a problem later. 💧 Helping the Room Breathe There's another interesting side effect to opening the canopy. The plants are collectively producing and moving a lot of moisture through transpiration. When twelve plants are sharing a relatively enclosed environment, the canopy itself becomes a major part of the room's microclimate. Opening congested areas gives moving air more pathways through the plants. That can help reduce pockets of trapped humidity around the foliage. And when the canopy breathes better, the whole room benefits. Again, this isn't about expecting defoliation to magically control room humidity. The ventilation system is still doing the heavy lifting. But good canopy management can make the environment easier to manage. And that's exactly what we're looking for. 💡 Every Photon Has Somewhere to Go Blueberry Muffin is also at an interesting size. She's approximately 75 cm tall. That's not a huge plant. And because she's relatively compact, I want to make sure the available light isn't unnecessarily intercepted by layers of foliage sitting on top of other foliage. Yes, she has support from the under-canopy and inner-canopy lighting strategy. And that's fantastic. But additional lighting doesn't mean we should deliberately create unnecessary barriers between the light and the flowers. If we can open a section naturally and allow more photons to travel through the canopy, why not? We're not trying to expose every square centimetre of the plant. We're simply making the canopy a little more efficient. Sometimes the best lighting upgrade is simply... removing something that doesn't need to be in the way. 🌸 The Flowers Are Taking Over Now And this is where the photographs become particularly exciting. The flowers are becoming increasingly obvious throughout the plant. The white pistils are still doing a lot of the visual talking, but the individual flowering sites are gaining structure and substance. She's moving away from that early-flower appearance where everything is basically a collection of little pistil-covered points. Now we're beginning to see the plant building actual floral mass. The branches are carrying their flowers with confidence. The canopy has become more compact. And the whole plant feels like she's entering another chapter. This is the stage where I stop being interested in how much she's going to stretch... and become much more interested in how much she's going to stack. ? The Blueberry Muffin Personality One thing I really appreciate about this phenotype is how different she looks when compared with some of the other genetics in the tent. She's not trying to dominate. She isn't the tallest. She doesn't have the most dramatic structure. But she's developing her own little architecture. And that's what this entire 8×8 Adventure is about. Twelve genetics. One room. One general environment. And twelve completely different answers. Blueberry Muffin's answer seems to be: "Give me some time." And now she's starting to show us why. 💚 Nutrition – Staying the Course There's no reason to reinvent the feeding programme this week. We're keeping nutrition essentially unchanged. Current feeding remains: Terra Bloom — 2.2 ml/L Pure Zym — 1 ml/L Power Buds — 1 ml/L Sugar Royal — 1 ml/L pH Plus / Lemon Kick — as required The plant continues receiving the same flowering nutrition rather than reacting to every small visual change with another adjustment. That's important. We made a structural intervention this week. We don't need to simultaneously start changing everything else. One change at a time makes the plant much easier to read. 🌡️ The Room Has Changed And this week we do have a small but interesting environmental change. The daytime temperature remains around: 29°C But the night temperature is now approximately: 26°C Last week we were around 25.6°C, so the difference isn't dramatic, but the overall night temperature is slightly warmer. That means our day/night temperature differential is now smaller. We're also sitting around: RH: 60% Solution temperature: 25°C Root-zone/substrate temperature: 25°C CO₂: ~693 ppm Light schedule: 12/12 Watering: ~1.3 L per plant / 24h Container: 15 L And I actually like observing these little changes. The room doesn't have to remain frozen in time. What matters is understanding what changed and watching how the plants respond. At this stage, with flowers getting denser, keeping the canopy open and maintaining good air movement becomes even more valuable. 🌙 Day vs Night – The Difference Matters One of the things I enjoy about documenting these numbers is that they tell us more than a single temperature reading. We're running approximately: 29°C during the day → 26°C at night. That's only about a 3°C difference. Earlier in the run, the difference was a little larger. As the room changes, so does the relationship between temperature, humidity, transpiration and plant development. And this is why I don't like looking at temperature or humidity as isolated numbers. The plant doesn't experience "29°C." It experiences: temperature + humidity + light + airflow + root-zone conditions + CO₂ + time of day. Everything interacts. And right now, I'm happy with what the room is showing us. We're watching it. We're measuring it. And we're adjusting when necessary rather than reacting to every little fluctuation. 🔬 One More Reason I Like This Defoliation There's something else happening here that I think is easy to overlook. Cleaning the plant isn't only about what remains. It's also about what we can see afterward. Once some of the unnecessary foliage is removed, I can see the flowering structure much more clearly. I can see which branches are developing strongly. I can see where flowers are stacking. I can see where the canopy remains dense. And I can see what might need attention later. In other words... defoliation also improves observation. And for this project, observation is half the fun. 🔮 Looking Ahead From here, I want to keep things relatively simple. No unnecessary training. No dramatic interventions. No chasing numbers just because they're numbers. We'll continue watching the flowers develop, monitoring the canopy and paying attention to how she responds to the cleanup. The next stage should increasingly be about: 🌸 flower stacking 🌸 calyx development 🌸 increasing resin production 🌸 increasing flower density 🌸 maintaining airflow 🌸 keeping the environment stable The framework is already there. Now we're entering the part of the journey where patience becomes more important than intervention. We've done our job. Now... let Blueberry Muffin do hers. 💭 Final Thoughts – Making Space for What's Coming I think this week is a really good example of how I like to grow. We didn't defoliate because someone told us: "Week 9 means defoliation." We did it because the plant changed. She's becoming more compact. She's developing more flowers. The canopy is getting denser. She isn't a particularly tall plant, so making the available photons work efficiently matters. And with twelve plants sharing the same room, keeping air moving through the garden matters too. So we opened her up. Not dramatically. Not aggressively. Just enough. And now she looks cleaner, more open and easier to read. That's what I wanted. Not a naked plant. A better-organised plant. And honestly... she looks fantastic. Blueberry Muffin may not have started this journey as the plant that immediately grabbed everyone's attention. But she's slowly becoming one of those phenotypes where you look back at the earlier photographs and think: "Oh... now I see what she was doing." She's been building toward this. And now she's starting to show it. ?🌸🔥 🙏 Thank You A huge thank you once again to Zamnesia for giving us the opportunity to explore these genetics, Plagron for supporting the garden throughout the journey, Future of Grow for providing the light that powers this experiment, Lumiflora for bringing additional light into the inner and lower canopy, TrolMaster for helping maintain environmental stability, and of course everyone following this 8×8 Adventure on GrowDiaries. Every week gives us another little lesson. Sometimes it's about nutrition. Sometimes it's about environment. Sometimes it's about genetics. And sometimes... it's simply about knowing when to take a few leaves away and give the plant a little more room to breathe. Blueberry Muffin is entering another chapter now. The canopy is open. The flowers are developing. The room is stable. And there's still plenty of story left to write. Until next week... Growers Love and happy growing! 🌱💚?
Likes
Comments
Share
Likes
9
Share
KICKASS AUTO by KANNABIA Week#7 May 14th-21st Week #2 Flower This week she stretched about 2 inches she's right at 19 inches she also continues to grow side branches she really a nice looking bushy plant. Dark green color trichomes are starting to form on her buds and leaves and she's starting to fill in you can see the white hairs and start off little buds on her. She is doing great outside!! Stay Growing!! Kannabia.com Kickass Auto
Likes
3
Share
Best autoflower ever,you might not like the flavour because everyone has his own preferences but nothing beats this one in terms of potency