The Grow Awards 2026 🏆
Processing
Likes
13
Share
@GrowGuy97
Follow
Going great so far except the 2 Gorilla Zkittles are still a little far behind but they are starting to bounce back! Day 18 everything finally transplanted in 5 gallon pots except the hulk berry is in the 3 gallon, hopefully the 1 small gorilla zkittles hits a growth spurt soon🤞🏼
Likes
33
Share
Seems like all is in order. I had to go away for a week because of an emergency and luckily a friend looked after them, only thing he wasn’t sharp on was training and defoliating which is why it got so big and bushy last week. Still no nutrient deficiencies. I visited a website called cannastats a month ago and it actually breaks down ppm requirements for each element. Was a lot of work to get my spreadsheet to calculate properly, but really seems to be working. If anyone wants further details on this, feel free to DM me. I think the big stretch last week was caused by high temps, as a window was left shut when it shouldn’t have been, and also the light wasn’t in the middle because my friend moved the lights up and didn’t realise, so the colas at the back stretched more... that’s my theory anyway. Overall all is good, switch back to 3200k bulbs again today. Need a wide angle lenses to take a photo of this thing, she’s huge...
Likes
15
Share
Likes
27
Share
@Endriu
Follow
Here we are again Bros&Sis! During my first indoor grow with Bubblegum XL I've had took some cuts to keep them alive and have some good plants to play with and exploring a little more the vaste world of growing cannabis... Long story short, 5 of them has radicated (some with plain water technique, some in rockwool cube) and then I started to play with them and tested my chinese Meizhi R300W LED panel (real wattage is 136w) it was full of dust, so why not? 😎 Now, the plants. They are in good conditions, some are in the same pot by weeks now (soil and coco), and try to keep them alive, so maybe they shows sign of suffering. Except for the One: In the video you will see my REALLY HIGH SCIENTIFIC METHOD (😂) wich I use to choose the best clones that will goes directly under a Scrog net (i am a DIYer) to fill the entire area lighten by the panel, it's a bit ambitious, but it will be fun for sure! I choose that one because she is the only one that gives me really good vibes and shows me she is strong enough to pass through hst, crop, supercrop and so and so... even if my original intentions was to keep them as a bonsai mothers, I've decided that this project have priority! 10weeks old Bubblegum XL clone Pot 11lt NetPot Coco brick with mycos Canna Coco A+B Liquid silicon from Growth Technology- guys, this thing is magical, besides the great effects on the plants' roots and system, after a couple of apply the plants were much more flexible and resistant to mites (yes, they are still there, fu**inmotherfu**ers, but this time they will die. forever gone, bye!)- I will never stop to thank @Mr_Di for his precious tips😘Higly basic product, it will raise your solution's PH, so watch out! Let me know what you think about, mates! CIAO! 😀
Likes
19
Share
Legend Timestamp: 📅 Measures: 🛠️ Water: 🌊 Actions: 💼 Thoughts: 🧠 Events: 🚀 ________________________________ 📅 D57/F18 - 19/10/23 🛠️ EC 1.2 (stable) pH 6.0 (rising) --> EC 1.1 pH 6.3 🌊 Added water and nutes (B52, Big Bud and Bud Candy, only little bit of Bloom A and B) 💼 Little defolation and some adjustment on the little one. As I saw some light stress symptom I changed the light schedule to 12-12 but with red lights always on. 🧠 I can't wait to see the buds of Little Marlene reaching out Big Marlene 🚀 Little Marlene is now quickly blooming. Some light burn symptoms on little Marlene ________________________________ 📅 D58/F19 - 20/10/23 🛠️ EC 1.2 (stable) pH 5.7 (falling) 🌊 No water neighter nutes added 💼 Sprayed Spinosad 🧠 🚀 ________________________________ 📅 D59/F20 - 21/10/23 🛠️ EC 1.4 (rising) pH 5.4 (falling) --> EC 1.2 pH 5.5 🌊 Added 5L water, nutes Bloom A - B and calmag 💼 🧠 🚀Little Marlene leaves are wilting down ________________________________ 📅 D60/F21 - 22/10/23 🛠️ EC 1.3 (rising) pH 5.3 (falling) --> EC 1.2 pH 5.4 🌊 Added 2L water and nutes: Calmag, Bud Candy, Big Buds 💼 Made a big defolation and sprayed Spinosad. 🧠 I really hope Spinosad will solve the situation here. 🚀 _____________________________ 📅 D61/F22 - 23/10/23 🛠️ EC 1.3 (rising) pH 5.5 (stable) --> EC 1.2 pH 5.5 🌊 Added 4L water and nutes: Calmag, Rhino Skin, Bloom A, B 💼 Little defolation on the big one. 🧠 Never again two girls germinated in a such big time difference (3 weeks) 🚀 _____________________________ 📅 D62/F23 - 24/10/23 🛠️ @17.00 EC 1.3 (rising) pH 5.1 (falling) @23.30 EC 1.4 (rising) pH 5.2 (stable) --> EC 1.2 pH 5.2 🌊 Added 2 L of water, calmag, big bud and B52 💼 Little defolation on the big one. 🧠 🚀 _____________________________ 📅 D63/F24 - 25/10/23 🛠️ EC 1.3 (rising) pH 4.7 (falling) --> (by setup) --> EC 1.2 pH 5.5 . Check in the night EC: 1.13 (stable) pH 6.2 (rising) 🌊 RES Changed 💦💦💦 -> Added calmag, Bloom A-B, Bud Candy, Big Bud and B52 💼 🧠 Quite strange, but good, pH goes up in that way 🚀
Likes
Comments
Share
@DrGrow420
Follow
The plants have continued to grow very fast this week, easily doubling in size again. I moved them closer to the light to 80 cm from 90cm. Watering as needed and I am keeping the soil surface moist with light watering twice a day. I fed some Biobizz Biogrow and some organic teas this week. Low stress training was very effective and the plant responded well except one which stated quite short. I will see if it bounces back or it may be stunted.
Likes
23
Share
Buying nutrients can get so expensive so I have decided to use tried and true miracle grow. I had some left over from last summer and I am going to use it for this grow. I actually have never tried growing cannabis with miracle grow, so this is a first for me. Miss Gorilla grew a lot this week and produced a lot of new growth. It makes me think this plant may be a bushy plant. According to FB website: "This lady grows stout and bushy, reaching around 150cm while displaying a compact yet robust appearance with wide inter-nodal spacing. She will develop a thick main cola with fat side branches all around while not requiring much maintenance. She can produce up to 650 gr/m2 in around 10 weeks, putting her among the highest-yielding strains we’ve ever created."
Likes
9
Share
Non riesco più ad aggiornare il diario come sempre comunque è stata una settimana bellissima! Ogni varietà sta completando le fioritura in maniera abbondante. Infiorescenze dure e molto resinose si formano in ogni parte delle piante. Sembrano tutte XXL di dimensioni! Molto profumate ogni varietà ha il suo raffinato aroma, non manca molto alla fase finale della fioritura. Sono felice di ogni varietà, complimenti a chi le ha create! Un abbraccio a tutti
Likes
22
Share
Day 56f and week 8 and the girls are ripening up. Looking to harvest within the next 4 to 8 days. Just waiting for some more cloudy trichomes to show up. We've reduced our feeding to Canna Boost and Cannazyme only. For the last 4 days or so they will receive plain water. Really stoked how this girl has turned out so far and I can't wait to harvest her. Thank you everyone for likes and comments this far I so appreciate you guys. Growers love ✌️🏻-BLG Video- https://youtu.be/NVoXwpqe9AQ
Likes
44
Share
Started the week off by swapping the girls tent for my tiny 2x2x4 and they loved the environment. Such a small space, so easy to maintain. Increased the nutrients to about 1/4 the recommended dose from Advanced Nutrients, and also increased the water to a little over 1 cup by the end of the week, the girls responded great, and perked right up. I didn’t dial up the light this week as they were in a much smaller tent, but will be moving them to my big tent , while also transplanting n the very near future. I like to move up to 2 gallon pots for the 1 transplant, then move into their final 4 or 5 gallon pot around week 6 or 7, just in time for them to settle in before flipping to flower. Happy Gradening 🇨🇦👊❤️🌱
Likes
24
Share
Easy to grow plant, was growing faster then I expect, it was my first autoflower plant. I will grow more autoflower plants in future.
Likes
17
Share
@GutterHoe
Follow
So not nitrogen deficiency. It's light burn. Being that my lights at the highest it can be I am starting to let it have some rest at night. 20/4 now. Already the leaves are less brittle. Ph is balancing. Buds are fattening up nicely.
Likes
4
Share
@Ageddd
Follow
Last week of life, she is yellowing the leaves rippening faster than the week before, and Bad weather is here, during the middle of this week, so it rained hard dirung a couple of days, high RH and even more bugs are trying to eat the plant.... Aphids, flies, ants... They attract each other so what a jungle hahaha Im giving the plant a H202 bath to get rid of that bugs, they are really annoying hahaha damn fuckers, but they know whats a good therpene profile hahaha, really, if you could smell this plant would intstantly know that is a piece of cake for the bugs :) Hairs are like 90-100% orange Buds are covered by a nice layer of resin and THC ^^ Im happy, as my second auto, ended like an homogeneous bush, all buds at the same level, but now i think i should had removed more lower leaves to increase airflow... Take care boyzzz and girlzzz, and remember, smoke at least one joint a day if its possible hahaha :D
Likes
10
Share
The plant looks absolutely gorgeous, I had to reduce her height drastically due to her big size already, I want to avoid my plants from being seen from outside so let's see how this lady keeps developing guys
Likes
17
Share
Week 8 begins for mandarin dreams and divine storm. All four ladies are frosty, sticky and the mandarin smell is incredibly strong. I love how these girls look and are growing under the TSW2000, they look better than round 1, grown under my own custom Samsung strip's. Thank you Mars-Hydro for the light! Thanks for stopping by growfessors 👽🌳💚
Likes
8
Share
Time for chop is here 🤚🏼😎 Smells good, looks good. I have these three girls hanging upside down in a dark room with a heater on to keep between 60°F & 70°F & indirect airflow in the room to prevent mold & preserve terps. Aiming for 7-14 days drying time followed by a minimum of 21 days burping & curing. Will make a harvest post regarding dry weights smells & better flower pics in 4-5 weeks time. Until then check out my other grows & happy growing to all. 😊🌿
Likes
58
Share
March 11th. Tomorrow is the big Day for the Plants. They are getting another Training and then they are going into FLOWERINGMODE The Plants are looking superhappy, and I am totally fine with them. The autoflower Plant moves into a single Tent , and then remain 5 Plants Thats 2 San Fernado Valley and 3 Strawberry Cough So they hopefully have enough Space