Cosecha Reporte de Peso húmedo & Peso Seco de KS1 by Terpyz Mutant Genetics ⚖️ Total peso húmedo 404 ⚖️ Total peso seco TBD 💦Pérdida de H2O durante el proceso de secado TBD 🎨Colores Un color verde claro completamente perlada de tricomas! 👃Olores 💐Floración Principalmente kush: terroso (predominante), notas de pino, combustible, toque de cítricos y ligero fondo de skunk 🏜️ Secado TBD 🍗 Curado TBD 🍽️Sabor A definir cuando esté bien curada en el reporte de humo Variedad 💪Resistencia Resistente 5/10! - MUY afectada por el bloqueo de nutrientes que se ha presentado en la mayoria de plantas de este ciclo. No he conseguido erradicar la mosca blanca que ha estado presente en toda la floración! 🏋️‍♂️Entrenamiento: Se ha adaptado bien al topping (en 2 ocasiones), supercropping y LST! 🌱Vegetativo: Un vegetativo sin incidencias, aunque no creció mucho... 💐 Floración: Cogollos no muy densos por el bloqueo de nutrientes, pero cubiertos de muchos tricomas y con un aroma kush delicioso! Genética: Regular trabajo de breeding de Terpyz 👨‍⚖️Conclusión: Una cepa a probar en otras condiciones. No resistente. Pero perfil terpenico kush muy apreciado!

Smells are getting progressively stronger, smelling like tropical punch still. Showing signs of purple, possible with the dropping temperature at night with the AC. They are cover with trichomes and looking lovely!

Hello Diary, The Milky Way F1 is ready to harvest soon, although the Titan F1 ripened first and is already ready, the Milky Way F1 and Apollo F1 will have to wait another week in my estimation. The Milky Way F1, as seen in the photos, is truly a sight for the eyes. The flowers started to get more and more brown pistils, but looking under the microscope, the trichomes are not all milky yet. So I'll leave her for another day. Otherwise, the flowers are full of trichomes, from which a strong fragrance spreads. Here and there a yellowish leaf appears, which I immediately remove. Watering is a little more frequent due to the high temperatures, but I stopped adding any nutrients. Here's a quick recap of the week. 26/06/2023 - Day 58. Watering. Only two days later, the plants drank all the water, so I watered them with two liters for each individual plant. 29/06/2023 - Day 61. Watering. I repeated the procedure as I did three days earlier. 01/07/2023. - Day 63. Photographing plants. That's all for this week, see you soon.

This week I top all 8 Green Poison ( 4dwc and 4 coco ) clones. They look healthy and happy and few days later I already start to low stress training (LST) them.

A great second week here as the girls stabilize. They got watered two times this week. All good growth. 📈 This girl is doing the best out of them all. Looking real healthy still. Dimmed to 40% Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/

las manchas que presentaban en las hojas inferiores han quedado solo en las primeras pares de hojas, las superiores crecen sin ningún problema. tiene buen desarrollo y color.

Welcome to Veg Week 4 of Sensi Seeds Mandarine Jam I'm excited to share my grow journey with you from my Sensi Seeds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Photo Strain Mandarine Jam: Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Sensi Seeds • 💧Strain Info : 20-23% • ⏳ Flowering Time: 7-8weeks

Our Sticky Orange XXL Automatic from Sensi Seeds is now 9 weeks old, and she’s absolutely stunning! 🌱 The buds are dense, sticky, and smell incredibly delicious. She looks amazing – a true beauty! 😍 We’ve been using Xpert Nutrients fertilizers, and they really help in growing such gorgeous plants. Seeing these results is pure joy! Thanks to Sensi Seeds for the fantastic genetics and Xpert Nutrients for the support along the way.

Iniziò di un bel profumo per ambiente! Inizia la fioritura

Started on Wednesday and today, Saturday, transferred them to the pot. Quite happy rn :)

🌱: 💧 : 4l, reduced Supermix to 1,5ml/l on day 47 due to yellow leaf tips 💡 : Dli: 45 mol/m²/d 🤔:

Went away for a few days so missed some photos but they’re looking good

Always R.O Water Watering the plant 3 times for per week 1st Watering with nutriens. (750 ppm) (13.03.2023) 4 liter 2st Watering with nutriens. (750 ppm) (16.03.2023) 4 liter 3st Watering with only R.O water & CalMag. (300 ppm) 4 liter Yes it's full bloom now. 1000 ppfd

ALL TOPPED

The flower are very dense and I'm very happy to this. This is the last week that I feed my plants with nutrient, so the next week will start a flush period of two to three week.

Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.

Transplanted to five gallon pots, began low stress training.

Nice healthy plant nothing to complain about I’m excited about this one

☆♡ Gorilla Cookies: I've noticed a leaf fell off the bottom. I think I may've overdone the nutes. She's growing tremendously. I top dressed with the below, as the rest of my plants. I will only use PH'd water for the next several waterings, probably with Biosys or seaweed. ♡☆ 16.2.25: I decided to check out the lower canopies of all plants to see if I need to get rid of any foliage. I did get rid of a few small branches and leaves. However, whilst I was doing this, I saw more garden pegs from my LST remaining. There were about 6 or more in Pink Mist alone. Additionally, on Watermelon, there were some left in, too. I'm so annoyed to see that because the plants are really stretching, and I could've potentially disrupted this by leaving the pegs in for all this time without realising it. 🤞 that I haven't compromised things too much. We'll see. I watered today with 2ltrs of dechlorinated water PH'd to 6.3 containing the following nutrients; ♡ .8g Green Leaf Nutrients PK booster ♡ .5g Ecothrive Biosys I ordered quite a few things for the garden. I got Greenleaf Nutrients Sea K(elp) and Mega Crop Parts A+B. To go with their PK Booster I got last month. I'm excited to try it all together. Next run, maybe just using these. We'll see how it goes. 18.2.25: The plants are going crazy for water! Everything is getting used right up so fast! Today, I decided to add some more Black Strap Molasses to add some carbs and other micronutrients. I'll add the jar with the label in the photos section above. I watered a very small amount to each plant. What I put in: ♡ Black strap molasses 150g ♡ 2g Sea K(elp) Greenleaf nutrients. I dissolved everything in 4ltrs of dechlorinated water PH'd to 6.4. 19.2.25: I received the majority of the garden purchases that I made. I'm still waiting for the Ecothrive Life Cycle. I wanted to top dress, but it's been delayed unfortunately. I am using my Greenleaf nutrients products which I bought on Amazon. I got the Mega Crop 2 part system Part A and Part B. I have the Sea K(elp), and the bud explosion PK booster. I really wanted to get some of their sweet candy asking read many positive reviews. Unfortunately, for me, this is unavailable to buy currently. So that's a little disappointing. I needed to do a good watering so when my nutes were delivered today, I got excited 🤗 I watered 2ltrs of dechlorinated water per plant, PH'd to 6.4, containing the following nutrients: ♡ 1g Mega Crop Part A ♡ 1g Mega Crop Part B ♡ .5g Sea K(elp). The plants drank this up within a few hours. I'm going to try and hold off on watering in hopes that my Ecothrive Life Cycle will arrive so I can top dress and water it in then. 20.2.25: My Ecothrive Life Cycle arrived yesterday, and the plants are ready for their top dress and a good watering in. I have some Biobizz Light Mix, Canna Coco,and perlite. I'm going to use this as a base to mix my amendments in. I'm going to fill my 5 gallon bucket with about 4.5 gallons of my top dress mix. I will distribute this across 6, 4-5 gallon pots. Then I will water in well with Greenleaf nutrients Mega Crop Parts A+B and Sea K(elp). I've made a crude attempt to video mixing my top dress. Don't listen to the audio. lol, my YouTube didn't stop playing whilst I recorded this 😂 So anyway, I added the following amendments to the above base mix of 4.5 gallons; ♡ 3 TBSP Ecothrive Life Cycle ♡ 3 TBSP Vitalink Bat Guano ♡ 3 TBSP Ecothrive Charge ♡ 1 TBSP RHS Mycorrhizal Fungi granules ♡ 6 TBSP Ground Cinnamon.