Welcome to the first week of flowering in this run with BIG BLOCK by Cannabis Brothers. 7 days ago I took cuts and now I'm happy to show you the first shots of roots and also the amazing green canopy which I'm truly proud of. Each plant is marked as pheno 1, 2, 3, ...and here is a cut of pheno #9 showing the great success. Soon others will follow and then we will see after 3 weeks how many males or females we have and then we can have a first selection of potential keepers. For now I'd keep them all as they grow all equally good but time will tell how many ladies we actually have.

7/11 beginning of wk 15. Plant #2 is thirsty for nutes but for whatever reason, my tap water is testing at 6 on the ph scale and it used to be 8. Not sure what happened but im waiting to add nutes till I get on up. The nutes in the water showed ph of like 4. Idk if my ph things are wromg or whats going on. Other than that the planta are beauts. Plant # 1 is SO bushy. I defoliated her last week and you cant even tell this week 😅 7/12 just took pictures💚 7/16 watered with nutes

7/5/22 VD8 Coming along ok. Hoping for much better growth this week after starting a negative pressure environment I'm hoping this will increase co2. I'll monitor her for now and keep your on the same ppm/EC. I'll be taking away Artios Touch for this week and adding Atlas. Maybe during the week I'll increase PPM. 9/5/22 Up and coming plans. I'm going to top 1 of this in the coming week. Also I have a few ideas to help out in the pre flowering stage and have sorted out a temp controlled (AC intake fan). This will enable me to turn it on for 5mimd out of every 30 and pump cold 18c air into. I've also turned the light from 65% - 87.5%. Holding that lil bit of an extra kick for preflowering given with as much co2 time I can give them in their new homebox ambient 150+ 150x150x220 will allow me to go big and will widen in most areas what I can do with these girls. I'll be keeping a 50x50 space free in my tent for the 20l dehuimifier that will be running in the tent with my 800m3 6 inch EC/TEMP C9NTROLLED PRIMA KILMA intake fan will be turned on, by request OF the new automated dehuimdifying/temp controlled area which will allow me to grow in high co2 environment for at least 25 mins out of every 30. It'll all depend how quick my 3 co2 bags can bring up the ppm. And I'll only be doing this for preflower only then I'll go back to a negative pressure environment 15/5/22 Great week for growth. Had a look at the ends of the pots and roots where coming out of the end of the holes. Days ago. Hmmm, I'll only know if I waited too long if they stall. 16/5/22 So, as I suspected, both pots were root bound. Had to break up the soil instead of putting right into new pot minimising shock, sadly that's not gonna be the case, expecting considerable shock as I had to break up the soil, not fully but enough so roots will hopefully grow down. At best it'll set me back 2-4 days at worst 1-1.5 wks of a stall.

First topping 🌲☄️

I'm going to need a light sponsor on this next grow.

Continuing tie down the taller branches. They are showing sex, I think they'll be into flowering for next week.

Day 1 of week 4. Decided to do some LST on her. First time using dry amendments for Nutes and I must say I definitely recommend. Added them to the soil before I planted her and she’s shown no signs of deficiency.

20220403.progressing aok

Hello and we are at the end finnaly!! I harvest them on day 64!!! Harvest was amazing some flowers diffrent then others but cus of my noob box and all i am rly imprest and heppy abaut whole journey,this site helped me alooot!!!TYWM!! Buds are rly nice and they smell even better!! 😂 I was thinking of buying LED but.......i will grow indoor onley at winter and MH/HPS give alot of heat so is kinda rly nice....and i rly love how they grow this time so.....🤘 🤝For next grow i decided i will ..🤝 👉.more&sooner& etter LST then this time! 👉more def on ending. 👉Gonna buy CaMg fot sure! and mybe smth for roots/flowerig (didnt decide yet) 👉Better/stronger fans for better air flow 👉Alredy ordered magnify tool....60x 🔬zoom for 5€ from wish(with shiping)i had 32x zoom now but it wasn't enought. Still cant see tricomes clearly with 32x 👉Better reflector 👉Brought glasses so i dont destroy my eyes cus this briht light!😎 👉Ordered TDS metter In few weeks i report final results:)...... and alredy 5 neew flowers are growing 3x blackberry 2x zkittlers from 42 😎😎🤗 Eejoy life!

An exciting week again training this girl. Was spacing her out throughout the week using the low stress ties. As you can tell did a lot of defoliation and some minor lollipopping. Getting rid of the lower growth that'll be larf. Watering every day right now. Added the AC Infinity self watering device to this girl. Because of that and how much she stretched, I'm a little close to my lights. I've spaced out the clips as far as I can to raise it up but I'm just outta room. It shouldn't negatively effect the plants with this much space but still not ideal. If I run into any issues I'll turn the lights down to 80%. At 100% power Here are the lights details: Medic Grow Mini Sun-2 150W LED Model: MN150-022 Spectrum mode: V1 Efficacy: 2.8 umol/J Thanks for stopping by! You can find the light on Grow Diaries: https://growdiaries.com/grow-lights/medic-grow/mini-sun-2-150-watts You can find the light on Medic Grow's website: https://medicgrow.com/

- Water: tap water at 300 PPM, I add 0.6g of Hybrid powder and 0.4g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I water every 2 days because it is too wet, I water until the water runs out of the pot (to release the nutrients from previous waterings) -Daytime temperature: 21-26°C -Night temperature: 21-23°C -Humidity: 55-80% :/ too high -Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation 5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits https://www.mars-hydro.com/?acc=hou-stone

Two seeds germinated proper, the third seems to be a little slower. It's my first Grow for more then twelve Years. First Time with Autoflowers, first Time with feminized Seeds. Easy work, so far. 😃 T5 Light with 2 Tubes. Third seed germinated at Friday. Third seedling looks insane, i will seed one Taison next Week. The other look very good, I change the Light to 3500 K LED @50W / Plant First Week in Soil, Plants look good.

Bonjour a tous les padawans et les maîtres jedis Pour cette semaine 4 je surveille comme à mon habitude hygrométrie et arrosage. Je peaufine mon LST en stressant ma plante le moins possible. Je combine mon LST avec un pincage d'Apex cela me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Petit rappel sur le pincage d'Apex: Le pinçage des plantes de cannabis Proche de la taille d’apex sur le principe, cette technique possède cependant plusieurs avantages, le principal étant de conserver le gros bud central de la plante, d’une production et qualité maximale. Pinçage des plantes de cannabis Le pinçage d’apex (tête de la plante) consiste simplement à pincer délicatement la tige du dernier étage de la plante, entre le pouce et l’index, jusqu’à sentir la fibre s’écraser sous les doigts avec un petit bruit critch caractéristique. Si l’espace disponible sur la tige du dernier étage ne permet pas d’y placer confortablement ses doigts, il faudra plutôt pincer l’étage du dessous. Le pinçage ralentira fortement la croissance verticale de la plante, tout en stimulant le développement des branches secondaires, donnant ainsi à la plante une forme de buisson. La plante mettra quelques jours à réparer ce pinçage, formant un nœud à cet endroit, et poursuivra ensuite sa croissance de façon normale. Le pinçage peut alors être répété si nécessaire, sur l’étage suivant nouvellement formé, ainsi que sur les éventuelles branches secondaires qui pourraient dépasser l’apex. Le pinçage est donc une excellente technique pour avoir une belle canopée uniforme de type marée verte. En pinçant régulièrement l’apex des plus grandes plantes de votre espace, durant la croissance et en début de floraison (stretch), vous obtiendrez ainsi facilement des plantes de hauteur homogène en pleine floraison, ce qui facilitera la culture et augmentera la production finale, surtout si vous cultivez simultanément de multiples variétés de marijuana. Avec un peu d’habitude le pinçage pourra être réalisé aussi rapidement qu’efficacement. En cas de pinçage trop violent qui se traduirait par un apex arraché, cela produira simplement les mêmes résultats qu’une taille classique de l’apex, ce qui ne sera donc pas dramatique. Que la force soit avec vous💪

The end

- The stretch has slowed down a lot this week, big relief! - Not much else has changed. shes still drinking a lot and the buds are starting to take shape. - Thinking I might add another fan because night time humidity is reaching 70% sometimes and i really want to avoid bud rot.

Week 5 Everything looks good and frosty .. I’ll add the futur vert uv LED’s in a few days

Girls are growing and showing really nicely for 3 weeks of flower. Smells now starting to eminate from both. The Sugarcane smells like passion fruit punch and the orange Velvet is still to complex to call but amazing nonetheless. Defoliated more. Didn't have a choice since the canopy was still so dense.

Shape Day … take many Leafs off Think 2 Weekend maybe