Likes
Comments
Share
Likes
14
Share
ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. DID SOME MAJOR DEFOLIATION BECAUSE THEY ARE TOO BIG NOW. THEY ARE SWITCHED TO FLOWER AND THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
2
Share
@fabialien
Follow
Comenzamos esta aventura el dia 1 Agosto 2024. Hidratare por 24 hrs en vaso de agua con agua oxigenada, posteriormente pasaremos a servilleta y dejaremos se 24 a 48 hrs para pasar a maceta. Lunes 5 de Agosto hacemos trasplante a maceta definitiva.
Processing
Likes
14
Share
*BIG SORRY for the photo, hps light do that.) 🎄AND THESE IS CHRISTMAS, and an happy new years for you... plant is blooming very wel nice hollidays 😌🎄
Likes
12
Share
@Cannabot
Follow
Very satisfied,candy smelling buds.Thick colas,final week flush atm.Sweet seeds have some serious fire man thats for sure. Looking forward to harvesting this girl
Likes
13
Share
@Pennuts
Follow
The drying process lasted 14 days and I'm in the 2nd week of curing, I've already tried some buds and neither the smell nor the taste are great, the taste and smell of both phenotypes is lemon.
Likes
102
Share
@Roberts
Follow
Ztrawberriez auto is growing great. She is starting to stack and has been very hungry. She has a great layer of frost started. Everything is looking really good at the moment. Thank you Fast Buds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419
Likes
3
Share
Timelapse is every 4 hours. Watered approximately 1/5 to 1/2 a liter every day or two
Likes
4
Share
@Trinidad
Follow
16.04.25 day 44. Six days after defoliation was done. These ladies have recovered nicely. They have been stretching quite alot and flowers are developing. Canopy is fulling out tent. It is a pity one plant is lagging behind or suffering from some problem since seedling stage. There are some calmag deficiencies going on and I think leaves look a little pale and could be greener. I have only topped up reservoir with nutrient solution. Lights where raised an inch on 2 separate occasions. Plants are doing well but I think can do better. I dont monitor pH unless I see some problems. I'm still trying to figure out which name for which plant.
Likes
44
Share
The colours are popping! I’ve started to taper off the nutrients, I don’t typically “flush” the plants, but rather taper nutrients down until I have been able to give straight phd water for the last 3-4 feeds, making sure to water until I get about 5-10% runoff. I’ve tried both methods , the other being that I pour like 10 gallons of water through the plant, and I can’t tell the difference with my smoke, still clean and very tasty. I did a small defoliation at the end of the week, and added a support pole for the 1 lady in the far back, she was already starting to lean… just a couple of weeks to go !
Likes
5
Share
@ibbzy
Follow
Week 1 of flowering! Top dressed and now we wait and see how this stretch goes
Likes
8
Share
@RdSkM
Follow
Día 54. A pesar de todos los problemas e inestabilidad con esta planta, parece haberse quedado pequeña, no obstante sus flores fueron engordando y compactándose y se ven una delicia de colores y cristales blancos encima como pequeña montañas. Ya falta poco...
Processing
Likes
4
Share
@SakuraAsa
Follow
#1 and #2 outdoor seem to be both male. Bug me. The outdoors is full of enemies. 7/28 #3 Day62 12/12 Flowering / 4Week  short-day processing Day23  BioGrow1ml/l,Bloom3ml/l,Max1ml/l = 3.5l Next watering 3l #4 Day59 12/12 Flowering / 4Week  short-day processing Day23 BioGrow1ml/l,Bloom3ml/l,Max1ml/l = 3.5l Next watering 3l #Clone Day08 Light Schedule 18/6 7/31 #3 Day65 12/12 Flowering / 4Week  short-day processing Day26  #4 Day62 12/12 Flowering / 4Week  short-day processing Day26 #Clone Day11 Light Schedule 18/6
Likes
10
Share
Here I am again, I've been neglected this diary for 3 weeks so I made a fast update on the last 3 weeks, not so detailed unfortunately. Today is day 58, some leaves are yellowing and I don't understand what it could be. It seems a Phosphorus deficiency but there are also this strange rusty spots on some leaves on top of the plant. From what I know in case of deficiencies the first leaves to suffer should be the ones in the bottom part of the plant but I don't know. I upped the calmag a little because the rust spots could indicate calmag deficiency. Learning something new everyday with this hobby, I just hope I manage to stop the problem because in my previous grow I had a similar problem and didn't managed to stop it so in harvest time all the leaves were basically dead. Anothe detail I'm not happy about is the not so even canopy I created. I think I started LST a little too soon and therefore deformed a little too much the plant. Next time I'll try to top for the first time. Other than the problem I mentioned the buds are stacking up really really nice and they smell amazing. Real frosty buds it seems as you can see from the video. I hope I'm doing good :D
Likes
8
Share
wow look at dat!!! da plant leaves are getting lighter in da color!!! so i added a tablespoon of da homemade worm castings to da top of da soil!!! i used a spray bottle with water to work it into dat soil!!! castings are very very good and should give a little boost to da plant!!! da plant is getting top water 2 days and butt chugging 5 days per da week!!!
Likes
15
Share
6/24/24 the videos of trichomes is from both purple octane and rs 11 Also based on trichomes. I should've counted the last week of veg as a flower week. So she's closer than we 6/25 we have clear cloudy and purple. Leaning towards her going till the end of this week. 6/28 we have about 70-80% cloudy and 20-25% amber. she's ready to go. she will be chopped tomorrow morning. 6/29 unless stated otherwise. happy growing yall, this plant is a fucking badge of honor with how beautiful she 6/28 I lied and chopped her probably 30 mins after I posted that lmao.
Likes
5
Share
Всем привет друзья! Был в отпуске, ни до репортов было. Что могу сказать, разочервался я Fast buds. генетика попадается плохая, при чём беру разные сорта. Fast Buds Zkittlez был первый мой куст, когда только начинал гровить. Снял я тогда 120 сухого. Отложилось у меня положительное впечатление. И вот я снова решил поднять этот прекрасный сорт, в итоге получил мини куст. Всем добра и мира!
Likes
Comments
Share
@Robom069
Follow
Day 47/48 introducing the 12/12 on high power leds on the ladies lookin good so far the black domians nmow oin the right and the acid dough on the left i think both lamps work very similar
Likes
3
Share
@kdifiori_
Follow
It's harvest time! Despite a few hiccups along the way, this little girl has made remarkable progress. I had almost a month of extreme heat and she suffered a lot, especially in terms of flower density, but she recovered greatly in the last three weeks thanks to Overdrive. She didn't increase her yield, but her flower density increased significantly. I'm really happy with the final result!
Likes
16
Share
L'unico problema al momento è il ph che ogni giorno salta di 1 punto in più...da 5.9/6.0....a 7 anche 7.3... Nuovo problema: devo mettere un altra pietra porosa ad ossigenare il secchio principale,in modo che i residui non si fermino sul fondo vaso dello stesso... Ok tutto fatto...ho aggiunto una piccola pompa d'aria al vaso centrale.... altro ossigeno oltre che smuovere con le bolle il fondo...😉 Si è alzato un po' E..ora è a 0.8...mentre il ph si è stabilizzato sui 5.9-6.0