The Grow Awards 2026 🏆
Likes
Comments
Share
@Ganjamanz
Follow
Zkittlez #1 has been building some nice bud structure and is starting to smell really nice up close. Zkittlez #2 has seemed to stop stretching as much measuring at 3 ft 5 for now can't raise the light an more so hopefully that will be the end of the stretch and time for her to focus on bud structure. There are lots of bud sites building on her too many to count now which is a brilliant thing to say XD. The 2 pineapple chunk photoperiods are still developing nicely in their negative state and have been undergoing L.S.T to keep the canopy low and even. planning to do a 100 day veg on them (hopefully just enough time for both Zkittlez to mature and then harvest) and then FLIP! starting to give all plants a weekly spray of Canna-cure to help prevent any infestations.
Likes
10
Share
Ho eseguito il topping al 4/5 internodo a seconda dell altezza delle piante per pareggiarle
Likes
37
Share
Patiently waiting for these girls to begin their final descent! Gonna be some monster plants! Momster buds!!! Steady on my nutrient schedule this week and she made some big gains!!!
Likes
19
Share
@RFarm21
Follow
Semana 5 ( 05Nov-11Nov) Única rega da semana foi dia 11Nov. Os nutrientes foram misturados em 1,5L de água. Primeira dose de Bloom administrada.
Likes
54
Share
@BudXs
Follow
Solo cup challenge continues to press along. Not much change, plants are in veg, growing and healthy. Still a few weeks before the flowers start so I hope to get a bit of size going before it does. Having fun and really like looking at the other entries in this contest. Check out WildeWeed, Butterstotch and BeanswithPork, silky, larimar, fireman
Likes
9
Share
@AustinRon
Follow
2 Week AC3Q - Seedling Ambassador Cartwright by IRIE Genetics (Clementine X Arise) X Arise ((Tangie X Lemon Skunk) X Arise) X Arise  Start of Week 2 - 16 July 2022 AC3Q 15:S:2:1 to 22 July 2022 AC3Q 22:S:2:7 Environment: EC Targets: # rel. | abs (rel + source) ECseedling: [0.4, 0.5] [ 0.7, 1.0] ECearlyveg: [ 1.1, 1.4] [ 1.4, 1.7] EClateveg: [ 1.2. 1.5] [ 1.5, 1.8] ECearlybloom: [ 1.1. 1.4] [ 1.4, 1.7] EClatebloom: [ 1.3, 1.6] [ 1.6, 1.9] ECripen: [ 0.9, 1.2] [ 1.2, 1.5] ECflush: [ 0.0, 0.0] - Seedling (Week 1-2) - Temp: 78-82°F - VPD: 0.85 ± 0.05 - Photoperiod: 18/6 - Light Strength Start: 200-300 PPFD - EC: 1.0 FertigationFoliarMonday: Solar Wind: [ 2.5, ml, 500, ml] Silica Skin: [ 1.25, ml, 500, ml] FertigationFoliarWednesday: CalMag Fuel: [ 2.5, ml, 500, ml] Lush Green: [ 1.25, ml, 500, ml] FertigationFoliarFriday: Solar Wind: [ 2.5, ml, 500, ml] Peak Bloom: [ 0.675, ml, 500, ml] # Cease Begininning Flower Week 5 Rooted Leaf: Primary: # Mix and store for week, not Primer A: [ 2, ml ] Primer B: [ 2, ml ] Silica Skin: [ 1, ml ] # Mix with Base AT Feeding AtFeeding: Root Anchor: [ 1, ml ] # Sprout Lush Green: [ 1, ml ] # at Seedling (3 Nodes) Cal Mag Fuel: [ 1, ml] Sat 16 July 2022 AC3Q 15:S:2:1 - Remaining Plants , 1,3 - 7 (6 Total)    #7 (The Last One) was a potential Lost-Cause - HOWEVER - Her damaged leaflets were praying this morning. It provided sufficient material for Sex Testing.; Sex Testing - [x] Form Filled Out - [x] Clip #3 - [x] Clip #4 - [x] Clip #5 - [x] Clip #6 - [x] Clip #1 - [x] Clip #7 - [x] Package assembled & Mailed (1400) - [x] Install Oscillating Fans (2) - I should have done this LAST WEEK - Wondering why we were growing floppy plants - NEED Light Mechainical (AirFlow) Stimulation to build STRONG MERISTEMS. #6 After Clip  - Mixed up Sat Night/Sunday’s nutes - Full Panel ~ EC: 1.0 Sun 17 July 2022 AC3Q 16:S:2:2 0800: 30 ml full 0.8 EC - Wow - Every time I open the tent after extended close - I’m arrested by the Size change in the leaves. Right now - I see hybrid Vigor! - Installed supports for two leaners, should be ready to come off Wed/Thus ec 0.3 0.4 ml a 0.4 EC + 0.1 0.4 ml b 0.7 EC + -.3 0.2 si 0.7 EC + 0.0 0.2 cm 0.8 EC + 0.1 0.2 lg 0.8 EC + 0.0 2130: 20 Ml Full 0.8 EC - [x] Add Fans to Cabinet for plant strength - [x] Removed supports from 1 & 4 (Flopping Meristem) - Took 6 hours w/ fan for them to stand up! Mon 18 July 2022 AC3Q 17:S:2:3 0900 - 30 Ml Full 0.8 EC 2030: Mixed up Fresh Full @ 1.05 ± 0.05 EC 2100: 30 ml Full Fertigation Tue 19 July 2022 AC3Q 18:S:2:4  0800:30 ml Full EC: 0.8 
 - [ ] Mix up 1.05 ± 0.05 EC FULL 2100 Mixed up Full - EC: 1.05 ± 0.05 Raised ppfd Wed 20 July 2022 AC3Q 19:S:2:5 o730 ec 1.0-1.1, 30 ml per adjusted fans Foliar: - lush green - calmat Thu 21 July 2022 AC3Q 20:S:2:6 - Though fixing’ to harvest - she could use a little water (500 ml) w a littl Rooted Leaf Resin Bloom Fri 22 July 2022 AC3Q 21:S:2:7 Foliar: Solar Rain
Processing
Likes
32
Share
Day 43 : All of these girls are doing great now. They have been topped and quadlined and we have a few breaks to heal along the way but all in all doing good. #7 looks the most productive so far but they are very close to each other on vigour. They have been given MC to this point but once in their final pots , its water and teas for their full cycle only. I have finished the rebuild with better insulation and a lot more reflective surface for this run so let's see if I can squeeze another 41oz + from this run. So far a very impressive tester batch. I am hoping to flip them in about 2 weeks time so let's see how they do.
Likes
3
Share
@coolesrat
Follow
Starting to slow down their feed , they are drinking much slower then before and in a few days I’ll do a quick flush fully watering the pots till water comes out the bottom and another 500ml of magnesium sulphate so that I have something back into the substrate right away to prevent any lost they might suffer from an under feed in these crucial periods
Likes
24
Share
Hey everyone 🤗. This week they both continued to develop very well. Flowering day 35 Today the tent was cleaned, the humidifier refilled and the plants sprayed with Canna Cure :-). Flowering day 36 The plant was watered today with 1.2 L 🙂. They were also checked for their health and pests 👍. Everything looks great 🙏🏻. Flowering day 37 Again the tent was cleaned and fresh osmosis water was filled into canisters. Flowering day 38 Today 1.5 l per pot was poured so that some drainage comes out again. therefor two days are not poured 😋. Flowering day 39 The tent was cleaned, the humidifier was filled, the plant was checked for vitality and the entire electronics were checked for functionality. Flowering day 40 Today she was sprayed again with Canna Cure and checked. Flowering day 41 We got to the last day of this week and 1.2 L were poured again and the tent was cleaned 👍. I hope you have a lot of fun with the new update, and let it grow 🍀🙏🏻 You can buy this Strain at https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ You can buy this Nutrients at https://greenbuzzliquids.com/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 - 0.4 EC. Add Cal / Mag 2 ml per l water every 2 waterings . Ph with Organic Ph - Pulver to 5.8 .
Processing
Likes
38
Share
8/24: No deficiencies, no pestilence, no major issues with heat or humidity....just SO MUCH EASIER than trying to grow outdoors in summertime...😁 8/25: Was gonna feed today, but they aren't dry enough yet. Keeping it cooler in the closet has it's drawbacks... I'll do a foliar feeding with Microlife Maximum Blooms tonight and probably feed them tomorrow. 8/26: I fed them 8 gallons in total today, so that's a little under a half-gallon each. Hopefully they'll dry out a little quicker so I can get back to my normal routine. 8/27: Rotated the edge plants 8/28: Ogled them a bit... 8/29: I sprayed them at "dusk" with Microlife Maximum Blooms and did a little rearranging after removing the 3 autos from the closet. Now, each of the 15 plants has a little over 1 sq ft to itself...
Likes
12
Share
Growing full of buds . Going to be a stench plant i can already smell the oils . Getting too tall might have to backbud it. Great posture of a plant.
Likes
18
Share
@Luv2Grow
Follow
Day 72 - Starting week 11 and all I great, really frosty and getting nice and plump. Just counting down till I can chop and the way things are going, I’ll be doing it next weekend. Only seen a couple clear trichs in there and mostly milky! Hoping that by next weekend she’ll be full of amber and if not, I’ll let her go a bit longer. Day 73 - Gave her her last “feeding” today, mixed 5ML of MagiCal and 80ML of Sugardaddy to 2 gallons of water. She’ll probably only get one more watering of plain water this week and let her dry up until chop day. Day 74 - Nothing new today, just some updated pictures. She is definitely starting to fade pretty quickly, just need her to make it about 5 more days. Day 75 - Not seeing any clear trichs anywhere, all milky and starting to get more and more amber’s mixed in there. So looking like everything is on track for a weekend chop. She’ll get one more round of plain water tomorrow and let her dry up from there. Day 76 - Gave the girl her last drink of plain pH’d water tonight and gonna let her dry out from now until chop day and looking like I’ll cut her down Saturday sometime. Day 77 - End of week 11 and her last full week alive. Trichs are starting to amber up quite a bit and she’ll be getting the axe on Saturday. Gotta get a new jewelers loupe so I can get some pictures.
Likes
66
Share
Declared by the breeder for another 2 weeks. Let's see, plants began to drink much less. The leaves started to burn. In general, everything is fine. Meals according to the table removed heaven.
Likes
5
Share
Our Gush Mintz Automatic from Zamnesia has given us great satisfaction, this one is a nice big plant that will give us about 80-100 gr. ** We remind all users that we grow two plants per strain, one worked with specific techniques and the other left to grow freely and beautifully or worked with uncut techniques to preserve speed. In this case the first was worked with LST but after a mistake with the main lining that had led to the breakage of a brunch and this one with a single topping. Description // This plant was worked with a single topping but leaving under the topping two "levels" or rather two internodes of branches that gave us a nice bushy plant. The flowers have joined in beautiful long Tower Buds and not so tapered, the plant is quite full and the flowering is sufficiently dense. Trichomes and maturation // We did a thorough microscopic analysis 10x (and 10x x 1.6) and noticed a good percentage of milky/lumpy trichomes; The percentage of amber trichomes was not so much but good for me with still a bit transparent too. That's fine for us as we're not crazy about THC oxidation and hyper indica effects around here. Fertilizers and soil // We used the Plagron organic fertilizer range, all the recommended additives and Pro Mix soil, both unfertilized and organic. Calculate the dosage according to your needs on the website ------ https://plagron.com/ The nutrients are available in convenient packs on the Zamnesia website --------- https://www.zamnesia.io/en/11457-plagron-easy-pack-natural.html Try this strain, it is one of the best in recent years, with a very high THC level ---- https://www.zamnesia.io/en/11234-zamnesia-gush-mintz-automatic-semi.html Zamnesia Brief Description // Gush Mintz Auto is a relaxing hybrid strain derived from the original Gush Mintz and a high-performance ruderalis specimen. This cross has produced a plant with 70% indica and 30% sativa genetics. Her parents have given her some interesting characteristics, including mint and candy aromas and a high THC content of 20%. Smoking these buds provides creative vibes, a feeling of euphoria and a pleasant high that lasts from head to toe. In addition to its enticing flavors and powerful effects, Gush Mintz Auto produces large yields of compact buds in just 9-10 weeks from germination. Gush Mintz Auto is extremely easy to grow, with plants reaching an average height of 70cm indoors and 120cm outdoors, making her ideal for discreet grows or limited space, both indoors and outdoors. This strain is suitable for LST (Low Stress Training) and performs best when grown in the ScrOG technique (a technique that optimizes light exposure to maximize yields). Intense aromas and deeply relaxing effects As Gush Mintz Auto grows, her aroma intensifies, releasing sweet and minty notes. This refreshing flavor profile is perfect for smoking, offering an inviting combination of minty freshness and sweetness. The effects are deeply relaxing, enveloping the body in a pleasant sensation of well-being without being overly sedative. Gush Mintz Auto is perfect for those seeking creative inspiration, making writing, painting or music sessions smoother and more inspiring. The whole world of growing and much more is at Zamnesia, just visit the website to find "the best that nature has to offer" in various shapes and colours. -- // www.zamnesia.com
Likes
Comments
Share
Likes
3
Share
@CalGonJim
Follow
MONDAY 5/26 4am put up some readings from last night. I did 10, 10 Con Bloom PLUS 2mL of Bud Factor X. 1230pm WOW I hit the gears just right on BUD FACTOR X!!!... In FIVE YEARS...NEVER GOT IT RIGHT.... This combo worked the chloroplast tanks seemed flat, the X made a visible difference in how puffy the top sugar leaves are and the amount of resin is exactly like the advertisements....finally. There was something I thought was "sludge" in using X with Con. There IS a reaction between Con Bloom Part A, the color one and X. A reaction with amino acids, and protein binding from my observation, not a spoilage or rancid issue. 245pm What a day, I hope my Cuban robot girlfriend has Frank Sinatra playing, oh wait thats Bladerunner. 5/28 The tumor on my neck is getting horrible, I dont go to doctors and I dont call 911 so im going to get several bottles of whiskey and then I will open up the cysts. if I dont die from the infection I should be ok. 350pm Mars Hydro FC1500-EVO 150W 🚨👍 soon 5/29 420am. I HAVE BEEN UPLOADING AND SCREAMING ABOUT VIDEOS NOT WORKING....they ONLY work in NEW VIEW.....goddamnit!!!!!! I just figured it out........ PLANTS LOOK GREAT 5/30 Wating for the new light, should be here soon!! plants are getting top heavy. 4 cola design means I can do a diamond wire shape and they will be self supporting no external SCREENS or messes from that. 5/31 Saturday. MARS-HYDRO got the Samsung version of this light in TENT 2!!! I put on the BLUTOOTH ADAPTER it works great. I measure the amount of WATTS not percent of light but still very very nice works perfectly. MAKE THE APP PASSWORD FIRST OR IT WONT WORK RIGHT!!!! 🚨THE NEW LIGHT IN TENT 2: FC1500-EVO 150W SAMSUNG LED FOR MY RICKY PLANTS!!! The Grimm Seeds are strong as hell and can take the new lights, even at 93W might be too much, I might get to lower the overall wattage and save even more energy that way👍 6/1 SUNDAY THE NEW LIGHT IS MAKING MASSIVE DIFFENCE NICE with the new light!!!
Likes
11
Share
@tangie
Follow
Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?
Likes
16
Share
@Yog69
Follow
I guess, it's the waiting game. Just watering 1,5 liters ph'ed water daily and checking the trichomes. I'm really happy with the results so far. 😁😁😁
Likes
14
Share
Quand on contrôle un peut mieux le coco on arrive a tout que des résultats selon moi car pour ma première fois je trouve qu'il y as vraiment une grosse différence sur le développement en végétation vs terre . Agréablement surpris . Je suis présentement a 770 ppm avec un run off de 25-30% au alentour de 235 ppm et ca roule très bien . Ne vous gêner pas pour des conseille ses ma première pousse en coco. Je passe as 1100 ppm demain j'espère tout va bien se passé souhaitez moi bonne chance .
Likes
21
Share
This week was fun, trimming my final product from my last grow was a pleasure, not a pain 🤓. It was very satisfying. Received my seeds early in the week and had to wait a few days to get everything cleaned and ready to go, again, didn’t seem like chores… I think I’m hooked! Started germinating Nov 13/am, tap roots poking out 24 hours later! I’ll wait till they are a bit larger to plant. I’ll be planting directly into 5 gallon fabric pots, no transplanting. **update** Germination- seeds were planted after 48 hours. 2 sprouted, 36 hours later, so Day 1 would technically be Wednesday,November 16th…One went down because of the fiend pictured…He’s been hanging out with me more and more in the grow spot, I’ve also been giving him leaves while I trim, when the plants are vegging… I had the tent open, and he came in a little hard to sniff and pulled one sprout right out, and before I realized what was happening, he swallowed it up with a quick lick of his nose… 🤦 Started two more Wednesday PM, both seeds popped, they were planted Friday PM, no sprouts yet… 😌 sigh…. in the meantime, I received my 5 gallon fabric pots, so we’re now running 3 AK-47 from Crop King Seeds, withe the upgraded pots 😊👍