🍼 Greenhouse BIO Feeding Line which are ORGANIC For LIQUIDS ******GREEN BUZZ LIQUIDS***** also ORGANIC MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights

Lst lst lst :) :)

Nothing new to report. Been adjusting the trellis to just slow the stretch a little. Each plant got a half gallon on day 7.

Week #4 🌸🌺 💜

LSD Zamnesia Tripping 🙂 | Fresh Frozen, Ice Water & Temple Balls — Week 16 From Seed First of all… Yes 😄 We are once again dividing the harvest reports into multiple chapters, and once again we apologize for that. But honestly, there was simply no way to fit: * harvest, * drying, * trimming, * curing, * smoke review, * macro photography, * fresh frozen work, * washing, * extraction, * and hash making… …into a single GrowDiaries update without rushing through important parts of the process. And this part? This part deserved its own spotlight completely. Because this week was not about flower anymore. This week was about resin. Living resin. Fresh frozen material. Ice water extraction. Patience. Cold temperatures. Sticky hands. And slowly transforming trichomes into beautiful hash. For everyone joining only now, quick recap: These LSD girls were grown under 12/12 from seed from the very beginning. Minimal training, mostly natural structure, gentle leaf manipulation, and environmental balance instead of aggressive intervention. Part of the harvest was dried traditionally and already covered in the previous report. But another part… …never got dried at all. Straight during harvest, selected flowers were removed fresh from the plants and immediately vacuum sealed before going directly into the freezer. No drying. No curing. No waiting. Fresh frozen. And that changes everything. The goal here is preservation. When flowers are frozen immediately after harvest, a large portion of the volatile compounds: * terpenes, * flavonoids, * aromatic compounds, * and delicate resin characteristics… …can remain much closer to their living state compared to traditionally dried material. This is why fresh frozen extraction became so respected in modern hash making. It captures a version of the plant that only exists for a very short moment in time. Alive. Wet. Fresh. Fully expressed. And honestly? Opening those frozen bags weeks later felt like reopening harvest day itself 😄 The flowers still looked incredibly resinous even after sitting frozen for weeks waiting for wash day. Now let’s talk process. For the wash itself, we used the Bubbleator machine courtesy of Zamnesia , and honestly huge thanks to them for providing it. They knew I wanted to start exploring ice water extraction properly, and they were kind enough to support the journey. The setup itself is actually beautifully simple. First: ice. Lots of ice 😄 The machine was filled partially with ice first before adding the fresh frozen material inside the working bag. The flowers themselves were placed inside a closed 220-micron washing bag. This is important because the bag keeps the plant material contained while still allowing the trichome heads to separate during agitation. After placing the material inside: * more ice on top, * cold water added, * everything submerged, * and then… …we waited. Around 30 minutes or so. And this step is actually extremely important. A lot of people think washing starts when the machine turns on. But honestly? The wash starts before that. This resting phase allows the frozen material to: * slowly rehydrate, * absorb water again, * become fully saturated, * and most importantly… * become extremely cold throughout the entire plant material. Why does this matter? Because trichomes become brittle at very cold temperatures. The colder everything gets: * the easier the resin heads separate, * the cleaner the release becomes, * and the less physical force is required. That is also why ice exists under and above the material: * lower temperatures evenly, * protect the resin, * and maintain the cold environment throughout the wash. Once the water temperature approached near freezing… …the machine came alive 😄 And honestly? Watching the water slowly transform during the wash is always magical. At first: just ice, water, and flowers. Then slowly: foam, cloudiness, resin separation, and finally that beautiful milky golden water hash makers love seeing appear. Meanwhile on the side, we prepared the filter bags. We did not use every single micron separation individually because honestly sometimes over-separating becomes unnecessary depending on goals and material quality. Instead, we focused on collecting the grades we actually wanted to work with and enjoy. And then came one of the most satisfying parts of the entire process: Collection 😄 Slowly lifting the bags. Watching the resin gather. Carefully scraping. Separating grades. Observing texture and color differences. Beautiful creamy resin everywhere. Some lighter. Some slightly darker. Some sandy. Some greasy. Every layer carrying slightly different characteristics. After collection, the resin was carefully freeze-dried. And this part also requires patience. First freeze drying. Then breaking it apart. Then more drying. Then more waiting 😄 Depending on environment and conditions, full drying can take several days because trapped moisture inside hash is dangerous long term. Rushing this step can ruin months of work later. In this case, the process stretched closer to about a week before everything felt properly stable and ready to work. And honestly… This is where the magic really started. Once dry enough, we allowed the hash to rest briefly before beginning the hand-working process. No extreme heat. No giant pressure. No fancy machinery. Just: room temperature, body warmth, gentle pressure, folding, rolling, stretching, and patience. The room itself stayed around 15°C, which turned out to be perfect for working the resin slowly without overheating it. And this step matters far more than many people realize. When hand-working hash properly: * oils redistribute, * compounds begin merging, * terpenes spread through the material, * oxidation starts slowly, * texture evolves, * and curing begins transforming the resin itself over time. You are not simply “rolling hash.” You are starting a living curing process. And slowly… The texture changed completely. From sandy loose resin… to creamy material… to sticky dough… to smooth beautiful temple balls. Honestly, seeing that transformation happen in your hands never gets old 😄 Final result? Three temple balls total: * two smaller ones from smaller micron collections, * and one large main temple ball that became the true star of the session. Final weight: 46.5 grams.( big one ) And honestly? I was extremely happy with that result. Especially considering the quality, texture, color, and how beautifully this LSD washed overall. Once formed, the temple balls were wrapped carefully in parchment paper before being vacuum sealed for long-term curing. And now? They rest. Months. Maybe longer. Waiting. Because the goal here is not “fresh hash.” The goal is evolution. Traditional temple ball style curing allows: * oils to redistribute, * compounds to merge, * texture to transform, * aroma to deepen, * and the entire resin profile to mature over time. Almost like aging wine. Or curing cheese. Or fermenting traditional products slowly and intentionally. This is medicine with patience built into the process. And honestly… That part alone deserves respect. We also included: * detailed process photos, * collection stages, * macro photography, * texture closeups, * curing progression, * and multiple stacked macro images showing the resin in insane detail. Some of these stacks reached: * 62 frames, * 87 frames, * 114 frames, * and even 152-frame focus stacks. Because honestly, hash under macro magnification becomes another universe completely. The textures stop looking real. Tiny resin mountains. Oil rivers. Micro-crystals. Glossy surfaces. Soft creamy structures. It almost starts looking geological instead of botanical 😄 Mr. Baggy of course supervised the entire operation like the professional resin inspector he clearly believes he is. And next week… The final chapter arrives. Smoke review. Curing review. Flower review. Hash review. Terpene evolution. Effects. Textures. Lessons learned. Mistakes made. And final thoughts after this entire LSD journey from seed to cured medicine. And finally… Thank you. To Zamnesia for the genetics and the Bubbleator. To Plagron. To F.O.G. To all the LEDs, gear, and equipment involved. To GrowDiaries. To the community. To the OG followers. To the new curious visitors. To the silent supporters. To the skeptics. To the lovers and even the haters 😄 To everyone spending time sharing this strange beautiful plant journey with us. Wishing everyone: cold water, sticky fingers, healthy plants, beautiful resin, and enough patience to let good hash become great hash 🌱

salut a tous bonne semaine ça gonfle la résine commence a apparaitre légère décoloration des feuilles inférieures sinon au top vivement la semaine prochaine bon jardinage a tous peace

Welcome to Flower Week 5 of Fast Buds Purple Haze Auto I'm excited to share my grow journey with you from my FastBuds Project . It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this Project , I’ve chosen the Feminized Auto Purple Haze: Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Fast buds • 💧 Humidity Range: 60 • ⏳ Flowering Time: 8 Weeks • Strain Info: 23%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 12 • Nutrient Brand: Hy-Pro • ⚡ Lights : 600W x 2 A huge thank you to Fast Buds for allowing me to try my Best with this amazing collection from Automatic and Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

So, absolutely against the recommendation I received from a friend of mine who's been growing for 20+ years, I pruned/defoliated my plants up a bit this week. I decided to for a few reasons. - the plants were really dense with foliage, many leaves overlapping and pushing other leaves - most of the bud sites were shaded under several layers of leaves - the leaves pilling up would have been restricting airflow quite a lot, I want to prevent budrot or mold by increasing aeration - I wanted to control where the plants were growing, and focus their energy into the buds - with this being an outdoor grow late in the season with less sun I felt it was more important to expose the developing buds to the sun With all that said, I think my plants have responded extremely well to the pruning in the last few days. I've never pruned or defoliated before so this is going to serve as a test for me. I like doing new things and seeing what happens. No matter what, these plants look really good right now and I'm sure I'll get a decent harvest, I'm trying to push it from decent to fantastic. My PPM is a bit high, though none of the plants look like they're being hindered by it. I did a partial water change on 2 of the 3 (the one in the 3 gallon bucket and the one that looks more like and indica). The 3 gallon bucket plant was at a PPM of 5000ish so I made sure to get it more in line with the other two, and with the partial water change I got it to around 2000. The other plants are sitting at right about 3000. I will continue to monitor the plants and check PPM, if it doesn't go down next week I think I'll do another partial water change. I want to keep pumping in nutrient while preventing any burn or lockout. Trichomes are no observable on the two plants in larger buckets. The smaller bucket plant was the last to sprout, so it's about a week or two behind the others. This week has been pretty poor weather where I'm at. Lots of rain and clouds. I've kept the plants under cover but still in direct sunlight. This coming week is supposed to be clear sky again so I'll move them to capture the most light once the rain stops. I know defoliation is debatable, especially with outdoor grows, but I like to push boundaries. Here's a list of the things I've done with this grow: - kratky method hydroponics (other than a partial water change I have added no water since starting in buckets, no airstone, no pump) - Winter grow (shortest light period of the year here) - Topping (and it looks like one is more like FIMing, also one grew as if it were topped without my input) - Dense nutrient load (I've added more nutrient in this grow than any grow I have previously done. Mostly because I never achieved super large buds and I'm really aiming for that this time) - Water change (like an aquarium, I've never done a water change other than flush before, this week called for it with the high PPM which I think was residual from nutrient loading in veg so I wanted to make sure there's room for the flower nutes) - Defoliation/pruning (nothing too crazy or drastic, started this week and don't plan to trim again unless I see a need to)

Everything still looking good. I did a small defoliation yesterday. For the most part, the stretch is over. May get one or two more inches though. Lights aren't moving any higher. Thanks for stopping by...

This beautiful girl easily coped with stress, now she has become a giant, she feels very well 🌋😍💚

Constant LST on these girls. They are so leggy I'm worried that if I let up the canopies will get out of control. I feel like i'm doing a good job with it thought. The occasional super cropping is needed and I leaf tuck and even take leaves almost everyday. Doesn't seem to slow em' down. Lights are at about 75% now. Weather has calmed down so temperature in the tent is consistently below 80F. Happened just in time for mid-flower. Right before the weather changed I build an exhaust to vent everything outside so controlling the atmosphere is a lot easier and I think it shows. Switched to bloom nutes towards the end of this week. Miracle Berry Remix IMMEDIATELY perked up and stopping being droopy all the time. CDLC woke up and I'm really happy with her now. Phosphorous is really important once pre-flower begins. Getting impatient....gonna pop some Double Grapes for the Solo Cup competition. Lowering my PH to 5.5 - 5.7 to accomodate for any salt build up in the coir since they drink water so quickly. Their response was very good. CDLC loved the drop in PH the most I believe. I cut my veg nutrients (nitrogen) to half because they aren't in full flower but i'm giving them full doses of the Maxibloom and additives. I've learned that most chlorosis I am experiencing is a nutrient deficiency. PH and increasing PPM steadily is a MUST to be successful I believe. Potassium is what generally causes the "nutrient burn". You'll catch nitrogen toxicity before any chlorosis and phosphorous is really difficult to give your plant too much of. Especially in flower. I'm gettin' the hang of this.... If anyone could answer me this....Why would you use a feeding schedule when your plant is going to require different nutrients than any other plants? There are too many variable to use a feeding schedule correct? Really not much to see this week besides the plants bulking up. They are gorgeous...except for the CDLC...she's got some work to do. Day 49 - Watered with some whacked out PH water today...didn't catch it until it was too late. Mango Smile was dropping by the end of watering...hopefully I didn't stall anyone out. Check out the pheno difference between the two Miracle Berry Remixs.

10/24/2018 Beginning of week #5, flowering stretching is slowing down,and filling out, not much to report on all seems well so that scares me a little. Week 6 and maybe week 7 I will be adding Overdrive by advanced nutrients. Have any of you guy's and/ or gals used it ? I would appreciate any feedback .. Also thinking about upping the bloom by .5ml, any experience with raising nute levels plant looks very healthy, just wondering if anyone thinks it is worth trying. I'am using PH Perfect, grow, micro, bloom, plus overdrive in week #6, and #7, as I'am not sure if it is a 10-12 week plant. Not sure if you seen some 11 FINGER leaves and longer thinner SATIVA like attributes. Much like pollen Father donor grapefruit male (SATIVA)😎 Ps. more pics in morning as my tablet is acting up! 10/29/2018 All is well resin is plentiful even larger leaves are sticky and citrusy( captain cake). Glad I cloned her! Got four starting to root,and ready to transplant transplant. Trading one for swami select green zebra 10/30/2018 Light defoiliating and little supercropping. To even out canopy.

What can I say about this one she’s my pride and joy she’s got so much buds growing on her it’s amazing I just hope that in the next couple of weeks they will swell and fatten up besides that I couldn’t be happier she’s got a beautiful fruity smell and an amazing frosting I’m planning to feed her for another two weeks And then will start flushing Description Candida (CD-1) has the highest CBD and lowest THC content of any strain currently available on the seed market. It was named after the founder of Medical Marijuana Genetics’ late mother and means ‘bright light’ in Latin. Our Laboratory results show CBD levels of between 20.6% and 10.9% CBD with THC levels rising with higher CBD levels - but never passing 1% THC. The balance between CBD and THC remains more consistent than any similar strain. With these ratios of CBD to THC, the anti-psychotic capabilities of the higher levels of CBD outweigh the relatively small amounts of THC, and effectively remove the "high", psychological effect, ensuring a non-psychoactive cannabis plant. Candida can be grown both indoors and outdoors. It is recommended for all environments and grow-media and has a unique lemon flavour and aroma that compliments its medicinal properties. CD-1 will flourish in any climate. It has impressed many with its highly vigorous early growth Candida will noticeably produce two different phenotypes; a sativa and an indica. Initial research has suggested that the sativa phenotype will produce lower, whispier yields often associated with sativa strains. We have noticed to date that the sativa pheno produces higher CBD counts. In comparison, the indica pheno will produce bigger, denser yields with lower CBD levels but still with significant CBD content. It is recommended to give good care to the sativa phenos as these can be harder to manage and will have larger distances between the internodes making the plants more vulnerable. Generally, the sativa pheno is better suited to making extractions than to smoking and vaping, whilst the indica pheno is suitable for all. Characteristics BREEDER/BRAND Medical Marijuana Genetics GENETICS ACDC x Harlequin VARIETY Indica / Sativa FLOWERING TYPE Photoperiod SEX Feminised THC CONTENT 0.3%-0.9% CBD CONTENT 10.6%-20.6% YIELD 400 gr/m2 GROWS Greenhouse, Indoors, Outdoors FLOWERING TIME 9 weeks MEDICAL CONDITIONS ADD/ADHD, Anorexia, Anxiety, Autism, Depression, Epilepsy, Inflammation, Seizures, Stress MEDICINAL PROPERTIES Depression, ADHD, Anorexia, Epilepsy, Autism, Anxiety, Inflammation, Seizures, Stress. AWARDS 2nd place CBD category. Spannabis Champions Cup Madrid 2017

Results are starting to come in now, going to be Cake all the way to the end. Time to grab your popcorn and stay tuned in 🤡🎪 Short Phenos is Pure Michigan lean, obvious now with the purple starting to form from bud sites. Tall girl is Sugar Cane Pheno what a stake, huh!? GHL out 🚀

Just waiting and watching trichomes & pistils. As of today all the trichomes are milky, but not all of the pistils have changed colour. A lot of them are still white. So on she goes!!! 😎

Hello my beautiful friends 😇 😇 😇 After 3 weeks on grow period flowering stage is here 💪 💪 💪 Day- 22 The girls started to be very bushy, as they start showing first sign of flowering I go into the action and I proceed a small defoliation 🙌 Nothing big just to maintain a healthy growth and airflow 😇 😇 😇 Day- 23 Around two or three days ago I make a new tank of 10l... Nearly entire solution goes 😇 I have got heavy drinkers here 😂 😂 😂 All the best, You Lovely Girls Growers 💪💪💪