ONLY 3 PLANTS LEFT IN THE 8X8. LESS THAN A WEEK EVERYTHING WILL BE DONE 🤞 ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

This is mainly an ongoing diary to check on the feminization rate of my autos.To see if they will, herm out, i'm not necessarily doing stress tests.I am still growing them within a given range. I have yet to see any pollen sacks or nanners. However, I am impressed that we're looking at Six out of ten have gone into blooms so far. Of the oddles that I bred.

This is the final week for plant #2 ,#3, #4 ,#5, #11 , #12. The other six will be kept in veg until the first six harvest. I also collected clones of the plants listed above just in case I come across a really good pheno to keep as a mother plant. Today I switched the first 6 into a 12/12 cycle.

👋🌱✨ day 82 Harvest happened right in the middle of a heatwave. During the last few days, I was barely able to keep the temps around 26–27°C. To keep the temperatures down, I turned off the bottom light for the last few days and dimmed the main led. + day of darkness before harvest.

November 16th, 47 days post flip. Plants continue to fatten and have put on some really noticeable weight in the last week. By the looks of things I’m expecting around 10 more days of fattening and than a week or two of ripening before harvest. I will do my final defoliation around mid week this week. Shooting for day 49 or 50. At this point will not be providing anything but water. I still am not seeing any fade so I think she has plenty of what she needs. I did get a chance to add those two smaller fans I wanted to add. This has dropped my temperatures from 82 to 77. This drop should hopefully help preserve terpenes and help prevent mold. The airflow will also help prevent mold. Plant 1(Cherry Chunks): The frost on this one is insane. I also get why they call it cherry chunks, it’s terpenes profile is starting to come through and it is tart in nature; its structure is also very chunk like. Much lighter green compared to the two purple marmalades Plant 2(Purple Marmalade): The resin on this thing has been insane since the very start of flowering. Smells of tropical fruits and guava really looking forward to this one Plant 3(Purple Marmalade): Smells on this one are finally starting to take off, it slept for awhile as far as the smell department went. It is starting to take on a sweet gassy funk kind of smell. Possibly lavender and gas? I’ll have a better idea come next week. The density on these nugs are also insane, look like they are going to explode any second. Purple Marmalade Clones: Growing very well, needs a good defoliation here soon and maybe some craft blend. As always guys thank you so much for following along and God bless!

Day 43 : Watering with co2 tab / 5L. Also added food again because i think they need it. Increased ppm to 850. Maybe the next one will be pure water. Ventilation works all the time when lights are on. Temp and humi are stable and this is good for the girls. 5 cm in 3 days. Patience is the key always. Also removed some burned leaves from all ladies. Edit (Day 47) : Watering with co2 tab every 5L. I watered with juices again at 850ppm because i felt that they need it. Only DsD drank pure water because of burns. Also 4cm in 4 days. She will be low yielder with good stuff. It smells sickkkk.

Flowering week 1

She’s getting bigger!

.

Día 97 fue el último día antes del corte

She gave me 107 seeds for future use and some herbs up to 30 grams!

Day 14 - She's thriving it seems so far. She's bursting with tri-leafed nodes. I've changed the environment a bit. I have not been successful cooling the room enough to bring down the VPD from 1.3kPa or so. Instead I'm approaching it from a humidity perspective. I have the threshold up to 70%RH. I'm peaking the humidity to lower the VPD to .9kPa since I can't really effectively cool the tent to the low 70's. There is a slight aroma from the seedling. The infamous skunky smell is only observable when very close to the plant. I have not been using the filter on the exhaust fan though.

----- WEEK 9 ----- ----- Day 57 ----- Easy day of watching. Just 1 pic today so far. not much reason to go downstairs to take a pic yet. Glookies is turning Purple on sugar and fan leaves now. Harvest is very soon. I'd wager within 7 days now just going to depend on the High I get off tester nugs. ***Update*** I destroyed the trellis and took em out for some pics and vids. Trichs = Tropicana is ready Tuesday, Wedding Cake probably Friday or within that weekend. ----- Day 58 ----- Last couple days. Fed about 30ml of Cal/Mag and 30ml of Molasses. Wanted to just keep the photosynthesis process and the plant in general alive for reveg. Was getting a bit too yellow for my liking. Harvest soon. ----- Day 59 ----- Harvested Tropicanna Glookies today Deleted this week by accident trying to make it a harvest week, so remade it. Will add harvest week once plants are dry and tester has been smoked to give proper info Put some more photos in. Basically the tent is 4 feet wide and the ruler is 12 inches long from bottom of duct tape Really loving the colors of this plant. ------ Day 60 ----- Fed only the Wedding Cake - 5-10ml of Calimagic and 20ml of molasses (NO Liter level marked or PPM or PH, i could cut today its done but im just maturing the trichs) Tropicanna Glookies is a friggin BEAUTIFUL strain. Moved the Wedding Cake in the tent so largest nugs are furthest away from light and dropped light from 1000w to 600w to save electricity Chop on Wedding Cake happens at mostly amber trichs. Prob 5-6 days max for that i'll know when I check trichs tonight and update with photo. ----- Day 61 ----- Wedding Cake is about 5% amber... so prob 6 days or so. Slow day today. ----- Day 62 ----- Feeding is today, going to just use some CaliMagic and Molasses again. Trichs aren't golden yet, so not chop time ... 8-9 weeks is what it is supposed to take, but it's got at least another 5-8+ days until 30-40% amber trichs for Indica couch-lock effect to shine in the Wedding Cake. Tropicanna could still be going right now, but I did not want more than 5-10% amber gold trichs to prevent a couch-lock effect. This has worked very well. On day 64 I will post a smoke report and full harvest/trim details as Saturday/Sunday is trimming. Will have dry weight results of Tropicanna (per plant, and as a whole). Tropicanna being sent to lab for full analysis will post results when they arrive (Usually 2-3 weeks after sending sample via mail) ------ Day 63 ------ Nothing to talk about today, slow day. almost done. *Update* 1 pic, i think it explains everything.

Original Sensible Seeds White Crystal Meth Auto finished out nicely compared to where it had started out, there was a time within the first 3 weeks that I was going to trash the plant, the plant looked fried, I am sure it was just a weird start, but Original Sensible Seeds genetics are always strong, and this girl bounced back and yielded 197 grams of pre-dried weight of truly great looking buds, I would love for an opportunity to gro this one outgain.

The plant is stretching very fast. It's very healthy. It's a nice plant, very vigorously and lot of ramifications.

Added yellow sticky fly traps to all cubes as a preventative measure to avoid infestation of fungus gnats. So far none have been spotted. Defoliated and did a little more LST to all the plants to open up the center and give more light to lower shoots. Blue Dream 3 and Chemdawg 3 started showing some discoloration on the leaves (yellowing around the veins) and also the leaf tips curling down. Did some research and came up with this... Possible diagnosis: - Yellowing around leaf veins could be a sign of Magnesium or Iron deficiency - Leaf tip curling down could be a sign of Nitrogen Toxicity. - Both could be caused by improper ph balance in water Possible solutions: - Applied Botanicare CalMag+ as a foliar feed and added some to the reservoir. CalMag+ contains Calcium, Magnesium and Iron. - Diluted nutrients in reservoir to lower amount of nitrogen being fed to plants. Was feeding them at 1300ppm, lowered it to 1050ppm - Tested runoff and saw it was coming out at 5.4pH so I increased the pH in the reservoir to 6.0. Now the runnoff is testing at 5.7pH, meaning that my rootzone is in the optimal range of 5.5-5.8 Well wait and see how the plants react to these slight tweaks. Hopefully we start to see a nice healthy even green again.

The gorilla cookies is looking good but the purple lemonade is doing much better but i think the gorilla cookies is putting out alot of roots through the seven gallon fabric pot thats why it isnt as big as the purple lemonade

Etapa de prefloracion.

Day 77 The plant is deep into late flowering now, and the buds are clearly maturing. Trichome coverage has noticeably increased-most are cloudy, with only a few remaining clear. Pistils are starting to darken and curl inward, although there are still some fresh light-colored hairs emerging. The aroma has intensified, becoming richer and more pungent when the lights warm up. The leaves show a slight fade, mostly around the edges, which is normal at this stage as the plant reallocates energy toward bud development. No signs of stress or significant nutrient issues, Humidity and airflow remain stable to prevent mold since the buds are now dense and sticky Section Fully Updatet.