Likes
Comments
Share
@LiamF
Follow
Day 29 : removed the LST (later note - BIG MISTAKE) Day 29: First signs of flowering😍 800ml water with nutes on day 31 1L water with nutes on day 33 1L water with nutes on day 35
Likes
27
Share
Final flush done. Turned lights off 14/2/21. Leaving in darkness for 3 days before chop. Room temp 20° humidity 30%. Once hang drying humidity will be 50% and when curing ill be using 62% 2 way humidity packs. Hopefully I'll get some nice dense nuggets. Chopped them week 11 day 6. I'll update more pictures of individual strains when dry and curing.
Likes
2
Share
@RoidBlaze
Follow
Very excited. Quick germination. Free seed from Attitude which I've had my eyes on for a while so pretty excited to have this lady pop! Hoping for a banger of plant! Running Greenhouse Hybred line
Likes
5
Share
Flower week 2 ! She is doing amazing, tallest plant in the tent, she is much happier now with lower water moisture levels. She is growing super fast, every day she puts in weight ! Very happy with this one !
Likes
62
Share
............................................... ............................................. ............................................ ............................................
Likes
10
Share
Everything seems to be going pretty good.
Likes
1
Share
Hermosa plantas que no me han dado ningun problema. Cogollos grandes y super conpactos que huelen a quimico. Ya les daremos una nota definitiva cuando esten curadas.
Likes
2
Share
Next week is the last week before 2 weeks flash:) I'm a bit sad that they haven't become any real fat buds, but the next run will be with extremely good seeds, you can look forward to it. Nevertheless, the cherry runtz looks great, it is covered with trichomes and has a very sweet and sour smell Cannaapeace
Likes
5
Share
@Ninjabuds
Follow
Gran turismo from lit farms is a super winner. I’m sad I didn’t take a clone. The plant has a craziest smell also it has super huge tricomb heads and its tricomb density is next level. When you touch the buds they are so so so very sticky and the smell is so strong probably the strongest smelling plant I have grown. Also the bud structure is super pretty and uniform. It’s almost unreal. I wish I had more seeds to this plant. I guess it will just be a memory after it’s all smoked and gone.
Likes
6
Share
LLego el momento, cambio del fotoperiodo a 12/12 Hice riego con ya con fertilizante de flora como para ya bajar las cantidades de nitrogeno, y tambien con una EC un poco baja ya que habian signos de sobre fertilización Regue con una EC de 1.2 y 6 de PH
Likes
2
Share
The plant finalized stretching and bulking up. I've could also give her more space in the tent after reorganizing and next week she's going back to high wattage lamp
Likes
42
Share
Strain. Gelato41🍦 Breeder. Seedstockers🐿️ light. Mars hydro ts1000💡 soil . biobizz lightmix 👊 nutrients. biobizz grow 🌱 biobizz heaven 😍 Growing extremely well shall top #1 today and wait for the other to catch up . Happy growing 💚 📢📢 UPGRADED to the MarsHydro ts1000 EFFICIENCY WHITE LED GROW LIGHT: Newest SMD LED technology provides highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS/MH; MARS HYDRO TS 1000 growing light makes you get 30% higher yield compared OLD blurple led lights, Max 2.0g yield per wattage (power draw). LOWER RUNNING COSTS & HIGHER YIELDS: Actual Power 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 80x80CM, Max Coverage 100x100CM. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO reflective grow tent, or by crossing over using multiple TS1000. SUNLIGHT FULL SPECTRUM LED GROW LIGHT FOR WHOLE GROWING STAGES: 760nm IR/660nm Red/5000k blue/3000k warm white light. Infinite close to natural sun light, TS1000 suits for all plants whole stages indoor growing, rapid plant response from seed to flower, achieving maximum quantity and high-quality yields . CUSTOMIZED GROWING NEEDS WITH UPGRADED DIMMING DAISY CHAIN: Newest TS series growing lights support multi-lights connection up to 15 lights for your various growing needs and stages; TS1000 light auto sensing power supply works on both 120VAC, 230VAC and 277VAC, suits for Large Rooms and Commercial Setups. HIGH REFLECTIVE & NOISE FREE DESIGN: High reflective hood, noise fanless free TS series grow light. Quickly aluminum heat dispersing material increases light intensity up to 20%, reducing light lost to aisles and walls, allowing your plants receiving more energy without burning your plants in maximum headroom Shes up and running 💚🙏😊 Thanks @Marshydro for the sponsorship opportunity
Likes
17
Share
what a journey, such a beautiful result i should retire now how can it become any better. thx everyone watching by. have a nice day and an even better grow
Likes
57
Share
Hey everyone 😃 The time has come , On flowering day 64 the harvest was carried out 😍. After spending two days in the darkroom at 62% humidity, they were now harvested cleanly by hand 😃. After harvesting, they were laid out on the net as usual, where they can now slowly dry again for about 7-10 days at 62%. Then they come with 62% in jars for 2-4 weeks, and then the 58% boveda packs are put in 👍. Of course, I will come to the phenotypes themselves in detail in the last update. Until then, I wish you all the best, stay healthy 🙏🏻 and let it grow 🍀👋 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
25
Share
Hadn’t really planned on starting veg in the middle of the night but I’m an insomniac and I think they were ready. Transplanted into clay pellets pre washed and pre soaked in ph 5.8 RO water. Going to flood for 15 minutes every 6 hours. Wanted to start off very light and technaflora recipe for success didn’t exactly say what to do for early veg, so decided to go 1/4 strength to start and work up from there. Starting at roughly 50% on the dimmer and will gradually ramp up. Added a humidifier since I’m in a very dry climate. First grow, hoping I’m not overthinking this. Wish me luck. Update 3/27 Realized I didn’t have enough water in my reservoir and plants were looking pretty stretchy. Added 5 gallons of ph5.8 1/4 strength solution. Shooting for 400 ppm for week 1 of actual veg. Plants are officially a week old from dropping in soil plugs. I think I’m going to count this as start of veg since I kinda screwed up with water level. Thankfully clay was soaked when I transplanted. Update 3/30 Plants stretched a little bit yesterday and started to topple over. Spent the better part of yesterday trying to keep them upright. In retrospect I originally transplanted these way too tall. Carefully dug away pellets and replanted deeper so leaves are just above ground level. All plant root systems look healthy. Bottom left plant is looking sadder than the rest with some droopy leaves. It was the stretchiest of the bunch. Update 3/31 PH had crept up to 6.4. Added 5 gal of ro water to top off. Brought ppm up to 400 and ph down to 5.8. Plants bounced back very nicely from deeper transplant. Running humidifier on lowest setting while lights are on to keep it around 70% rh Update 4/1 Upped nutes from 400 to 650ppm. Trying to ramp up to full strength by second week of veg. PH had crept up to like 6.5, brought it down to 5.8. Humidifier is only on during the day. At night it causes humidity to skyrocket and droplets to form on leaves even on lowest setting. May need to get it on a timer or just get a better humidifier. This 2.2L sucks
Likes
16
Share
Did some defoliation as well as more LST. They are all doing well Ultimate 1 & 2 are further in flower than Ultimate #3 but that is because she was stunted by the use of the Phlizon light at the beginning.
Likes
2
Share
@Indy4
Follow
8.11. chopped exactly at day60, some plants are furtehr along than others, some have amber some milky but with one drying tent you have to make a choice. Smallest plant from the beginning looks surprisingly good with leaf to flower ratio, the rest will be more trim jail. Updates on the numbers soon. 20.11. Curing in jars after 12 days in 16c and 60rlf after dry trim. Burping once a day
Likes
17
Share
@Kirsten
Follow
26.1.25: I have had a mistake 😕 I spilt some Fish Mix as I was experimenting with a syphon from some aquarium tubing I have. Unfortunately, I forgot to take the syphon out! Ugh 😣 However, it is fish emulsion and very thick consistency. Therefore, I was able to scrape it up with 2 of my business cards up off the counter. So added this extra into the next 2 ltr solution I mixed. All plants were watered with at least 1ltr of dechlorinated water PH'd to 6.3. Containing the following nutrients;- ♡ 3ml Seachem Seaweed ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 3ml Biobizz Bloom ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Xpert Nutrients Cal-Mag ♡ .25g Ecothrive Biosys. ♡ 2.5g of Bicarbonate of Soda as PH UP. Unfortunately I have broken my PH pen too. Accidentally submerged it under water, then the readings went crazy. I'm leaving it to dry by standing it up but I'm most likely going to need a new one, which is extremely annoying 😑 I'm going start implementing the Scrog net probably some point next week if I let the plants that are in flower to just grow up now, as I do believe that I stunted Watermelon 🍉 by using too strenuous LST. Hopefully the plants still are able to grow upwards at this stage during flower for all the Purple Punch P1, P2 and P3. We will soon see! 28.1.25: My PH pen has packed up 😣 I've got to wait to get another. It's super annoying 😑 so I'm just judging by memory how to regulate it. Unfortunately, that's my only choice! I'm also out of the dechlorinator 😕 things are not going very well this week so far 😅 I guess we will have to make do, until I can get replenished. 29.1.25: I removed all the plants, hoovered, and disinfected the tent. There were several accidents when watering, causing some debris and splashes. I decided to just go ahead and get a few other things done. It's crazy how quickly things can become neglected! 😣 So I defoliated moderately on all plants except Gorilla Cookies seedling. I have absolutely dropped the ball on my lighting situation! My light was much further away than I thought! I turned it up to 100% and dropped it down to just under 2 feet away. After I reset the tent, I set up my scrog net. I removed 80% of all LST pegs. I am planning on letting the scrog net take over the training from here. I really want to minimise the risk of mould, so I decided to start using my dehumidifier. It has raised up to 73% RH this week, so it's necessary. Hopefully, I will be able to get my dechlorinator and PH pen soon! That's kind of essential to me. It's been a little bit of a stressful day in the garden, to be honest 😅 30.1.25: So I am expecting the arrival of my new PH pen today, as well as my new bottle of Ecothrive neutralise. It is supposed to measure the TDS and EC in addition to the standard TEMP and PH, which I had previously. Obviously, time will tell if it's any good or not. I realise, much too late now, that my lighting is very insufficient for this many plants. I need double the watts at least, and coverage is very poor. I remembered I had an old LED floor lamp, which was in a corner being unused. I decided to take the stand off, and Zip tied the pole onto the tent pole at the back left corner. I have no idea what the wattage is, and it's quite pathetic 😅 but I mean, I might as well use it, being as I definitely cannot afford more lights! 😣 Next grow, I will probably only grow 2 plants, max 4, and just use larger 7-10 Gallon pots. Being as I ran out of dechlorinator, I only watered some plants properly because I only had enough to make 6 litres. When my pen arrives, I will get everything properly watered. 31.1.25: The leaves of several plants are showing signs of iron deficiency. This is likely due to my PH pen packing up earlier. I now have a new pen. Due to this, I decided to use my Seachem Prime, which I use for my aquariums. As I wanted to get them watered properly, and my Ecothrive Neutralise hasn't arrived yet. I watered each plant with 1ltr of dechlorinated water PH'd to 6.0. I added .25g Ecothrive Biosys to the water. May give them a breather on the nutes and just use the Cal-Mag and Biosys. Being as I've just topped dressed with rich fertilisers, I'm sure that will be OK for the next several waterings. Bubble Kush
Likes
12
Share
@ELPIRATA
Follow
🙏 Ha comenzado la semana Nº7, Se han acentuado mas los olores en el cuarto de cultivo, se logran apreciar diversos botones, Espero logren crecer de manera desmedida y robusta. El día 20/06/2020 se han regado 3 plantas en macetas de 11 litros: X2 Semillas Auto Lemon Kix= 1L [1MlBLOMBASTIC+1.5mlKnactive+5ml/L ATAGrowth-C+5mL ATAFlower-C+1mLAutoTop] PH 6.2(?) / EC= 1.84Tº=23 X1 Semilla Auto Tutankhamon= 1L [1MlBLOMBASTIC+1.5mlKnactive+5ml/L ATAGrowth-C+5mL ATAFlower-C+1mLAutoTop] PH 6.2(?) / EC= 1.84Tº=23 *El día de hoy se han regado 1 planta en macetas de 7 litros: X1 Semillas Auto Lemon Kix#3 = 800 ml [1MlBLOMBASTIC+1.5mlKnactive+5ml/L ATAGrowth-C+5mL ATAFlower-C+1mLAutoTop] PH 6.2(?) / EC= 1.84Tº=23 *Se comienza a usar Bloombastic en semana 6, dia 42 (0.5 ml/Lt) 😈 Buenos humos!