Día 48 (10/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/I +TopBooster 0,2 ml/l - pH 6.2 Día 49 (11/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,5 ml/I +TopBooster 0,2 ml/l - pH 6.2 Subo el CalMag a 0,5 ml/L porque BPPA no se recupera, y el resto muestran inicio de deficiencia Día 50 (12/06) Está lloviendo mucho por aquí. Menos mal que tengo el techo de policarbonato en mi invernadero casero. Hoy no necesitan riego Día 51 (13/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,5 ml/I + TopBooster 0,2 ml/l - pH 6.2 Día 52 (14/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + CaMg-Boost 0,5 ml/I + TopBooster 0,2 ml/l - pH 6.2 Día 53 (15/06) Riego con 1 Litro H2O + Regulator 0,15 ml/l + P-Boost 0,5 ml/l + K-Boost 0,5 ml/l + CaMg-Boost 0,5 ml/I + TopBooster 0,2 ml/l - pH 6.2 Día 54 (16/06) Riego con Té de Floración - 750 ml / planta 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Week 6 starts 12/31/21 but I happened to notice a weird leaf the night before. The Northern Light X Blueberry auto is very dark green and has sharp downturned tips. Which starts down the rabbit hole of google search to see the cause. I decide that is is Nitrogen toxicity caused by underwatering. At this time I was not really paying attention to when I feed them just whenever the pots were light. I watered them I later realize that while it may have started with underwatering it was so many other problems at once. I forgot to check the ppm or ph going in one day last week so I checked them going out. The run off was 2700ppm and I forgot to look up what that meant. I also doubled the strength of the nutes. 1/2 Saturday I flushed all the plants with 5 gallons of fresh water each that read 6.43 ph & 51ppm. I have Fox farm sledge hammer but for some reason I decided to use just water. The run off was consistently 6.2ph and I rinsed until the ppm was about 450 on NB. 250 ppm on Gorilla Glue and Pineapple express. I then decided that since it was nitrogen toxicity from underwatering that I should not starve the plant so I gave her week 1 of flower nutrients from the Foxfarm feeding schedule at 1/2 strength. I did not use Calmag since it's nitrogen was 2 and I didn't add the boomerang because that has nitrogen as a 1 and I thought since this plant has nitrogen toxicity I should skip the extra 3 nitrogen for now. I set each plant up on blocks so air could totally circulate to dry out the pots. Turned the fans on and waited. 1/6 There has been almost no growth since the flush. NB started off at a little over 9 inches and if I stretch her she is 10 at most.

It's almost time to harvest.

The flowers are swelling up, the leaves are getting lighter, I noticed the Glookies are starting to show some purple. This made me a bit excited, because during my previous grows most of the plants were plain green, only rarely with a bit of purple on some flowers. Later in the week, the Sour Stawberry also started to become purple on the top and the big fan leaves started fading into yellow very quickly. I guess it's autumn? The GMO is getting more and more leaf issues, since the others aren't bad off, I assume I just can't get it fed properly. Maybe I will boost the nutes up next week. The smell is still incredible, I am so far happy with the choices in strains that I made.

2024-05-25 The Fatso GO Plants had a good stretch again, and i can see tiny Flowerbuds thats good, so they are officially into Floweringmode. Weather is cold and rainy again, so they will stay indoors for longer. Fatso GMO F1 Auto, a feminized hybrid strain, emerges from the crossbreeding of two autoflowering varieties: Fatso Auto and Cotton Candy Auto. This California-derived cultivar leans slightly towards sativa, offering growers a straightforward cultivation experience coupled with impressive yields, robust THC levels, and a delightful palate featuring sweet, candy, and fuel undertones. Thriving both indoors and outdoors, Fatso GMO F1 Auto exhibits above-average resistance to mold, while still benefiting from adequate ventilation, particularly in environments with higher humidity levels. Its exceptional resistance to pests and pathogens ensures hassle-free cultivation. While indoor plants maintain a compact stature of around 100cm or less, outdoor specimens can stretch a bit taller, reaching heights of up to 130cm when grown in open ground. Completing its entire lifecycle within a maximum of 75 days from germination to harvest, Fatso GMO F1 Auto delivers yields considered average yet impressive for an autoflowering strain. The combination of high resin production and elevated terpene levels renders it an excellent choice for cannabis extract production. Its terpene profile presents a sweet and funky aroma with savory hints of Skunk complemented by pine and floral notes. On the palate, it delights with flavors reminiscent of sweet candy underscored by subtle fuel undertones. With THC levels reaching a high of 24% and minimal CBD content, Fatso GMO F1 Auto delivers a balanced and uplifting effect, appealing to enthusiasts seeking a satisfying and harmonious experience.

Great easy cultivar to grow, even with the pythium issues in the higher temp DWC. The harvest was very resinous, the terpenes are amazing. The final weight should be pretty good, plants are finishing dry, I'll post dry weight when known. Thanks for hanging out and watching this girl grow :)😎

Hello everyone 😎 Week 2 for my girl it’s time for Topping & some LST🔪 Knife used : Samouraï Plus 😂 She is doing very well,growing at fast pace and with a beautiful green colour on the leaves. Have a nice day 😎

Started the grow out trying to do an organic run with foop nutes, was never able to stabilize the ph and started notice problems in the leaves. Got on Amazon and bought the ph perfect line from advanced nutrie

Day 49: She is back on Day 51: She keeps pushing strong. Ive used some LST to even out her height. Also defolaited a bit every day and removed some lower bud shoots. Summary of how I got her back: The problem I have identified was slight overwatering and too high temperatures. Thats why her leafs hang down in veg, and are now cupping a bit in flower. Unfortunately I cant get the temperatures down much. When possible, im decreasing the lights during the day, and increase them at night while pulling cold air. Current night temperatures are around 15C, but I only reach arround 23C with 60% rh in the tent. This should be fine, but the leaf temperatures are probably a bit higher. I also hang the light as low as possible right now since that also helps with the temps. I keep the lights at about 45%, which results at 20h at a dli at roughly 38. A bit of an increase in the night times will hopefully push this to 45 overall. Also fed her today with 1 silica | 1,5 calmag | 2 grow | 1,5 micro | 1,5 bloom. She took 2,5 l of water.

Blue Cheese F1 automatic Week 11 Flower 7 Blue Cheese 1 is in her last week; March 17 Blue Cheese 1 that was planted in coco had her wet trim and was put in the dark for 2 days before getting the chop on March 20. Blue Cheese 1 shows fade and nutrient usage in the upper leaves. I also see pinks and purples in the buds and leaves. They look pretty with lime greens, pinky purples in the bud formation. The buds are stacking fatter and packing on more resin on the buds which are sticky and hard. The trichomes look mostly milky with some amber as well. The stems are strong and support the heavy buds. Blue Cheese 2 in soil will remain with her tent mates Pink Rozay & Love Potion. After flushing excess nutrients out of the soil and plant, Blue Cheese 1 in coco is matured faster than Blue Cheese 2 in soil. Blue Cheese 2 shows trichome formation starting to milk up compared to BC1. Her leaves are still green with no fading. The older pistils are turning orange brown and water consumption is slowing down for both girls. She still needs a few more weeks before I’ll start flushing. Blue Cheese 2 was fed on March 17 & 19. Pics were taken on the 17th. Bloom Juice 120 ml Royal Rush 0 ml Power bud 15 ml Green sensation 15ml Cal Mag 20ml Recharge 5ml Ppm ranged from 676-777 Ph 6.5 Temp 68 Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫

🥊 🍼Greenhouse Feeding BioGrow & Bio Enhancer ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 🌱 FASTBUDS 420

Flushed HARDCORE this week!! Ladies are not looking well nor do they seem like they’re reacting to the flush well either!! Almost seems like they’re locked out but also having deficiencies! I could use some advice on this. 3/5 of the taller plants have yellowed out and the other 2 look great!! Pretty much all the same watering and neuts. I think the issue was that I’m using fabric pots and not allowing enough penetration to the bottom and it created a salt pocket. Correct me if I’m wrong Updated a few more pics of the deficiency/lockout issues all the help is appreciated thanks to everyone whose chiming in and helping!! Y’all the real deal!!

I think this should be the last week of flower, as the trichomes are almost completely cloudy and some start to turn a light amber. I’ll let them sleep in complete darkness for two days at the end of week to slowly start the drying process and push some colour. I’m more then satisfied with how my first run turned out so far, I could have done a lot of thing better, but I’m still happy with the end result. I learned a lot from my first grow, also with your help :) Thanks to everyone who was giving me advice or helping me out with my questions I really wouldn’t have thought, that special queen 1 has such an amazing smell, it’s crazy how different all 4 smell and feel. Four completely different phenotypes, but really happy with every single one of them. Update Day 119/ Harvest Today I cut the plants and hang them in my grow tent for drying, trying to get around 60% humidity and 20C. Fans on level 3 one on the top one at the bottom. I’ll update as soon as they are dry

Lemon Cake & Lemon Drizzle Week 5 This week 5/5-5/11 Germination April 6. Vegetation Week 1 water only Week 2 water only Week 3 added recharge and TPS1 increased ppm to 570. Week 4 continues with recharge and TPS1. I added Fox Cal mag increasing ppm to 685 - 805. Week 5 TPS1 9ml/gal Recharge 5 ml/gal Fox Cal-mag 5 ml/gal This was an exciting week for my ladies. It started out with the usual feed and defoliation and training. With my upcoming vacation, I am going to be hardening off these ladies to relocate to their outside location. I checked the expected weather forecast for the week. Looks good to start hardening off. Partly cloudy with temps in the low to mid 80s just like in their tent. So that’s good. Night temperatures were in the 50-60s. This is much cooler than what they are used to as our house is at 73. Our summers are hot and humid with frequent thunderstorms. They need to get used to what mother nature will provide. I had planned to bring the plants back in the sunroom but since conditions were similar, I let them stay outside every night. And every night but 2 it rained. I did not water or feed nutrients this week. I am attempting the scrog technique on all plants. I am using a peony cage as the support structure. The cages are about 2 feet high. This may not be enough side or top support as she grows and may have to resort to tomato cages. Took pics May 6,9, & 11 Lemon girls both had mutations at germination. Lemon Drizzle split ot topped herself. This creates two main plant stalks. The primary and a smaller secondary stalk. Lemon drizzle has stretched above the scrog top opening up her structure. Today she has an erratic top canopy in multiple levels with multiple bud sites. Interesting her nodes have for this week started to develop off set from each other. Does that mean she is going into flower sooner than expected? Thanks for the visits, likes and comment, I appreciate all the plant love💚. Have fun & love what you grow 💚 Sending you good vibes of love, light, and healing 💫 💫Natrona 💫 BARNEYS FARM- LEMON DRIZZLE Lemon Drizzle Cannabis Seeds Type: Feminized Weed Strain Lemon Drizzle Strain by Barneys Farm Indulge yourself in the tantalizing aroma of our Lemon Drizzle strain, a sensually crafted cannabis strain that is sure to tantalize your senses and leave you in a state of blissful euphoria. Bred from a seductive blend of Super Lemon Haze and OG Kush, this sativa-dominant weed strain will transport you to another plane of existence. With a flowering time of 60-65 days, Lemon Drizzle's exquisite buds are bursting with a potent THC percentage of 20-25%, ensuring an unparalleled and satisfying high. The complex terpene profile of this alluring strain is sure to captivate your senses with notes of zesty lemon and a hint of earthy Kush undertones, providing a flavor explosion that you won't forget. This tempting beauty grows to a height of 1m - 1.2m indoors and 1.5m - 2m outdoors. You'll be impressed by the generous indoor yield of 550g/m2, while the outdoor yield of up to 1.5 - 2kg is beyond substantial. Experience the ultimate in relaxation with Lemon Drizzle's outdoor flowering time, which begins in early October, allowing you to bask in the sweet sunshine and savor the heady effects of this tantalizing strain. Succumb to the charms of our Lemon Drizzle strain and discover a world of unadulterated pleasure that will leave you in awe. Is Lemon Drizzle Indica or Sativa? The Lemon Drizzle strain by Barneys Farm is 85% Sativa 15% Indica. What is the best way to store my Lemon Drizzle strain seeds? To properly store Lemon Drizzle seeds, it is recommended to keep them cool and dark in an airtight container ideally in a refrigerator with proper labeling and dating, avoiding freezing. Lemon Drizzle Cannabis Seeds Strain Specifications Type: Feminised Genetics: Super Lemon Haze Strain x OG Kush Strain Photoperiod: Normal Sativa %: 85% Indica %: 15% Flowering Time (days): 60 - 65 Feminised Outdoor Harvest Month Week: 1st-2nd week - October Indoor Height (cm): 100-120cm Indoor Yield (g): up to 550-650 gr/m² Outdoor Height (cm): up to 150-200cm Outdoor Yield (g): up to 1500 gr/plant Taste: Sour, Lemon, Sweet, Citrus Fruits Aroma: Sweet, Sour, Citrus, Pine, Earthy Effect: Energizing, Uplifting, Focused, Motivated PREMIUN CULTIVARS LEMON CAKE Lemon Cake Seeds Lemon Cake strain seeds generate typical Sativa buds known for their heavy trichome covering against a bright green background. Let's look at this great strain and learn about its genetics, growing information, and how to obtain it. Cultivar Profile Terpenes Caryophyllene, Myrcene, Terpinolene Strain Type Sativa Difficulty Moderate Height 30 in – 78 in Yield (oz/ft2) 1 – 3 Flowering Time 9 – 10 weeks Harvest Month October Pack Size 3, 6, 12, 24 Seed Type Feminized Brand Premium Cultivars The History of Lemon Cake Strain Seeds Lemon Cake by the European-based firm Heavyweight Seeds is a strong Sativa-dominant hybrid of Lemon Skunk and Cheese. Lemon Cake seeds are easy to cultivate, especially outdoors, with a 9-10 week flowering cycle, squat shape, and large output. How to Germinate Lemon Cake Strain Seeds There are several ways to sprout your Lemon Cake strain seeds, but they are more complex, inexpensive, and efficient than the paper towel technique. Premium Cultivars suggests this method since it is simple to implement, involves commonly available tools, and ensures germination. Here’s a 9-step process for geminating Lemon Cake seeds: 1. Collect your essential tools: Lemon Cake seeds, dinner plates, distilled or bottled water, tweezers, and a working table. 2. Wet your paper towel sheets and gently squeeze the excess water. 3. Set one of the paper towels on the dinner plate and the other aside for later usage. 4. Pick your Lemon Cake strain seeds with tweezers and spread them on the towel sheet, allowing an inch between them. 5. Cover your cannabis seeds using the second paper towel. Check if the towel is moist, and if not, add water. 6. Lift the towel sheets and ensure no standing water is present. Return the paper towel and your Lemon Cake seeds carefully. 7. Place the setup in warm, dark areas, particularly a cupboard or drawer (20-120 hours). 8. Check to determine whether your Lemon Cake cannabis seeds are sprouting regularly, and if the paper towel remains moist, add water if it does not. 9. Once taproots have emerged from your Lemon Cake seeds, transplant them to your ideal growing medium. Why are Feminized Seeds Better than Regs? Feminized cannabis seeds yield only female plants (or around 99.9% female). Conversely, regular seeds generate a mix of male and female plants. Each seed strain has advantages and cons, with the grower’s specific needs ultimately determining the best. Gardeners mostly use regular cannabis seeds to create their strains, but feminized cannabis seeds are great for farmers looking for a cannabinoid-rich, bud-producing crop. Male cannabis plants generate just pollen sacs and no resinous blooms. This resin contains cannabinoids and terpenes, which are responsible for cannabis’ desirable properties. If male plants pollinate female plants, their blooms will cease releasing resin and begin producing seeds. In short, male cannabis plants do not aid in pursuing massive, powerful harvests. Nonetheless, male plants are critical to the survival of the species as well as the breeding and improvement of cannabis strains. So don’t dismiss them right away! Growing Lemon Cake Strain Seeds The Lemon Cake cannabis strain has grown in popularity due to its ease of cultivation and high yields. It’s a medium-sized plant with long branches that can use some assistance toward the end. It is rather ordinary in terms of temperature and disease resistance since it is not overly prone to unfavorable circumstances or pests. However, if you grow with hydroponics, you won’t have to bother with any of that. Should I Grow Lemon Cake Strain Seeds Indoors or Outdoors? Lemon Cake thrives in both indoor and outdoor environments. The height of this cannabis strain is one factor to consider: it can reach heights of 200cm, requiring either a large grow space or a yard to attain its full potential. Growing Lemon Cake Strain Indoors If you want to cultivate your Lemon Cake seeds (you can buy these finest seeds from Premium Cultivars) inside, you should invest in exhaust fans or carbon air filters due to the room’s strong odor. Also, if conditions are ideal, growers should expect a large yield after 9-10 weeks of flowering. Growing Lemon Cake Strain Seeds Outdoors Outdoor growers can harvest their Lemon Cake buds around the middle of October. How Much Do Lemon Cake Strain Seeds Yield? Lemon Cake can produce roughly 25 ounces per plant outdoors and 21-25 ounces per square meter when grown inside. Although you might be tempted to cut it down right away, waiting as long as possible before harvesting it and curing it correctly to enhance the quality is recommended. How to Get Better Yields from Your Lemon Cake Strain Seeds Harvest rewards are frequently a mirror of cultivation care, so be kind to your Lemon Cake plants, and they will be gentle with you. However, growers should regularly top and prune their Lemon Cake plants to improve airflow and light exposure, thus raising yields. The Best Grow Medium for Lemon Cake Strain Seeds Cultivators can grow Lemon Cake seeds in hydroponic or soil systems. However, experts propose using a precise hydroponic arrangement to achieve optimal production and control its occasionally unpredictable growth rates. The Best Climate for Lemon Cake Strain Seeds Lemon Cake strain enjoys warm, semi-humid areas and is inherently resilient, having excellent mold and disease resistance. Growing outside is only acceptable in warmer climates, as this cannabis strain needs sunlight. Problems to Look Out For When Growing Lemon Cake Strain Seeds When cultivating Lemon Cake cannabis seeds, the primary issue to watch out for is dehydration and overwatering when the crops are little and susceptible. If the leaves of your Lemon Cake plant turn yellow, this indicates that the plant isn’t receiving enough oxygen to the roots. How Difficult is it to Grow Lemon Cake Strain? One of Lemon Cake’s noteworthy characteristics is its simplicity of cultivation. Are Lemon Cake Strain Seeds Suitable for Beginners? Yes, these cannabis stain seeds are great for novice growers, and they will obtain outstanding results. The Best Grow Techniques for Lemon Cake Strain Topping Topping encourages the plant to grow horizontally rather than vertically, but when it does so is determined by soil condition, plant health, light, plant size and age, and growth goals. Topping cannabis reshapes the crop in a way that improves light dispersion significantly. Cutting one tall branch to make multiple new ones at the same height guarantees that lower (buds on lower branches) also receive more light. Another essential reason to top your cannabis crop is for better height management. Logically, the two new branches develop slower than the one branch. Topping a cannabis plant separates its development into several branches. Making the plant grow less in height while putting more energy into expanding broader. This is incredibly convenient for growers, especially for limited indoor plants. Trimming Trimming can be an excellent technique for cannabis producers who have been cultivating a plant for a long time to connect with it while boosting the quality and form of the buds. There are two methods for trimming cannabis plants: wet and dry. Wet trimming, as the name implies, happens when the cannabis plant is still wet. This means you harvest your plants and immediately begin the trimming procedure. Conversely, dry trimming will necessitate drying your crops out for a few days before you start trimming the bud. If you’re cultivating cannabis at home, you’ll almost certainly have to perform all this by hand. For devoted producers, machine trimmers are available, making the operation considerably less labor-intensive. However, due to their high cost, commercial farmers mainly utilize them. Trimming can be time-consuming for many growers, but it’s also thrilling since the growth process is almost complete, and your cannabis is almost ready to have. After you’ve completed trimming, there’s one more step left until you have a great bud: curing. Pruning Pruning is the practice of eliminating extraneous shoots, branches, and leaves from a plant to push it to redirect its limited energy into its present and established development. When left to its own devices, a cannabis plant will frequently grow too large to sustain itself properly with the quantity of energy it generates. If left untreated, this can lead to several minor bud sites as the plant strains to survive while creating bud during flowering. By eliminating unneeded and weak growth, you push the cannabis plant to focus on what remains, resulting in a stronger plant capable of producing a few huge buds rather than many little ones. This frequently leads to higher total yields. Equipment and nutrients Pots: 5gallon Air pots Soil Fox Farm Happy Frog Amended with worm castings, dolomite lime and mychorihiza Recharge ================================= Equipment: AC Infinity CLOUDLAB 844 – Advance Grow Tent 48”x48”x80” CONTROLLER 69 PRO – Grow Tent Controller CLOUDLINE LITE 6 - Inline Fan 6" IONBOARD S44 – LED Grow Light Board 400W CLOUDRAY S6 – Oscillating Circulation Clip Fan Carbon Filter 6”

Sky Walker ~~~~~INDOOR~~~~~ DAY 134 Above Dirt 💬SUNDAY 01.06.24 - Lots of work on these 4 plants this weekend, started with doing a 21-day in-flower super defoliation and pruned out lots of lower Larf along with a few center colas to open up the plants, each one took around an hour to clean up, secondly, top dressed with 7 Table Sppons Gaia Green, (5T) Bloom and (2T) Grow, 2 cups Worm Castings, 4 cups Botanicare Organicare True Earth Potting Mix, this stuff is amazing! 📝IPM, Added a couple of Handfuls of Mosquito Bits, to ensure that no fungus gnats are breeding in the soil, (Read Below), in the morning before lights out will be using Mammoth CannaControl these bushy plants managed to get a small amount of White Powdery Mildew and this stuff will knock it out! 📝Mosquito bits are small pellets that contain an active ingredient called Bacillus thuringiensis israelensis (BTI). BTI is a naturally occurring bacterium found in soil that's particularly effective at killing mosquito larvae, this will also kill Fungus Gnat Larvae. ~~~~~~~~~~~~~~~ 🌱Sky Walker 👨‍🌾🏽Sativa Jones 🌤️@Medicgrow420 SeedBank Seeds 📝@gaiagreenorganics 📝Bokashi Biochar ~~~~~~~~~~~~~~~ 📝 Skywalker OG Strain is a top-shelf Indica dominant hybrid. It is a cross of Original Amsterdam Blueberry, OG Kush, and the indica strain Mazar from Afghanistan, and is best known for its super potent effects and sky-high THC levels.

la seconda pianta ossia quella che non era ermafrodita è stata impollinata solo nel ramo in diretto raggio del ventilatore, forse avrei potuto pensarci, comunque ho 12 semi, per il resto non ho trovato molti semi e sono soddisfatto nel complesso, la pianta non ermafrodita ha avuto un esplosione di tricomi, veramente piena, per altro le cime sembravano pesare molto, per adesso stanno seccando, di muffa ne ho trtovata poc e niente

Possibly transplanted into oxy pot a little early. But seems to be settling in now. Just need some more root development. Root Update 27/8 - both oxy pot and 5 plants still in grow cubes, have all had a good increase in root development over night - 27 August Root Update 28/8 - all grow cubes and one in oxy pot developing well. Set up: 1 CFL 300w Dual Spectrum light with reflectors 1 kaizen carbon filter and air out. 1 eco fan air in 1 oxy pot 1 9 inch oscillating fan