Likes
Comments
Share
@LiamF
Follow
1.8L with nutes on day 44 1.5L water only on day 47 2L with nutes on day 49 I Did some defoliation, cut some fan leaves and very small branches, I Know its an auto and you shouldn't, but those leaves blocked a lot of light. She's acting pretty weird this week Her leaves get wilt at the end of the day(light cycle) and stay like this for couple of hours and then rises back up. I know they usually drop their leave at the end of the day but this is not the case because its stay like this hours after lights goes on. WOW! shes still getting taller even its her 3rd week of flowering! WTH
Likes
Comments
Share
@k0nz1
Follow
Week 2 coming in hot. Plants switching to Turbo Mode. In a few days the new setup ist ready. Just watching the Ladies grow for now. 24 celsius 58 RH Next is transplanting and topping
Likes
2
Share
@Robalo
Follow
Sin nada de abono liquido,solo en sustrato
Likes
27
Share
@Bncgrower
Follow
Harvest done, I believe the result would be better if it hadn't suffered so much. But it's within expectations, let's see how it turns out after the drying and curing process..
Likes
47
Share
@Jimmy89
Follow
The the buds were small so it made trimming a nightmare! But it’s done and the end product is worth all the time. I have loads of trim and small popcorn buds that will be dry Ice sifted and pressed into a hash brick. Will update the diary when I have some bcp hash Weighed up the trim at 588 grams, used my trim bins with dry ice to sift the trim and pressed it into blocks using a rosin pre press, I’ll now jar this and put it to one side. My first time doing this, definitely worth the effort!
Likes
Comments
Share
@Luxengrow
Follow
Easy week once again in the living soil pot, adding in just a mild chamomile based aerated compost tea with some microbes to gently feed the soil
Likes
83
Share
🤖 💙 🍪 👾 💚 👽 🤖 💙 🍪 👾 💚 👽 🤖 💙 🍪 👾 💚 👽 Welcome dear space travelers! 🤖 💙 Week 1 is here, and we have nothing to do except for a bit rain here and there! 💦 Spraying Fast Plants Spray every 2 days. Thanks @James for the goodie pack, always an honor and pleasure to grow for RoyalQueenSeeds! 🙏 💚 💨 Thanks @Green_Buzz_Nutrients for sponsoring the nutrients for this grow!! 💚 💚 💚 Amazing product line!! 🌞 🌱 If you like to try them, you can find a generous discount on their products in my setup description!! ⬇️ Thanks @MedicGrowLED 💚 I love the Light!! 🌞 ___________________________________________________________________________________________________________________ Cosmos F1: The World's First F1 CBD Cannabis Variety Cosmos F1 is the largest autoflowering cultivar in our catalogue of F1 hybrids. With her tall, typical Christmas tree structure and bright green foliage, Cosmos F1 is a testament to the beauty and vigour of Cannabis sativa. Plus, thanks to her pure genetics, which descend from a high CBD strain in Oregon, she boasts the highest CBD concentration in our entire F1 seed selection. Aromas, Flavours, and Effects of Cosmos F1: A Vibrant CBD Super Variety True to the pure lineage from which she descends, Cosmos F1 boasts a delicious aroma that combines the freshness of crisp pine with the full-bodied, almost creamy aroma of modern Cookies varieties, and an unmistakable peppery bite. Thanks to her high concentration of CBD and low levels of THC, Cosmos F1 offers a balanced effect without intoxication. Cosmos F1’s terpene profile is dominated by myrcene, farnesene, limonene, pinene, and caryophyllene. Combined with high concentrations of CBD, Cosmos F1 produces a clear, meditative effect that relaxes the body while leaving the mind functioning and focused. Her effects help unite the mind and body, creating a state of cosmic order. Growing Cosmos F1: A True Sativa With Pure F1 Strength F1 hybrid seeds offer unbeatable uniformity and stability, and this is particularly true of Cosmos F1. She exhibits strong hybrid vigour and produces plants that grow to the same height and develop the same tall, elongated structure. She flowers automatically and is harvest-ready in 80 days from germination, at which point her many bud sites will be laden with long, wispy flowers characteristic of her sativa genes. Flowering time: 45-55 days 🚀 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/619-cosmos-f1.html _______________________________________________________________________________ SETUP: 80x80x180 cm Zelsius Medic Grow MINI SUN-2 240W Full Spectrum LED Built-in Timer LCD Display high PPFD of 2300μmol/m2/s @ 6 ’’ in height, efficacy is up to 2.8μmol/J, and PPF is up to 672μmol/s built in controller with timer and dimmer www.medicgrow.com Green Buzz Nutrients Shouts go out to my sponsors @GreenBuzzNutrients, thanks so much for your support! 💚 💚 💚 If anyone would like to try their amazing organic products, use code GD42025 for generous 25% discount (for orders of minimum 75€) ✨ https://greenbuzznutrients.com/ custom exhaust fan 320/270cm³/h Carbon Active Granulate 240cm³/h tab water pH 8 - EC 0,25 with Calmag to 0,5 Advanced Hydroponics pH minus Grow + Bloom to pH 6.2
Processing
Likes
38
Share
12/9/2017 - The stretch these girls put on when they hit flower is insane. I'm getting ready to add bamboo stakes for support because I already can tell they are going to have massive nugs on them. They jumped from 9-10inches tall to just shy of 24 inches in under a week. They have now stopped all veg growth and are starting to pack on pistils already. I just got a new bottle of mammoth P so that will be added back into the nutrients starting now. 12/12/2017 - Definitely 2 completely different phenotypes. One is extremely tall (30 inches from pot) and stretched out with a bunch of long side branches. The other is shorter (24 inches from pot) and bushier. It will need some leaf tucking during flower for sure. They are both responding very well to the environment and nutrients (I got more mammoth p finally!!!) I've also used bamboo chutes and this gardening velcro tape stuff that I love to support all of the branches. Based on my Gold Glue grow these plants are about to produce some monster buds that the branches wouldn't be able to support.
Likes
10
Share
@NSABND
Follow
today Day 22 and Hilde still goes well 🙏 Speedrun video 21 Days 😉 Day23 was cloudy an alot of rain 😩 Day24 was cloudy and alot of rain 😳 Day25 there was sun and not too hot 🙏 Day26 in the afternoon a really sunny day but it started cloudy and rainy oh lord 😯 Day27 full of cloudy rainy weather and low temp 😕 Day28 no sun and cloudy 😒 Enjoy Speedrun week 4 😉
Likes
4
Share
Enseño todo, la planta, sus bichos, oídio y un poco de botrytis. Hay bastante arañas pero prefiero esto que poner insecticida encima de los cogollos. También hay unas manchas de oídio encima de unas hojas pero nada encima de los cogollos. A pesar de todo esto después de la cosecha los cogollos tienen buena pinta.
Likes
7
Share
@Dunk_Junk
Follow
Good leaf growth this week. She looks a little overwatered at the time of pictures. I will let her dry out for a few days now to see if that perks her up a bit.
Likes
7
Share
@603grower
Follow
Today marks day 21 girls are looking great! They are stacking beautifully. Finally starting to get some smells very weak though. But I am seeing frost on the runts layer cake and the rucu cucu og. It’s gonna be water based not this week sense I’ve gone heavy the last few weeks Day 19 girls got some recharge and 10 ml of surge. Threw in a tbs of the terp tea bloom but I don’t think it did anything since it’s was a small amount and I diddnt aerate it. Day 16-17 small defoliation with a lollipop
Likes
8
Share
Week 1 of Veg, here we go! Watering with 1/2 Oz of water every other day. Day 10, Now watering with 1oz. The crystal widow is growing happily!
Likes
69
Share
Eternity Grow Cup - Week 11 VEG Report This is a pivotal week in our Eternity Grow Cup journey as we wrap up VEG and prepare to transition into FLOWER. Our goal has been to ensure that the plants are thriving and optimized for the next phase. This report will detail everything that took place during this crucial week. Mass Defoliation & Structural Training We began the week with an extensive defoliation session. Every leaf with a stem was removed to clear space for optimal light penetration and airflow. This process was done mostly by hand, clicking them off in the opposite direction of growth, while some stubborn ones were snipped with scissors. By the end, it felt like we had taken out nearly half a kilo of leaves! The room now looks clean, structured, and ready to fill out the ScroggNet. To further enhance the plant structure, branches were attached to the pots, allowing for better horizontal growth. This technique helps maximize canopy exposure and prepares the plants for even light distribution once flowering begins. Defoliation before flowering is a key step as it reduces overcrowding, improves airflow, and sets the plants up for efficient energy use in the next phase. Light Schedule & Adjustments This week, we introduced a subtle but effective light adjustment. While still maintaining an 18-hour light cycle, we initiated a 15-minute delay with the whites, allowing the reds to start first. This gradual shift signals the plants that a change is coming. Similarly, at the end of the light cycle, the whites turn off 15 minutes earlier, leaving the reds on for an extended period. This strategy mimics natural sunrise and sunset, helping the plants transition more smoothly into flowering. Additionally, at the end of the week, we will be implementing 48 hours of darkness before the official flip to flower. This method has worked exceptionally well in past grows, helping plants recognize the transition and encouraging a strong start to flowering. However, it's important to emphasize that this is a personal technique and not a universal rule. Every grower should experiment with different methods to find what works best for their specific environment. Environmental Conditions & Challenges Currently, our temperature is at 27°C with 60% humidity, resulting in a VPD of 1.50. While slightly higher than the ideal for VEG, our CO2 levels are over 1000 ppm, and the light intensity is at 570 PPFD, making it a manageable balance. The solution pH is 5.79 (essentially 5.8), EC is 1.38, and water temperature is 17.7°C. One challenge we are facing is maintaining optimal reservoir temperatures. Currently, it's a bit low at 17.7°C, and we are exploring solutions to raise it slightly. However, the medium temperature sits at 22.2°C, which is a good range. The humidifier is still in use, though it struggles to increase humidity further, so we are working with what we have to keep the VPD in check. ICL-300s Integration The ICL-300 lights are now fully active. Unlike the last grow, where we introduced them later, this time they are on from the start of flowering prep. This adjustment is an experiment to see if the plants respond better to an early introduction. Learning is at the core of this journey, and each grow offers new insights. Whether this proves to be the optimal strategy or not, it will be a valuable lesson for future grows. TrolMaster Hub & Data Monitoring Throughout the week, we have been closely monitoring our grow using the TrolMaster App TM+. We are displaying some of the collected data for everyone to see the details. Stay tuned as we explore this further in the next report! As always, we want to extend a huge thank you to our sponsors and the amazing community. Special thanks to Aptus, Groovebags, Cannakan, Promix, Ziggy Papers, TrolMaster,and Plagron, Zamnesia and Grow Diaries for making the Eternity Cup possible. I apprecilove the support from all sides—lovers, haters, competitors, and fellow growers. The competition continues to push us to improve, and i am thrilled to see the incredible reports from others. This is a challenging yet rewarding experience, and i couldn’t be happier to be part of it. For those following along, we invite you to check out our YouTube channel, where we upload full 4K episodes showcasing the entire journey. Some episodes are too large to be uploaded directly to Grow Diaries, so YouTube is the best place to catch everything in high definition. This marks the end of VEG, and we are officially ready to flip to FLOWER. Next week, we will dive into the TrolMaster System in action, check the data insights, and monitor how the garden adapts to the shift. Stay tuned! Growers Love to all, happy growing, and best of luck to all competitors! See you all in the next update! Genetics - Runtz https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html Nutrients - Plagron https://plagron.com/en/hobby - Aptus Holland https://aptus-holland.com/ Controls - Trol Master https://www.trolmaster.eu/ LED - https://www.futureofgrow.com/en LED - https://www.thinkgrowled.com Soil - https://www.promixgardening.com/en Germination - Cannakan https://cannakan.com/?srsltid=AfmBOopXr-inLXajXu3QFgKXCXXos4F1oEvScjMKIB5MR5dk8-GJ-F49 DOGDOCTOR 15% off Smoking Papers - https://ziggioriginal.com/ Terpene saver - https://grovebags.com/ As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciloved and i fell honored with you all in my life With true love comes happiness Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. The journey with nature is one of discovery, creativity, and respect. Let’s celebrate it responsibly and continue to learn and grow together! Growers Love To you All 💚 #EternityGrowCup #RuntzHunt #GrowersLove #CannabisCommunity #AptusHolland #ProMixSoil #TrolMaster #Zamnesia #Plagron #ZiggiPapers #Grovebags
Likes
9
Share
@Xabii
Follow
This is the start of my second grow and also second Northern Light Auto from RQS, the goal is to hit #1 in g/plant for that Strain. I didn't take as many notes as in the last grow but there are timelapses, some photos and metrics from probes. Started with 3 Seeds and then picked the 2 strongest. The System is a NFT System but due to the size of the tube and root growths the solution with submerge the roots ~70% later on. To combat that I use 3 small 1.5w air pumps, these are super silent, if one dies I got 2 more running and to be honest air pumps used in DWC systems are often oversized and rely on Broscience. In my Salad/Herb NFT Systems I don't use any air pumps and the plants are just fine and grow great. This time I added sprinklers to humidify the air inside the tube, slightly moisturize the Rockwool and speed up root growths. Spoiler: Was a great success :) The ratios for the fertilizers are not accurate in the following weeks, I have a 120l Reservoir that is filled 90-110l I top it up once or twice a week to sustain PH and EC, if you want to copy it just go by the EC and use the B (Calcinit) and A (Kristalon Blue/Orange) 50/50. I mix the solution myself with dry salts that I bought in bulk 25kg bags. 4l Water(distilled/RO preferably, tap water is OK) + 1kg salts mixes just fine, keep the solution dark and cool and it will stay stable for months. Dry salts don't expire if kept cool and dry so only mix what you need and keep the rest stored as dry salts. 40ml A + 40ml B is about 2EC and 6PH with my tap water, very similar to Canna, Plagron etc. isn't it? just with the twist that I pay ~20% of the known brands. P2O5, K2O, MgO etc. are always the same as long as they are produced by a good manufacturer, Yara is a world leader in fertilizer production just not to be found in you general hydroponics or hardware store. Any other known manufacturer is fine as well, pick the cheapest. Check Hoocho on Youtube to see a guide on how to mix your own solutions, it ain't that difficult trust me. From week 5 onwards I also use Oxygen granulate (KMPS, CAS-70693-62-8, 2KHSO₅ * KHSO₄ * K₂SO₄) if you want to use this check pool supply stores and buy the cheapest. Keep this one dry, cool and dark. I used a old pill bottle to keep some ready to go because it came in a 1kg container and I only need 2-4g per serving + the bottle has a silica pack in the cap. From week 6 onwards I used Haifa Grow Clean for Details check week 6, I use this one as dry salts and add it directly to the tank, it does not interact in a bad way with the solution. For meassurements I use a generic 8in1 Meter "PH-W218" branded by many companies, as usual, check stores and buy the cheapest. (Check week 1 for an image of it) I got mine from Aliexpress for ~70€ it uses the Tuya app so you can always check your metrics and export them aswell. The PH and EC probe are accurate and are giving me stable results for almost 1 year now, I re calibrate the PH probe once in a while and it is tops 0.15 off after a month, always double check your results with PH drops/paper. Bluelab is... A LOT more expensive for less value. For the timelapses I use 2 Tappo C210 2k Cameras, these have the ability to make the stream available trough RTSP so that you can access it trough a link in a browser and that way I snap a Screenshot with a raspberry pi :) after that I just render it with blender to a timelapse. Sadly they seem to have trouble with the bright lights and I get image trouble over the course of the day, if you have a recommendation hit me up :) The script I use to take the Images: #!/bin/bash ########################################################################################################################################## ##### A script to save images from a rtsp capeable IP cam, Tapo C210 (2k image quality) for example in my case. ##### Images are saved in a directory named "2024_01_01" for example, it uses the "date" command within the system it is running on. ##### You can then render the images to a timelapse, I use blender for that. ########################################################################################################################################## RTSP_URL_LEFT="rtsp://:@:/stream1" #sets the variable for cam LEFT access RTSP_URL_RIGHT="rtsp://:@:/stream1" #sets the variable for cam RIGHT access while true; do TIMESTAMP=$(date +"%Y_%m_%d_%H_%M_%S") #sets the timestamp variable DIRECTORYLEFT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for LEFT DIRECTORYRIGHT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for RIGHT mkdir -p "${DIRECTORYLEFT}" #makes a directory for each day if it doesn't exist for LEFT mkdir -p "${DIRECTORYRIGHT}" #makes a directory for each day if it doesn't exist for RIGHT ffmpeg -y -i "${RTSP_URL_LEFT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYLEFT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for LEFT ffmpeg -y -i "${RTSP_URL_RIGHT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYRIGHT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for RIGHT ################################################################################################################################ ##### Waits for 180 seconds, change that depending on how precise you want the timelapse to be, less waiting = more images ################################################################################################################################ sleep 180 done Hope you like my diary, leave a comment and a like if you like it :)
Likes
4
Share
Looking like 3 more weeks until harvest. I’m going to start flushing in about 10-12 days
Likes
26
Share
@GroloCup
Follow
We'll call this the beginning of week 1, she's up and growing. The MegaCrop should push her growth a little and really get her off on the right foot. Debating topping or LST, not sure how this one's gonna play out, but I'll see how fast she make a vertical move before the final decision is made. Thanks again to Zamnesia and Plagron for the opportunity to grow some dank buds!
Likes
3
Share
This week the Jack Herer has exploded. The branches have become dense, swollen buds with lots of pistils that are turning orange. The smell has become much more intense and citrusy, however, I think it is further along that it should be. So far this seedling is growing nicely. I hope it continues like this
Likes
20
Share
@Hashy
Follow
Week 7 Light cycle=12/12 Light Power=196w Extractor controller settings High temp= 25c Low temp= c Temp step=0c High Rh= 56% Low Rh= % Rh step=0% Speed max=10 Speed min=2 Smart controller settings (during lights on). Lights on=10.00am Radiator on= below 21.5c Radiator off= above 22.5c Smart controller settings (during lights off). Lights off=10.00pm Radiator on= below 18c Radiator off= above 19c VPD aim=0.6-1.4 DLI aim=28-34 EC aim=1.9 PH aim=6.3 Thur 8/2/24 #2 (Day 43)(Day 11 flower) 📋 H=79cm D=20cm DLI=50.5 Raised light 5cm. Lowered power from 200w to 180w H=79cm D=25cm DLI=43.5 Hst 4 colas. Extractor controller settings High temp= 24c Low temp= c Temp step=0c High Rh= 50% Low Rh= % Rh step=0% Speed max=10 Speed min=1 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 22.0c Radiator off= above 23.0c Dehumidifier on= not in use Dehumidifier off= not in use Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Dehumidifier on= not in use Dehumidifier off= not in use Fri 9/2/24 #2 (Day 44)(Day 12 flower) 📋 H=81cm D=23cm DLI=44.5 HST 4 colas Sat 10/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=bloom nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=1.0ml/L Terra Bloom=4.0ml/L Sumo Boost=1.5ml/L Roots=0.2ml/L Easy Ph down=0.115ml/L Ec=1.9 PH=6.3/6.5 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L(13.5L) Total volume left=3L Total volume used=10.5L Volume per plant=2.6L (Est) Runoff. Total runoff=1.0L Ec=2.3 PH=6.0/6.2 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #2 (Day 45)(Day 13 flower) 📋 H=81cm D=23cm DLI=49.5 Raised light to maximum height. 180w H=81cm D=31cm DLI=48.0 Hst 4 colas. Sun 11/2/24 #2 (Day 46)(Day 14 flower) 📋 defoliation on some lowers. Mon 12/2/24 #2 (Day 47)(Day 15 flower) 📋 H=87cm D=25cm DLI=51.0 Tue 13/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Roots=0.2ml/L Easy Ph down=0.02ml/L to much Ec=0.2 PH=5.3/5.7 Ec=0.2 PH=6.1/6.2 after 3L top up. Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L(16L) Total volume left=6.L Total volume used=10.L Volume per plant=2.5L (Est) Runoff. Total runoff=1.2L Ec=1.95 PH=6.1/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #2 (Day 48)(Day 16 flower) 📋 Wed 14/2/24 #2 (Day 49)(Day 17 flower) 📋 H=93cm D=19cm DLI=65.0 HST 4 colas. She is doing great, broken cola is in good shape now. Struggling with height as the light is as at max height. I'm really going to have to chop a load of tops or bend it as much as possible. Back soon. Take it easy.