Trocando a configuração de Dwc para coco, calor está forte neste verão elas responderam bem ao super croping, mais eu não tenho espaço no quarto de floração então elas estão esperando

One more week and they have grow really good this week nice buds and I hope 🙏It continue to grow more and more and more .I put a net because my gelato is to branch and she can’t kept the buds height ,my fault. Very happy with this grow 🙂

This is the best scent I’ve ever smelled. And the best strain to grow — super stable and not picky at all!

D21 - Start of week three of veg for the second girl, while it is only the start of week two for the first girl as I had to replant her. I will probably do the first topping on the second girl this week but I'll see in a few days where she's at. I gave both girls around one liter of water @ pH 5.9. A bit on the low side as I used too much pH down but it'll be fine for one watering. D24 - Yesterday I switched my light from the seedlings program to the veg program, and I'm now reading around 500-600 PPFD across the canopy. On the high end for sure, so let's see how the girls handle it. However, the daytime temp in the tent jumped up to around 30 degrees C after I switched the lights. #tinytentproblems I also added some support to #1 as she has a relatively thin stem but large leaves, so the oscillating fan keeps knocking her around. The second girl also initially had a slender stem, so I guess it is their genetics. (#1 is 12 cm tall and 15 cm wide, while #2 is 20 cm tall and 35 cm wide.) I will need to top the second girl this week as she grows a lot each day. I'm considering mainlining her but haven't made up my mind yet. I gave both girls around one liter of water @ pH 6.5. D25 - A couple of days ago, switching the lights to the veg program made the cover crop explode and turn into a jungle. I decided to trim down the red clover to increase the airflow around the girls and reduce water use. I watered the girls only yesterday, but they were already thirsty again, so I think that the clover was drinking quite a bit as well. After cutting back the clover, I gave each girl around 1.2-liters of water @ pH 6.5. D27- Today was the last day in week three of veg for the second girl and the last day in week two for the first girl. I really should have topped the second girl already, so that will need to be done as soon as possible. She is 26 cm tall and 38 cm wide, while the first girl is 13 cm tall and 27 cm wide. Yesterday, I removed the support from the first girl as her stem had gotten more robust, so it was no longer necessary. Today, I started brewing compost tea (worm castings, neem meal, kelp meal, biochar, rock dust, algal limestone, bentonite, and molasses) which I will leave overnight and feed to the girls tomorrow.

10/15 This week saw a few snags. Both gorilla zkittlez girls are showing what looks like a Mg def i.e yellowing between veins and green veins themselves. This isn't the first time they've exhibited these symptoms. Currently the heaviest affected leaves are the lowest fan leaves farthest from the light. Aiming to keep it that way. I think it's pH swinging too low. I need to pay more attention to my feeds but sometimes I don't have the time to pH my water as properly as I should. The reason I say it's that and not a deficiency is because they are also showing signs of over feed (yellow leaf tips) only a one half-strength feed did this. There must be plenty of food left in the pot. I'm thinking the flip is gonna come at the end of the week. I'll clean up some lower foliage tomorrow or Sunday and let them grow the rest of the week. 10 weeks seems like a nice round number to me. More pics coming when I do my defoll. 10/16 added some pics and vids

This is a custom hybrid strain created by myself. Calling it Garlic Widow. It's history: Parents are Mother: Humboldt Lemon Garlic Kush X-Pollen: Dniafem White Widow Ive been working on this strain for the last year. Profiles include a strong garlic smell with a citrus tone taste. The white widow added more tricome production as well as increase the citrus flavors. Homogeneous. Took the best 1 out of 8 plants (size, growth, smell, tricomes) and cloned her. Clone was sprayed with colateral silver and bred with mother. See video/images for results.

After 7-8 weeks of flower she is ready to harvest. I give an update when she is dry and trimmt. I hope you enjoyed my little grow report. stay healthy

02.11.'24 After 5 days of drying, this little girl who was a little bigger than a meter gave 950 grams and a little bit of popcorn...this picking was 870 and a little bit of popcorn, and 4-5 weeks ago during a storm, one branch broke, which yielded about 100, but let's say 80 for sure, a total of 950 grams of beautiful, huge, potent buds

Hi... So this is my first time taking things a bit more seriously. Open for tips and advice. usually looking fore flavor rather than production. First week on 250w Also, pics are taken with the mobile... better pics next week

Everything after germination has been pretty smooth. The plants in veg had a couple small brown spots due to under watering but no extreme signs or any abnormalities.

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Nothing special to say, she's still happy and eat all I give, Buds keep coming along and bump, they are more and more fat and frosty each day 🌲❄️😋 💪keep removing some leaves 🍃 💧 Give water each 2/3 day 1.5 l Water + Roots + Zym + Bloom + Green Sensation (1 + 1 + 5 + 1 ml/l) 1.5 l Water + Roots + Zym + Bloom + Green Sensation + Sugar Royal (1 + 1 + 5 + 1 + 1 ml/l) 1.5 l Water + Roots + Zym + Bloom + Green Sensation (1 + 1 + 5 + 1 + 1ml/l) PH @6 💡Mars Hydro - FC 3000 50% 34 cm. Mars Hydro Fan kit Setting 6, don't need more for the moment, no smeel out of the tent. Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - Frozen Black Cherry Auto🌲🌲🍒🍒 https://anesiaseeds.com/product/frozen-black-cherry-auto/

Doubled the nutes this week, ive never followed the feeding chart because the regular feedings were enough. Since I'm outside and i figured I'd give it more to work with since I am trying to pull an obscene number with the size pot I'm working with and veg time. The nodes on the side branches are sort of reluctant to stretch out, same are big enough to train many aren't but nothing that should concern me. Had some crazy high winds today, I called that free training.

Harvest time I decide two hang the entire plant for a slow drying !! I finally removed the plant to much humidity it was around 80%😥 it’s raining hard those days anyway I checked every buds and no mold so I switched to my old method . 📦 humidity now it’s 55% 👌 5 days of drying I try to keep humidity around 60 and 17 degrees to keep all terpenes n flavour, terpene don’t like low humidity ,heat ,and of course lightning ,see y’a next update 💪💪💪 I had 34g of nice frosty trim ,for the first time I’ve made some nice bubble hash amazing I love it!!! I watch all of he’s videos he was the marster of hash RIP French cannoli 🙏🙏🙏

Ran into a lot of problems this week unfortunately. Some of buds developed a fungus(botrytis). Don't know how to stop this as I'm growing outdoors. Nevertheless, the buds that are clean are growing nicely. Hopefully into the home stretch of the grow now.

RQS Titan F1 week 5 Hello friends and followers, 2/25 This has been an exciting week. My Titan girls started flower 🌼. T3 in the 3-gallon air pot is larger at 6.5 inches. Last week I noticed her new growth was getting long and thin. A sure sign the pistils will emerge in a day or two. T3 started flower 🌼on 2/25. 2/26 Surprise surprise, T3 stretched an inch overnight and T2 about a.5 inch. That stretch meant I had a busy plant workday ahead. First, I defoliated T3 since I could see what I had to work with. Then because I’ve been following @yan402 on his Titan grow, I said I was going to top her. He said its ok if done correctly and at the right time. Well, fingers crossed 🤞, I hope it was not too late or cut in yhe wrong place since T3 was already in flower. Her short (.75-1” long) stems are so close to the stem, it was difficult getting the tie down pins placed. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering 😅 at 2.5 inches. T2 was defoliated on 2/26 as well. Her defoliation pictures above show how many I was able to trim off 7 and the leaf relative size. T2’s largest leaf is the size of a quarter and the smallest set I cut off, about the size of a penny. I keep supplementing and folar spraying with Cal-mag but the internodal chlorosis is still visible. I think Teapot gal (T2) has a copper excess.  Slowed Growth,  Fewer branches  Internodal Chlorosis  Stumpy roots (I won’t see this until I harvest and reveal the root ball) Given these symptoms of copper excess, and that RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. How I wonder? The copper wire is separated from the plant and soil by coco liner (which should be neutral, then coffee filters because I thought the soil would was out). Then the soil and plant. T2 is towering at 2.5 inches and started flower on 2/29. I expected a delay in her flowering time (4 days after T3) since she was transplanted to the teapot when T1 failed to thrive (maybe also the teapot cause?). Any time you train your plants, the stress causes delays in flowering then harvest. I defoliated T2 on 3/1 day 30. The pictures after defoliation show the tight node structure with 3 or 4 nodes crammed in only 1.5 inches of the main stem. Sheesh. So, as we enter March, we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest will be April 13-18. Be sure to come for my tea

Just wow on this body shapes, oils on the spiral buds

🍊👨‍🚀🧡 Depuis quelques temps je ne vois pas beaucoup ma culture car j'ai déménagé et qu'elle ne se trouve plus chez moi. Je passe la voir uniquement pour l'arroser, environ une fois par semaine. J'ajoute du Bioenhancer une fois sur 2. Certaines de mes Lemon Orange ont poussé plus que je ne m'y attendais ! La semaine prochaine, je vais retirer les sceaux que j'ai mis en dessous pour essayer de les remettre à la même hauteur que les autres. Sinon les plantes m'ont l'air d'être en bonne forme. Pourvu que ça dure ! 🧡👋 Intensité de la FC3000: 90% Ventilation : Extracteur mars hydro 6 pouces avec filtre à charbon puissance : 4/10 (24h/24h) + 3 ventilateurs à l'intérieur ( ON 8/24h). ils s'activent à un horaire différent. 🌟Venez me voir sur Instagram 🌠 https://www.instagram.com/hou_stone420/ 😘🍊🧡

Харвест на 70 дне. Вес на фото составил 85 плюс 30 не попало на фото и было снято чуть раньше. Итог - около 110. Мое мнение - тутанхамон снимать нужно раньше, для более выраженного хай эффекта.