Likes
Comments
Share
@Naujas
Follow
the girl continues to grow :) you can see the roots, the bottom of the pot:) we'll see what happens next:)
Likes
2
Share
@Growshh
Follow
Jus watering in calmag silica and brix. The terps are amazing. I got seeds tho, that one blueberry that herms jizzed on the grow!
Likes
200
Share
@Ferenc
Follow
Day 72, 21st of November 2020: Hi! Wao this is what I can say and luckily stoppe streching.... All LST has been removed as the plants remain the same so no need to keep them in "chains". Those Original Sensible girls 3 of them (Gelato, Runtz Gum, Do-Si-Dos OG)went crazy, except Black Ghost OG she did not strech much typical little indica lady. And the THC crystals alrady on the leaves on the Runtz Gum and Do-Si-Dos OG just simply beautiful. Buds are coming getting thick they are gorgeous only I can see some some sort of deficiency on Do-Si-Dos OG a bit on some leaves. The fertilization schedula isnthe same every 2nd day and happens with the mix and ratio above. Wedding Gelato is beautiful also I hope the nice purple colour will come out as well in late flowering stage. :) The lamp is on 11.30 min and off 12.30 min. Last week was 15 min longer light cycle.... So every week 15 min shorter light cycle until the 5th week. So far -30 min. It switches on at 6 am and off at 17.30 pm.
Likes
10
Share
Se aplico una apical y se afirmaron los brazos para que se vaya abriendo :3
Likes
7
Share
Hiiigh friends 🙌 Welcome to week 8. 😍 Due to too much unwanted stress, flowering is delayed. The big lady was unable to withstand the training. Her neck is broken. But she is far from giving up and will fight to the end.. 😊 See you next week. 👋 Arturo for KannaKullektiv 🙏
Likes
10
Share
Este año vamos a cultivar unas semillas test por cortesia de Paradise seeds Estos son los datos que tengo de las variedades #1051: Indica strain which stays small. #3951: Hybrid strain. #4251: Higher plant which is more Sativa than Indica. #3551: Hybrid plant with skunk, which grows rather quick and is purple colored El proyecto A va a estar en un tipo de condiciones diferentes al proyecto B
Likes
17
Share
@Targona
Follow
Technical and general parameters of the breeder: Sativa dominant citrus terps that hash makers and extractors will love. An excellent autoflowering hybrid that boasts an impressive 24% THC to match her amazing flavor with potency. Well recommended for novice growers looking for a low maintenance, yet extremely productive cultivar that will flower from seed to harvest in 9-10 weeks. This strain can grow to become one of the larger autoflowering hybrids, making it a wise choice for commercial growers looking for something special. Technical Specifications: Taste: Orange, Sweet, Sour, Creamy THC: Up to 24% CBD: < 1% Indoor harvest EU: 500 – 650 gr/m2 Indoor yield US: 1.6 – 2.1 oz/ft2 Harvest outside EU: 60 – 300 gr/plant Outdoor harvest US: 2 – 11 oz/plant Size: XXL Height: 110-150 cm Height US: 43 – 59 inches Flowering: 9 – 10 weeks Room: Indoor/Outdoor Gender: Feminized Genes: Sativa 70%/Indica 30% Genetics: Orange Sherbet Auto Autoflowering. Yes For cultivation I used: Cultivation area: 80x80x180cm 1x circulation fan: 15W LED lighting: Mars Hydro TS 1000 - 150W - vegetation and flowering 💡💡 Exhaust: pipe fan - RAMTT100 Odor filter: PRO-ECO HF carbon filter 160-240m3/h - 100mm - maximum air flow up to 240m3/h 4x textile flower pots 11l Substrate: Plagron Lightmix perlite coco coir Thank you to all my friends who support me in growing, who give me advice - @Happy_Rakosnicek, thank you to my friends from Grow Diaries for likes, advice and support 😍❤️❤️ Many thanks to the Fast Budsb team especially @fast_buds_jessie for providing the sponsor seeds 🌱🌱😍 Thanks for the likes and you can follow me on Twitter 🐦: @ Targona666 Many thanks to Mars Hydro, specifically @Coco_Pan2022 for providing the Mars Hydro TS1000 sponsor light💡💡😉 Smoking Review: I will add the buds after about 10-15 days of drying 💨💨
Processing
Likes
2
Share
She looks suuper happy and healthy,wonderful strain to grow,she's starting to show the pistils so she'll be in full flower in no time! Let's see how this wonderful lady performs, she smells crazy on her 13th day of flower,she's producing massive resin so far,stinks,I cannot believe how this lady is getting full of cristales so early,can't wait to smoke this 🤤 100% organic and biological grown
Processing
Likes
31
Share
Hey everyone 🤗. There isn't much to report this week. It was topped again, otherwise everything is like last week. She is developing well 👍. I wish you lots of fun with the update, stay healthy and let it grow 🌱🍀 You can buy this Strain at https://www.barneysfarm.com/blue-cheese-34 You can buy the fertilizer at https://www.greenbuzzliquids.com/ Type: Blue Cheese ☝️🏼 Genetics: Blueberry X Original Cheese 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 - 0.4 EC. Add Cal / Mag 2 ml per l water every 2 waterings . Ph with Organic Ph - Pulver to 5.8 .
Likes
12
Share
Week 3 going well. Topped her and doing a bit of lst to her as well hope everything goes well. Week 4 fead her with 25ml off grow auto from living Soils.
Processing
Likes
3
Share
Stinks... Haven't done much but water it. definitely forming some bigger buds but taking so long. As for the leaf, curling let me know if anyone has an idea. 2 weeks left. Will flush with flawless next week,
Likes
6
Share
This one was In-Z-Air by PerfectTreeSeeds, grown with GreenPlanetNutrients only! Check the other weeks to see the ones with AptusPlantTech! Great zkittles terpz, awesome structure, beautiful colours!
Processing
Likes
14
Share
@mheat
Follow
She is fattening up and has a great aroma! Trichomes are super cloudy...no amber. A few more weeks..
Likes
5
Share
@Jankky
Follow
Starting to pick up in smell, finally slowing down and finishing stretch.
Likes
8
Share
@Lazuli
Follow
Day 21, transplanted them in the autopot, just a few more days handwatering now
Likes
18
Share
@Luca90
Follow
I did a last defoliation on the NL and left the WA flowering! I kept the nutrient as RQS recommends and for now I didn’t not have any problems beside some few yellow marks on some leaves but nothing really noticeable
Likes
4
Share
Yooo what's brackin fam!!! Let's get into the last week of veg update!! So the girls are really thriving and pushing along I'm actually going to flip to flower this Sunday check th videos and as always fam thanks for stopping by lfg!!! ***************************************** 8/12/2024 Yooooo what's good gang last day of veg, flip to flower is manana lfgggggg
Likes
15
Share
@BicRed
Follow
9th Week I'm trying to address the deficiencies, I believe it's due to using coconut substrate. I am gradually reducing the daily light exposure by 1 hour until reaching 12/12. As it's the first time with Delta 9 in the cultivation, I have trow it foliarly.
Likes
9
Share
@Xabii
Follow
This is the start of my second grow and also second Northern Light Auto from RQS, the goal is to hit #1 in g/plant for that Strain. I didn't take as many notes as in the last grow but there are timelapses, some photos and metrics from probes. Started with 3 Seeds and then picked the 2 strongest. The System is a NFT System but due to the size of the tube and root growths the solution with submerge the roots ~70% later on. To combat that I use 3 small 1.5w air pumps, these are super silent, if one dies I got 2 more running and to be honest air pumps used in DWC systems are often oversized and rely on Broscience. In my Salad/Herb NFT Systems I don't use any air pumps and the plants are just fine and grow great. This time I added sprinklers to humidify the air inside the tube, slightly moisturize the Rockwool and speed up root growths. Spoiler: Was a great success :) The ratios for the fertilizers are not accurate in the following weeks, I have a 120l Reservoir that is filled 90-110l I top it up once or twice a week to sustain PH and EC, if you want to copy it just go by the EC and use the B (Calcinit) and A (Kristalon Blue/Orange) 50/50. I mix the solution myself with dry salts that I bought in bulk 25kg bags. 4l Water(distilled/RO preferably, tap water is OK) + 1kg salts mixes just fine, keep the solution dark and cool and it will stay stable for months. Dry salts don't expire if kept cool and dry so only mix what you need and keep the rest stored as dry salts. 40ml A + 40ml B is about 2EC and 6PH with my tap water, very similar to Canna, Plagron etc. isn't it? just with the twist that I pay ~20% of the known brands. P2O5, K2O, MgO etc. are always the same as long as they are produced by a good manufacturer, Yara is a world leader in fertilizer production just not to be found in you general hydroponics or hardware store. Any other known manufacturer is fine as well, pick the cheapest. Check Hoocho on Youtube to see a guide on how to mix your own solutions, it ain't that difficult trust me. From week 5 onwards I also use Oxygen granulate (KMPS, CAS-70693-62-8, 2KHSO₅ * KHSO₄ * K₂SO₄) if you want to use this check pool supply stores and buy the cheapest. Keep this one dry, cool and dark. I used a old pill bottle to keep some ready to go because it came in a 1kg container and I only need 2-4g per serving + the bottle has a silica pack in the cap. From week 6 onwards I used Haifa Grow Clean for Details check week 6, I use this one as dry salts and add it directly to the tank, it does not interact in a bad way with the solution. For meassurements I use a generic 8in1 Meter "PH-W218" branded by many companies, as usual, check stores and buy the cheapest. (Check week 1 for an image of it) I got mine from Aliexpress for ~70€ it uses the Tuya app so you can always check your metrics and export them aswell. The PH and EC probe are accurate and are giving me stable results for almost 1 year now, I re calibrate the PH probe once in a while and it is tops 0.15 off after a month, always double check your results with PH drops/paper. Bluelab is... A LOT more expensive for less value. For the timelapses I use 2 Tappo C210 2k Cameras, these have the ability to make the stream available trough RTSP so that you can access it trough a link in a browser and that way I snap a Screenshot with a raspberry pi :) after that I just render it with blender to a timelapse. Sadly they seem to have trouble with the bright lights and I get image trouble over the course of the day, if you have a recommendation hit me up :) The script I use to take the Images: #!/bin/bash ########################################################################################################################################## ##### A script to save images from a rtsp capeable IP cam, Tapo C210 (2k image quality) for example in my case. ##### Images are saved in a directory named "2024_01_01" for example, it uses the "date" command within the system it is running on. ##### You can then render the images to a timelapse, I use blender for that. ########################################################################################################################################## RTSP_URL_LEFT="rtsp://:@:/stream1" #sets the variable for cam LEFT access RTSP_URL_RIGHT="rtsp://:@:/stream1" #sets the variable for cam RIGHT access while true; do TIMESTAMP=$(date +"%Y_%m_%d_%H_%M_%S") #sets the timestamp variable DIRECTORYLEFT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for LEFT DIRECTORYRIGHT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for RIGHT mkdir -p "${DIRECTORYLEFT}" #makes a directory for each day if it doesn't exist for LEFT mkdir -p "${DIRECTORYRIGHT}" #makes a directory for each day if it doesn't exist for RIGHT ffmpeg -y -i "${RTSP_URL_LEFT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYLEFT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for LEFT ffmpeg -y -i "${RTSP_URL_RIGHT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYRIGHT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for RIGHT ################################################################################################################################ ##### Waits for 180 seconds, change that depending on how precise you want the timelapse to be, less waiting = more images ################################################################################################################################ sleep 180 done Hope you like my diary, leave a comment and a like if you like it :)