Likes
Comments
Share
@CHILLING_RACOONS
Follow
Hi Dear Friends, 👨🌾 👩🌾
Awesome plant, it growed a lot after topping.
It is the biggest of the cycle and it is really fast.
I notice a HUGE difference compared to other plants growed under the 480w quantum board.
The Kush mintz Fast is under the the XS2000 by ViparSpectra and it is bigger and stronger compared to other plants. Small distance between internodes and stems hard like rocks.
This lamp is really a beast, can't wait to try the new models!!
✅ VEGETATIVE week #5
📅this week goes from 12/12 to 18/12.📅
💡💡💡Viparspectra XS2000 is working at 50% power.
💉🔍Fertilization schedule:🔍💉
14/12 eposom salts 2g/l foliar and 1g/l irrigation
WE ARE BACK!!!
We are back after a little pause.
We take a break because we were too busy to post high quality diaries. In the last diaries we tried to post as good as possible and we have to publish about 6 or 8 diaries (in addition to these that we will publish shortly). We opened also an educational Instagram page, we growed a lot in a short amount of time BUT, Instagram suspended our account and we lost all our posts, I was so sad and disappointed... a lot of work lost in a night....
In this diary you will see our journey with Kush Mintz Fast by Original Sensible 🤩, sit down and enjoy the show!
We are growing in a 15L Smart Pot with Light Mix soil by BioBizz under the AWESOME XS2000 by Viparspectra 🤩
DATA SHEET:
Bubba Kush , Animal Mints, Secret Hybrid
Genetics: mostly Indica
Yield: 650g/m² indoor
flowering time: 50/55 days
THC: 25%
Aroma: cookie mint
Effect: happy relaxed
💸💸💸💸💸 Here you can buy seeds of this top shelf strain: https://originalsensible.com/original-sensible-seeds-kush-mintz-fast~21711
_______________________________________________________________________
🔧💡OUR SET UP💡🔧
✔️ 💲💲💲VIPARSPECTRA 🚀🚀🚀🌕🌕
ViparSpectra®️ XS2000 240W Infrared Full Spectrum LED Grow Light:
Excellent ratio between wattage and ppfd, excellent light penetraton, perfect light spectrum (it also has IR 🤩) and it has the best build quality on the market. Until now, built quality is really awesome. You can touch that quality. Materials are really strong, excellent driver and the best leds on the market. Heat dissipation is perfect, the lamp is never too hot and it has a passive dissipator so you will have zero noise. It also has IP65 certification. I like that this lamp is bigger than others, so the 240w of power are well distribuited on the space. Viparspectra has an awesome customer service, and shipping was creazy fast!
This awesome brand also offers 3 years warranty.
This lamp has no rivals.
A special thanks to Emily of Viparspectra ❤️❤️❤️❤️
HERE YOU CAN BUY THIS PROFESSIONAL LIGHT: https://www.viparspectra.com/products/xs-series-xs2000 or https://amzn.to/3dyUoJl
and here you can buy other awesome stuff: https://www.viparspectra.com
✔️ 💲💲💲MARSHYDRO 🚀🚀🚀🌕🌕
📦120X120 GROW TENT: an awesome box, easy and fast to assembly. Made by strong materials, solid zips and it is totally lightproof. The position of holes is optimal and the two lateral windows will make easier the work inside the box. There is also a double end, so you are 100% sure that dirt or liquids will not spill out. You can find it here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-48x48x80-1680d-4-x-4-size-keeps-all-light-in-top-quality-1680d-canvas-is-tear-proof-and-double-stitched-light-blocking-fast-installation-for-sale
💡TS 600 FULL SPECTRUM 100W LED GROW LIGHT : with this light you will achieve excellent buds, you will not need anything more. This lamp replace a 150w HPS lamp, but, with this Led Light you will smoke bigger, harder and tastier buds because Led have a complete spectrum and a powerful light penetration, so your plants will work as much as possible to make you happy. Psssssss it it extremely cheap and it is only 100w, your bills will never be too high, YOU HAVE NO EXCUSES!! Here if you want this little beast: https://www.mars-hydro.com/led-grow-light/mars-ts-series-led-grow-light/mars-tsw-600-led-full-spectrum-hydroponic-led-grow-light
Thank you Eleen of Marshydro❤️❤️❤️❤️
💣Quantum board - 480w - 4x120w Boards by Zhoangshan Koray Opto-Electronic Ltd.
Samsung LM301B 288 led/board 3000K 0dB noise
+24led/board led Osram 660nm
Efficiency 2.6 umol/J 220 lm/w
Driver: Meanwell HLG-480H-36B
💣Quantum board - 240w - 2x120w Boards by Shenzen Yuanhui Led Ltd.
Samsung LM301H 504 led 3500K 0dB noise
+24led/board led Osram 660nm
Efficiency 2.7 umol/J 220 lm/w
Driver: Meanwell HLG-240H-48B
-ESTRACTION FAN:
Blauberg 125 Turbo Pro Series
Maximum air flow: 430-560 m³ / h 50W 32-44 dBA
-FANS:
A)OSCILLATING FAN D.15cm 2 speeds 20w
B) COMPUTER FAN Sunon DP200A – 230V 20w (Strong, reliable and quiet)
C)Cornawall Electronics Multifan Turbo, three speeds, can be used both on support surfaces and mounted on the wall. High capacity, about 740 m3 / h. High silence and reliability.
💊💉💊FEEDINGS:
We used BioBizz light Mix
TOP CROP:
-DEEPER UNDERGROUND: to stimulate roots system
-TOP VEG: for a excellent growth in the vegetative phase
-GREEN EXPLOSION: to promote creation of bud sites and to allow a faster growth
-MICRO VITA: bacterias for equilibrate the soil and to make the plant healty
-BIG ONE: to stimulate bud sites and to stimulate resin production
-TOP BLOOM: to achieve excellent big and hard buds
-TOP CANDY: to feed the buds with molasses for a tastier smoke and to gain weight
-TOP BUD: to enlarge buds and to gain weight
PLAGRON: PK 13-14 to have big and hard buds and to feed plants with lower effort
ADVANCED NUTRIENTS: Sensi Cal-Mag Extra-> for cal mag deficiency
GROTEK: CAL MAG for cal mag deficiency
HESI: PowerZyme to clean and balance the soil. It feeds the plant cleaning the soil.
GHE: - Final Part (ex Ripen) accelerate the final flowering phase, dissolves minerals in excess
- Flash Clean to flush the plant and to be sure that all excesses are out from plant and pot
These two products improve A LOT the smoke of our babies
-PURPINATOR to stimulate flavonoids and to have a better taste and smell.
____________________________________________________________________________________________
🙏❤️ THANK YOU FOR BEING HERE ❤️🙏
Please leave a comment with your opinions, it is very important to us to have a comparison.
If you like our job, tap the weed button and follow us. It will be really appreciated.🙏
We want to thank again everyone that help us in our project. You support us to support our dream. ❤️
SPREAD THE LOVE OF THIS PLANT ALL AROUND THE WORLD
🌿Thank you again🌿
❤️Sweet hugs❤️
👨🌾CHILLING_RACOONS👩🌾
Likes
5
Share
@der_mycologe
Follow
Die be cherry macht sich prächtig ,sie hat den strech abgeschlossen und fängt an buds zu bauen. Sie hat eine ordentliche struktur und sie fängt an heftig zu harzen.klima und Ernährung passen.
Likes
12
Share
@MicroHidroGrow
Follow
Arranca la semana con una solución más cargada y las plantas atadas al limite. No puedo imaginar lo que deben ser las raíces. Pero hasta ahora la solución está siempre limpia. Los EMRO están funcionando a la perfección. Espero que empiecen a formarse bien las flores.
Día 17. Empezó el engorde. El estirón frenó. Ahora voy a esperar que las flores empiecen a tomar forma para luego hacer una defoliación y el último guiado, y así dejar todas las flores con una exposición a la luz de forma pareja. Estoy bastante contento y satisfecho con lo que vengo observando.
Día 20. Hice una defoliación de las hojas superiores. Cómo solamente tengo hasta 3 nudos debajo de la cabeza con flores, saqué las hojas grandes de arriba que hacían sombra a las flores bajas. De esa forma las flores de arriba desarrollan un poco más las hojas pegadas a las flores, pero no tanto como para hacer gran sombra. Y las flores del 3er nudo, se siguen alimentando de las hojas grandes que dejé. Este corte lo hice hace años en un SCROG de critical mass, y obtuve muy buenos resultados. Ahora a esperar el tan preciado engorde.
Día 21. Las flores ya empiezan a ganar volumen camino a su formación. Se las ve cambiando día a día. Por el momento sólo puedo agradecer que no ha habido inconvenientes. La solución se mantiene increíblemente limpia, siendo que por el volumen y amontonamiento de raíces que debe haber en los caños, debería haber aunque sea algo. Pero las EMRO vienen haciendo su trabajo bastante bien, así que fue una excelente inversión, y bastante accesible en precio. Mañana arranca la 4ta semana. Espero que sea una semana de grandes avances.
Likes
10
Share
Likes
1
Share
@RageTdavis
Follow
This week, sun pattern shifted. current spot only has light until 5 or sometimes even 4 pm. I seen a massive jump in size this week. One of my steaks lifted a tiny bit, just had to add 2 more for support. Now she will grow as the shape of the letter L I want to see one last push before flower 🌼 . The top of the main stalk cola. I'm still confused on, why it wants to flower but just conting growing in size. Almost reminds me of growing sunflowers
Processing
Likes
4
Share
@4F1M6
Follow
I started germination of 4 Gelat.Og beans on 29/12/2020. I pre moistened my rockwool cubes with ph balanced water to 6.4. Made sure the plugs were just damp and not soaked. Using a small wooden dowel I increased the size of the plugs pre made holes. Than I sowed my beans into the holes. Ripped off a small piece of rockwool and mulched it up. Lightly filled the holes in with the mulched rockwool. Than stuck the plugs into a misted humidity dome, to complete germination.
Shouldn't take anymore than 4-5 days to see some sprouts. Once I see some cotlydon leaves bursting to the surface. I will get the plugs planted into some 1 gallon pots. Plus get these ladies situated into their home. Cant wait!
Some background information on my experience with Gelat.Og. I've grown this one out several times and I'm just absolutely in love with these genetics. One of the best terp pallets I've came across. Extremely creamy and rich aroma with a kush kick... majestic!
She packs amazing bud structure and is a real branchy hauler. She packs a pretty large stretch, about 200% on average. Plus she has a bit longer of a flower time for a indica dominant... in my experience about 11 weeks.
She gets a strong demand for more phosphorus mid flower. A good spike with the pk booster and shes happy as Larry! Another Seedsman masterpiece right her! Amped to dive In to this grow.
Likes
35
Share
@madlangs
Follow
All going very well. No problems. All growing strong. It’s so much easier with autos indoors than it is outdoors temps went down to 28c in room. Apart from two days at 30c
19.5.21
Dg 6.2. 2.5L week 2 half strength
Wc 8.0. 1L week 2 half strength
Gb 8.0 1L week 2 half strength
Chem 8.3 1L week 2 half strength
Hubba 8.8 1L week 2 half strength
Cream 8.2 1L week 2 half strength
Gave all recharge. Mammoth p and 1ml silica
Used fish instead of grow ph6.4. Ec 800
22.9.21
Dg 3L
Gb 1L
Week 2 half strength gave fish instead of grow ph6.4
23.9.21 white crack got its first pre flower
24.9.21
Dg 4L
Wc 2L
Gb 2L
Gave all half strength veg, fish instead of grow. Recharge. Mammoth p and 0.5mlL silica ph6.4 ec800
24.9.21 Gave dg a good defoliation
25.9.21
Dg 35cm
Wc 19cm
Gb 23cm
Chem 14cm
Hubba 8cm
Cream. 13cm
Orange 1 5cm
0range 2 6cm
Likes
12
Share
@CanadianFillmore
Follow
Welcome visitors to growfessor theatre! Tonight we have LSD and Green Crack entering their final week, 9F, with a flush!
The LSD still has a strong fruity, citrus smell, lots of frost and is very sticky. The buds are not as large as I was hoping for, but they do seem to be very dense.
Green Crack bulked up a lot last week and I'm very impressed with the size and density of the buds. She's also frosty and sticky, with a smell that is potent but hard to describe other than it smells like weed.
Stay tuned for harvest, coming in 5-7 days!
Thanks growfessors for stopping by 👽🌳💚
Likes
27
Share
@KanOrganics
Follow
We made it to curing!
I chopped her about 1.5 weeks ago, she dried well, and has been curing for a few days now.
She could have went a few more days, but due to a PM outbreak in another tent, I wanted to get the whole grow room bleached for the next round, and wasn't taking any chances. We had a little bit of amber on non-leaf flower trichomes, so good enough!
This plant was a beast. The second best producer out of the a lineup of 9 this round. That would likely be the Kush genetics in her, and to top it off, she smells wonderful. Sweet and floral. We haven't sampled any yet, and infact, I had to quit smoking, so we'll see what my father has to say in a couple weeks when done curing.
After drying and partway through curing, we have approximately 19g of flower. We did a quick and rough trim with a machine trimmer, as we had 9 plants to take care of all at the same time, and didn't want them exposed to dry too long.
I give this plant the highest rating out of any indoor plant I've grown over the 2 years I've done indoor, from a growing aspect. I'll post the smoke report when it is done cured, but for now, 10/10 -- would recommend!
Likes
9
Share
@Vega0284
Follow
Had a great run with this grow. I learned ALOT about DWC, growing and myself. I think it would have been infinetly more successful if I would have just stuck to the feeding chart, and stopped "fixing things till they broke", but a great learning lesson and I am excited for my next grow.
Likes
18
Share
@DogDoctorOfficial
Follow
Hey fellow green thumbs! 🌿💚 The day has finally come—our Auto Northern Dragon Fuel from Super Sativa Seed Club has been harvested! After an exciting journey, we’re thrilled to share the details of this incredible plant’s final stage. Let’s dive into the harvest report!
🌟 Harvest Details:
Day 75: Harvest Day
• Harvest Date: Day 75
• Harvest Method: Our beautiful Auto Northern Dragon Fuel was harvested yesterday. After weeks of careful nurturing, the time was right to bring in this amazing plant. 🌿🌼
• Preparation: Before hanging, we meticulously cleaned the plant, removing all leaves without trichomes to ensure a smooth drying process and to enhance the quality of the final product. 🌿✂️
Current Drying Process:
• Method: The entire plant is now hanging upside down to dry. This method helps maintain moisture levels within the buds, allowing for a slower and more even drying process. 🌿🔄
• Environment:
• Temperature: 18-22°C (65-72°F)
• Humidity: 50-60%
Maintaining these conditions is crucial for achieving a perfect dry and preserving the plant’s aromatic and flavorful profile. 🌡️💧
🌟 Plant and Bud Characteristics:
Auto Northern Dragon Fuel:
• Bud Structure: Dense and sticky, with an impressive trichome coverage. The buds are beautifully formed, showcasing the robust genetics of this strain.
• Aroma: Even in the drying phase, the rich and potent aroma is unmistakable. Expect a delightful scent that hints at the powerful experience to come.
• Trichomes: A thick layer of trichomes covers the buds, promising a potent final product with a great flavor profile. 🌿✨
🌟 Care Tips:
• Drying Process: Patience is key. Allowing the plant to dry slowly will enhance the final quality, preserving both flavor and potency. Ensure good airflow around the hanging plant to prevent mold and mildew. 🌬️💧
• Trimming: Once the drying process is complete (typically 10-14 days), it will be time to trim the buds. This is where we’ll shape the final product and get it ready for curing. ✂️🌿
• Curing: After trimming, curing the buds in jars for at least 2-4 weeks will further enhance the flavor and smoothness. This final step is essential for achieving the best possible smoking experience. 🍁
🌟 Genetics Spotlight:
Auto Northern Dragon Fuel:
• Characteristics: Known for its robust structure and dense buds, this strain has shown remarkable resilience and impressive bud development throughout the grow. The final product promises to be potent and flavorful, thanks to the thick trichome coverage and rich aroma.
• Harvest Expectations: High-quality buds with a strong aroma and potent effects. The slow drying process will ensure the best possible preservation of cannabinoids and terpenes.
🌍🌿 Fun Fact:
Did you know? 🌿✨ Drying the entire plant slowly helps retain more terpenes, which are responsible for the plant’s aroma and flavor. This method also helps preserve the potency and quality of the buds, resulting in a smoother and more enjoyable experience.
For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week’s harvest has been particularly exciting, and there’s so much more to explore and learn together!
👉 Join me on YouTube Link in my profile 👈
🌟 Conclusion:
Harvesting Auto Northern Dragon Fuel at Day 75 has been a rewarding experience. With the plant now drying, we’re eagerly awaiting the final product. Stay tuned for updates on the drying, trimming, and curing process, and get ready for a high-quality harvest!
Happy growing, and see you next time! 🌿💚✨
#SuperSativaSeedClub #HarvestReport #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney
Likes
11
Share
@Nutrient_gro
Follow
gave Gaia green bloom last week and just been watering with cal mag. Starting to get this fruity mango smell
Likes
3
Share
@Elguacho420
Follow
Buenas a tod@s... Bueno.. novena y última semana de está red cookie gelato... ⚡🚀💣 Un éxito... Está que explota... La próxima es la cosecha... Las otras dos ya fueron cortadas por qué ya estaban al punto, al igual que las demas ya les iré comentando q tal va de sabor, olor y de más cositas... Las verdad me la pasé a lo grande... QUE VIVA EL AUTOCULTIVO!!! 💪🏻🙌🏻 🇦🇷🤝🏻🇪🇦⚕️
Likes
13
Share
@HeavyHead
Follow
Really starting to fatten up. Love the structure of this plant. Not crazy bushy and very simple to LST.
Seems to be just going crazy for the nutes, been going at about 90% strength and it’s still wanting more.
Been having to add tons of cal mag as my new place I moved to seems to have very soft water.
Still new to the advanced nutrients but love them so far. Even the stalks on these are sticky and building up :p
Likes
1
Share
@JunkSkunk
Follow
Day 64 of flower, the closer pics are one of the Blueberry cupcakes that is going to be the first to come down soon maybe a partial harvest tomorrow. Everything’s going well tho the light stress I caused has been fixed and all is looking well.
